Interskol FMSh-12/710
Diamond Core Bits & Milling Cutters1658
 |
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwoo more→d, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks, for quick identification. Produces a smooth round over profile, or an ovolo mould with quirks. Includes extra bearing B127A for round over effect. Specifications • D=1 inch • D=25.4 mm • B=9.5 mm • R=6.3 mm • OL=62 mm • Shank Diameter=8 mm
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 8 mm • Dia Metric: 14 • Dia Imperial: 35/64 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 68.5
 |
HSSCo 3 Flute 90° countersink. Specifications • Nominal Diameter: 10.0mm • Shank Diameter: 6mm • Overall Length: 50mm • Capacity: 2.5mm - 10.0mm Features and Benefits • P more→roduces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C
 |
For 4.0mm thick strip. For 15.0mm wide intumescent strip. Specifications • Shank Diameter: 1/2 • Dia Metric: 40 • Cut Length Metric: 15 • Overall Length Metric: 68 • Bearing more→Dia Metric: 32 • Rebate Metric: 4
 |
This cutter can be used to form the top portion of a handrail moulding when used in conjunction with Ref. C218X1/2TC. For stationary machines - 12000 RPM recommended speed. Specifications • Sha more→nk Diameter: 1/2 • Dia Metric: 82.7 • Cut Length Metric: 19 • Overall Length Metric: 81.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 51
 |
Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Can be used for curved panels if a copy pin is used. Specifications • Shank Diameter: 1/2 • Dia Metric: 41 • Dia2 Metric: 7 • Cut Length Metric: 12 • Overall Length Metric: 50 • Radius 1 Metric: 12
 |
Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Small diameter tools must be handled with care to avoid breakage. Singl more→e flute cutters should not be used in eccentric chucks. Specifications • Shank Diameter: 1/4 • Dia Metric: 5 • Cut Length Metric: 19 • Overall Length Metric: 51
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 14 • Dia Imperial: 9/16 • Cut Length Metric: 20 • Overall Length Metric: 58
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
