Interskol FMSh-100/710E
Diamond Core Bits & Milling Cutters1913
 |
Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door. A range of sizes available to suit 4mm thick strip from 10mm to 25mm width. Intumescent strip more→is used to create an effective barrier to both fire and smoke. Choose alternative bearings to suit other thicknesses of intumescent strip. Specifications • Shank Diameter: 1/2 • Dia Metric: 40 • Cut Length Metric: 10 • Overall Length Metric: 60 • Bearing Dia Metric: 32 • Rebate Metric: 4 • Type or Grade: 10mm strip
 |
Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutter breakage. Specifications • Shank Diameter: more→8 mm • Dia Metric: 16 • Dia Imperial: 5/8 • Cut Length Metric: 19 • Cut Length Imperial: 3/4 • Overall Length Metric: 65 • Bearing Dia Metric: 19 • Bearing Dia Imperial: 3/4 • Angle: 90
 |
Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door. A range of sizes available to suit 4mm thick strip from 10mm to 25mm width. Intumescent strip more→is used to create an effective barrier to both fire and smoke. Choose alternative bearings to suit other thicknesses of intumescent strip. Specifications • Shank Diameter: 1/2 • Dia Metric: 40 • Cut Length Metric: 20 • Overall Length Metric: 70 • Bearing Dia Metric: 32 • Rebate Metric: 4 • Type or Grade: 20mm strip
 |
Having two tungsten carbide cutting edges, these cutters are suitable for professional use. This cutter is ideal for fast cutting applications on MDF, softwoods, hardwoods and plywood. Shank: 1/4in. F more→eatures: For grooving, rebating and mortising TCT TCT Specifications: Dimensions: H:15.0 x W:1.9 x D:5.5 cm Colour: Multi Guarantee:5 years Material: Tungsten Carbide Model Number: FAIRB228
 |
Solid Tungsten Carbide economy cutter. Self-guiding 90 degree trimming only with Specifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: more→5 • Overall Length Metric: 38 • Angle: 83
 |
These staff bead are ideal for producing nosings and attractive edges. Edge cut only. Specifications • Shank Diameter: 1/4 • Dia Metric: 13.5 • Cut Length Metric: 12.7 • Cut Leng more→th Imperial: 1/2 • Overall Length Metric: 53 • Radius 1 Metric: 2
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 1/4 • Dia Metric: 20 • Cut Length Metric: 20 • Overall Length Metric: 59 • Type or Grade: Centre tip
 |
Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Can be used for curved panels if a copy pin is used. Specifications • Shank Diameter: 8 mm • Dia Metric: 45 • Dia2 Metric: 11 • Cut Length Metric: 17 • Overall Length Metric: 49.5 • Angle: 10
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
