Interskol UShM-125/1100E 26.1.1.00
Cutting Discs237
 |
The Multi Construction Rapido Cutting Disc provides powerful and fast cutting performance across various materials. Its special abrasive mix enables work on various materials. In addition, the thin di more→sc offers easy and fast cutting with little force exertion, less noise and minimum dust. Use this disc for cutting metal, Inox, non-ferrous metals, stone, marble and plastic. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413, FEPA and oSa. It is compatible with angle grinders.Straig
 |
Makita's B-38560 Anti-Vibration Offset Diamond Wheel features 2 small shock absorbers within the flange system. These work to absorb vibration, limiting transferred vibration to machine and end user. more→The rubber rings also reduce tapping, allowing for smooth and efficient grinding. Not compatible with the PC5000. Features & Benefits • Low vibration • Less tapping • Segmented Diamond • High efficiency Specifications • Application: Dry grinding with concrete/granit
 |
Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in s more→tock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear …
 |
DeWalt Extreme Diamond metal cutting discs are intended as a direct replacement for bonded abrasive cutting discs. They are suitable for use on steel, stainless steel, cast iron, rebar, sheet metal, a more→luminium and non-ferrous metals. Specifications • Diameter: 125 mm • Thickness: 1.3 mm • Bore Size: 22.23 mmFeatures & Benefits• Economical: 1000+ cuts can be achieved with one disc • Increased safety: solid steel body greatly reduces risk of disc breakage • No shelf life: does not deteroriate over time (in proper storage conditions) • Diameter retention: each disc maintains its original diameter until the last cut • Less dust: substantial reduction in airborne …
 |
The BOSCH PROFESSIONAL Expert Turbo X-Lock 125 mm Multimaterial Diamond Disc is a top-of-the-line electric tool accessory designed for cutting various materials with precision and efficiency. Measurin more→g 125 mm in diameter, this diamond disc features a sleek black design that not only looks professional but also ensures durability and long-lasting performance. It is specifically engineered for use with electric tools, allowing for seamless integration and compatibility.T
 |
Flexovit Flap Discs are ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings. The angles of the flaps mean more abrasive makes contact with the workpiece than a more→conventional fibre disc which increases productivity. Suitable for use on Metal, wood and paint.Size: 125mm Bore: 22mmGrit: 80Additional Information:&bu
 |
The X-LOCK Multi Construction Cutting Disc cuts virtually anything without having to change discs. Made from a special abrasive mix, it enables working on various materials. In addition, the thin disc more→offers easy and fast cutting with little exertion of force, produces less noise and minimum dust and prevents blue discolouration or burr formation. Use this disc for cutting metal, Inox, non-ferrous metals, stone, soft tiles, marble and plastic. Changing cutting discs is fast and convenient thanks to the keyless X-LOCK system. X-LOCK cutting discs also fit standard angle grinders. Straight Cut virtually everything without disc changes Cutting disc for metal, inox, non-ferrous metal, stone, soft …
 |
Use this disc for grinding welding seams and coarse-sanding metal surfaces. Changing flap discs is fast and convenient thanks to the keyless X-LOCK system. X-LOCK flaps discs also fit standard angle g more→rinders.• Excellent Lifetime• X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications&bu
Wire & Cup Brushes212
 |
Price from £4.49
Compare prices5→Compare prices and buy Bosch 0.2mm Crimped Brass Wire Brush 50mm 6mm Shank 2608622008
The Wire Cup Brush delivers an extra-fine surface finish. This Wire Cup Brush is fitted with brass-coated crimped wire for light-to-medium
 |
Price from £6.49 up to £7.53
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Stainless Steel 100mm with 6mm Shaft
• Flat wire brush.• Crimped stainless steel filaments.• Shaft: ø6mm.• Diameter: ø100mm.• Maximum Speed: 4500rpm.Flat wire brush with crimped stainless steel filaments, 100mm width and a 6mm more→shaft.• Flat wire brush. • Crimped stainless steel filaments. • Shaft: ø6mm. • Diameter: ø100mm. • Maximum Speed: 4500rpm. • Model No. SFBS100Technica
 |
Price from £5.49
Compare prices4→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Wheel Brush 75mm 6mm Shank 2608622007
The Wire Wheel provides a good fine surface finish. Fitted with crimped wire, it is ideal for light-to-medium duty cleaning applications on small surfaces. The Wire Wheel is intended for removing anne more→aling colour on welded seams and is suitable for cleaning work on smaller stainless steel, aluminium or non-ferrous metal surfaces, on edges and in grooves. It is also suitable for removing rust, roughing, mat sanding, texturing and paint stripping. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for …
 |
Price from £2.95
Compare prices3→Compare prices and buy Faithfull Crimped Wire End Brush 25mm 6mm Shank WBS25E
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBS25E Wire End Brush has the following specifications: Type: Flat End. Face Diameter: 25 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £5.58 up to £5.95
Compare prices3→Compare prices and buy Sealey Decarbonising Brush Set 2pc
• Brassed and crimped steel brushes with flat and pointed fill. Suitable for decarbonising cylinder head ports and components.• Shank ø: 6mm.Brassed and crimped steel brushes with flat and pointe more→d fill. Suitable for decarbonising cylinder head ports and components.• Brassed and crimped steel brushes with flat and pointed fill. • Suitable for decarbonising cylinder head ports and components. • Shank Diameter: ø6mm. • Model No. VS1801Technical Specification:N
 |
Price from £3.27 up to £5.36
Compare prices6→Compare prices and buy Draper Hollow Cup Wire Brush, 50mm
Brassed crimped steel wire with 6mm diameter shank. Display packed.
 |
Price from £4.49
Compare prices3→Compare prices and buy Faithfull Crimped Wire Cup Brush 50mm 6mm Shank WBSI50
This Faithfull Wire Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. It can be used in industrial power tools at higher speeds. Type: Cup more→Maximum speed: 12,000/min.The FAIWBSI50 Wire Brsh has the following specifications: Face diameter: 50 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £7.49
Compare prices4→Compare prices and buy Bosch 0.3mm Crimped Inox Steel Wire Pencil Brush 25mm 6mm Shank 2608622127
The Pencil Brush provides a good fine surface finish. It is fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces. Due to its shape, the pencil brush is ideal for more→cleaning work in very hard-to-reach areas on stainless steel, aluminium and non-ferrous metal surfaces as well as in corners and the inside of pipes and profiles. It is also suitable for removing rust, roughing, matt sanding and paint stripping. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use …
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
