Interskol FM-40/1000E
Diamond Core Bits & Milling Cutters1922
 |
For coves and part of a rule joint. Specifications • Shank Diameter: 1/2 • Dia Metric: 32 • Cut Length Metric: 31.7 • Overall Length Metric: 71 • Radius 1 Metric: 16
 |
The Halls High Speed Steel Countersink with 1/4in hexagon shank 3 flute 90° included angle. Designed for use with power tools and for use on metal.Size. 20.5mm.Angle. 90° .PTDHLLXCM20
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 13 • Dia Imperial: 33/64 • Cut Length Metric: 26 • Overall Length Metric: 72
 |
By raising the cutter, the top quirk is removed. Specifications • Shank Diameter: 1/4 • Dia Metric: 25.4 • Cut Length Metric: 15.9 • Cut Length Imperial: 5/8 • Overall Length more→Metric: 65.5 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 4
 |
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications • Shank Diameter: 1/2 • Dia Metric: 28 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 53 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 7.9 • Radius 1 Imperial: 5/16
 |
Diamond Cutter Dry Speed Delivers Long Life When Dry Drilling Hard Ceramics.Featur
 |
Pin guided rounding over cutters are ideal for panel work and edge mounting all can be used on natural timbers man-made particles and fibre boards. Popular uses include edging window frames glazin more→g bars cabinets table tops pencil rounds trophies shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Small solid guide pins can follow more intricate shapes in contrast to bearing guided cutters.Tooling :TC1/4in Shank. D =22 mmC =12.6 mmR =1/4 inchR =6.3 mmP =9 mmPTDTRE7E214TC
 |
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications • Shank Diameter: 1/2 • Dia Metric: 18.7 • Cut Length Metric: 9.5 • Cut Length Imperial: 3/8 • Overall Length Metric: 58 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 3
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
