Interskol FM-67/2200E (121.1.0.00)
Diamond Core Bits & Milling Cutters2310
 |
Makita Replacement 4 Way Countersink and Drill Bit. Drill Bit No.10 (M5) for Adapter D-73221. Specifications • Diameter: 3.2 mm • Pack Quantity: 1
 |
Cutter are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. Single flute hel more→ical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining the most abrasive anodised finishes. Specifications • Shank Diameter: 8 mm • Dia Metric: 6 • Cut Length Metric: 14 • Overall Length Metric: 80 • Type or Grade: Up-cut
 |
SNAP/CS Trend Snappy Countersink with heat treated tool steel countersink with a HSS drill. Adjustable for different length screws and can produce counterbored hole for woodplugs. The drill produce pi more→lot holes only. Comes with 1x 2.0mm (5/64in) Drill & C/S Size No.4, 1x 2.4mm (3/32in) Drill & C/S Size No.6, 1x 2.8mm (7/64in) Drill & C/S Size. No.8, 1x 3.2mm (1/8in) Drill & C/S Size. No.10 and 1x 3.6mm (9/64in) Drill & C/S Size. No.12.
 |
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hin more→ges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.
 |
Manufactured from a Cobalt-based HSS (M42), a premium grade high speed tool steel, heat treated to surpass the hardness of other HSS materials. The increased cobalt content helps retain hardness at el more→evated temperatures. This increased hot hardness makes the material especially suited for machining stainless steels and temperature resistant alloys. It also gives the material increased wear resistance needed for machining in highly abrasive cutting applications. M42 is also a very tough grade and can therefore cope with the most aggressive applications in most materials. The Aluminium Titanium Carbo-Nitride (AlTiCN) multilayer coating has a hardness of 3700HV which surpasses many other nitride …
 |
Solid Carbide rasp/burr. Coarse cut. For grinding, carving and shaping of glass reinforced plastics (GRP). Not suitable for plunge cutting. Use at speed 10000 -30000 RPM. Specifications • Sh more→ank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 20 • Overall Length Metric: 51
 |
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications • Shank Diameter: 8 mm • Dia Metric: 28.5 • Dia Imperial: 1 1/8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 64 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 7.9 • Radius 1 Imperial: 5/16
 |
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications • Shank Diameter: 1/2 • Dia Metric: 31.7 • Dia Imperial: 1 1/4 • Cut Length Metric: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 66 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 9.5 • Radius 1 Imperial: 3/8
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
