Intertool DT-0263
Cutting Discs220
 |
Lasts up to 4x longer than a standard multi material diamond discOn modern construction sites you need to cut a wide variety of hard materials, and these take their toll on tools. The Expert MultiMate more→rial Disc is the ideal accessory for busy construction professionals needing to cut concrete, brick, roofing tiles and reinforced concrete - because it simply keeps doing the job for longer.The high segments on this cutting disc are made from an advanced matrix of metal and diamonds, which is designed to stay razor sharp. These segments are laser-welded onto a hard steel body; and the sides are fluted to remove dust for efficiency and longevity.This mix of optimum diamond grits and advanced design …
 |
This 40 V angle grinder is ideal for cutting grooves in walls, deburring or derusting metal and cutting tiles or pipes. The powerful brushless motor delivers the necessary cutting and grinding power a more→nd ensures a long lifespan. Additionally, it is very low-maintenance
 |
DeWalt's Extreme Runtime series of accessories were designed in conjunction with the Flexvolt range and have been optimised for use with cordless power tools.
 |
The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into more→place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock cutting discs can be used in standard angle grinders as well as X Lock machines. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in …
 |
The X551 Expert for Metal has an impressive material removal rate on metal surfaces. The zirconia alumina and semi-friable aluminium oxide abrasive grit blend delivers a brilliant removal rate and lif more→etime on metal applications. Furthermore, its highly robust X-cloth with stable backing ensures durability and steady performances on tough surfaces. The grit is bonded using fully synthetic resin on X-cloth for optimal sanding behaviour. It is intended for deburring and welding preparation on carbon steel, mild steel, aluminium, non-ferrous metals and cast iron. It is also ideal for removing discolouration, stock and surface imperfections. It is available in angled or straight options on fibreglass …
 |
The X-LOCK Best for Ceramic Extra Clean Turbo Diamond Cutting Disc provides extra-clean cuts in porcelain. Its turbo rim is designed to achieve neat results in all kinds of hard ceramics, while the op more→timised diamond matrix delivers chip-free cuts. Use this disc for cutting ceramic, porcelain and fine stoneware. Changing cutting discs is fast and convenient thanks to the keyless X-LOCK system. X-LOCK cutting discs also fit standard angle grinders. • Extra-Clean Cuts in Porcelain • X-LOCK Best for Ceramic Extra Clean Turbo Diamond Cutting Disc provides extra-clean cuts in porcelain • Turbo rim for neat results in all kinds of hard ceramics • Optimised diamond matrix delivers …
 |
Featuring an ultra-slim profile of just 1mm, these discs offer exceptional precision, making them ideal for intricate and detailed metal cutting tasks. The 125mm diameter ensures versatility, enabling more→you to tackle a variety of projects with ease. Constructed from high-quality stainless steel, these discs ensure durability and resilience, making them suitable for demanding metal cutting applications. The set of 10 discs provides ample supply for multiple projects, offering long-lasting value and convenience. Features & Benefits • Bonded with fibreglass and resin to provide safety and optimum cutting performance • Extra thing disc thickness: 1mm for fast, precise cutting with minimal …
 |
Flat cutting disc designed for fast straight cutting on various metal working applications including steel, structural steel and sheet metal. Manufactured from premium quality aluminium oxide, which h more→as been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine.
Wire & Cup Brushes206
 |
Price from £9.99 up to £26.99
Compare prices7→Compare prices and buy Bosch 0.5mm Knotted Steel Wire Cup Brush 75mm M14 Thread 1608622029
The Wire Cup Brush offers a good coarse surface finish. It is fitted with knotted wire for heavy-duty cleaning applications on steel. This brush is suitable for removing heavy rust, underseal, paint o more→r varnish. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use with drills with a 6-mm shank.Wire cup brush – knotted wireSuitable for heavy duty cleaning work on medium to large metal surfaces, such as removing heavy rust, underseal, paint or varnish.Appropr
 |
Price from £3.49
Compare prices3→Compare prices and buy Faithfull Crimped Wire End Brush 25mm 6mm Shank WBS25E
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBS25E Wire End Brush has the following specifications: Type: Flat End. Face Diameter: 25 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £11.81 up to £12.95
Compare prices5→Compare prices and buy Draper Brassed Steel Crimped Wire Brush Set (6 Piece)
• Set includes a 25mm wire end brush, 75mm wire cup brush, and three wire wheel brushes (50, 75, 100mm) • Designed for light to medium-duty work and delivers rapid stock removal from a wide variety of more→surfaces • Hardened dipped brassed steel wire • Strong construction with crimping action • Suitable for cleaning, deburring and surface preparation • Fitted with a non-slip 6.35mm hex shank • Compatible with most drill drivers and drills with a 13mm chuckThis set of wire brushes is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The brushes are made from hardened dipped brassed steel wire, which gives a high level of durability and resistance&hell
 |
Price from £11.95 up to £13.71
Compare prices4→Compare prices and buy Sealey Wire Brush Set 5pc Brassed
• Suitable for use with power tools up to the maximum rated speed (4500rpm).• Shaft: ø6mm.• Contents: Brushes; Wire Cup; ø50mm, 75mm, Flat Wire; ø50mm, 75mm, ø25mm Decarbonising/C
 |
Price from £6.49 up to £7.53
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Stainless Steel 100mm with 6mm Shaft
• Flat wire brush.• Crimped stainless steel filaments.• Shaft: ø6mm.• Diameter: ø100mm.• Maximum Speed: 4500rpm.Flat wire brush with crimped stainless steel filaments, 100mm width and a 6mm more→shaft.• Flat wire brush. • Crimped stainless steel filaments. • Shaft: ø6mm. • Diameter: ø100mm. • Maximum Speed: 4500rpm. • Model No. SFBS100Technica
 |
Price from £6.95
Compare prices4→Compare prices and buy Stanley Crimped Steel Wire Cup Brush 75mm 6mm Shank STA36040
Designed for use with electric drills, this Stanley crimped wire brush is ideal for removing light rust and for general surface preparation tasks on metal. Features & Benefits • Crimped steel wir more→es • Less aggressive than twist knot brushes • Suitable for various metal preparation tasks • Designed for use in a standard electric drill Specifications • Diameter: 75mm • Pack Quantity: 1
 |
Price from £3.95
Compare prices3→Compare prices and buy Faithfull Crimped Wire Cup Brush 75mm 6mm Shank WBS75
This Faithfull crimped steel Wire Cup Brush is designed for light to medium-duty applications, such as cleaning metal surfaces prior to welding or painting. The wire brush is fitted with a 6mm (1/4in) more→shank and is designed to operate with power tools with a maximum speed of 4,500/min. Type: Cup.The FAIWBS75 Wire Cup Brush has the following specifications: Face Diameter: 75 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm crimped steel wire. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £15.95
Compare prices3→Compare prices and buy Lessmann 0.3 Steel Wire Cup Brush 50mm 6mm Shank LES435162
The Lessmann Cup Brush is fitted with 6mm shank and is ideal for working on medium to large areas. They are generally used for the removal of rust, paint, dirt or scale, and for polishing.Diame
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
