Intertool DT-0272
Cutting Discs264
 |
A flat metal cutting disc which is ideal for working on steel. Part of a range of Makita reinforced abrasive cutting and grinding discs which are suitable for use with grinders and disc cutters. Speci more→fications • Model No: D-18667 (replaces A-85313) • Diameter: 125mm • Thickness: 2.5mm • Bore: 22.2mm • Quantity: 1 Note generic image is shown for illustration purposes. Please refer to the description for the specifications of the item you will be purchasingFeatu
 |
Lasts up to 100x longer than a bonded cutting discCutting metals such as steel and cast iron has traditionally been tough on angle grinder discs, and many workers are familiar with the chemical smell more→of bonded discs burning away while they cut. With the Expert Diamond Metal Wheel, this smell can be consigned to the past – as can regular trips to a shop to buy new metal discs.The Expert Diamond Metal Wheel uses Bosch Diamond Technology, which means optimum quality diamond grits fixed to a steel body. This super-hard edge lasts many times longer than even the best bonded discs and can cut a wide variety of ferrous and non-ferrous metals with ease. It doesn’t shatter if dropped, produces no chem…
 |
These Makita Tungsten Carbide Grit Blades for X-LOCK grinders are suitable for cutting a variety of materials including plaster board, PVC, FRP & copper. Supports the X-LOCK system which allows for sa more→fe and easy disc installation and removal. Specifications • Diameter: 125 mm • Fitting: X-LOCK • Thickness: 2mm • Pack Quantity: 1 • TC Grit: 30/40 Features & Benefits • Suitable for cutting a variety of materials including plaster board, PVC, FRP & copper • Supports the X-LOCK system which allows for safe and easy disc installation and removal
 |
DeWalt Extreme Diamond metal cutting discs are intended as a direct replacement for bonded abrasive cutting discs. They are suitable for use on steel, stainless steel, cast iron, rebar, sheet metal, a more→luminium and non-ferrous metals. Specifications • Diameter: 125 mm • Thickness: 1.3 mm • Bore Size: 22.23 mmFeatures & Benefits• Economical: 1000+ cuts can be achieved with one disc • Increased safety: solid steel body greatly reduces risk of disc breakage • No shelf life: does not deteroriate over time (in proper storage conditions) • Diameter retention: each disc maintains its original diameter until the last cut • Less dust: substantial reduction in airborne …
 |
Up to 3x more precise than a standard ceramic diamond discThe tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore crucia more→l yet difficult. The Expert HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics.Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut.The Bosch Expert …
 |
Professionals Value Angle Grinders For Their Ability To Cut Tough Materials Like Concrete, Stone And Metal. With The Expert Carbide Multi Wheel This Wonderful Tool Can Be Even More Versatile, Efficien more→tly Cutting All Kinds Of Softer Materials Such As Wood, Plastic And Modern Composites. With The Expert Carbide Multi Wheel, Your Angle Grinder Becomes Even More Versatile. For Many Tradesmen, It May Be The Only Power Tool They Need.Features:- Exceptional Durability Is Built In With Bosch Carbide Technology.- Advanced Steel Body Keeps Constant Speed And Depth.- Extra Strong Laser Bonding Of Carbide Grit And Steel Body.- Long Life Cutting Multiple Materials- Click It On With X-Lock – The Fastest Ac…
 |
Lasts up to 4x longer than a standard multi material diamond discOn modern construction sites you need to cut a wide variety of hard materials, and these take their toll on tools. The Expert MultiMate more→rial Disc is the ideal accessory for busy construction professionals needing to cut concrete, brick, roofing tiles and reinforced concrete - because it simply keeps doing the job for longer.The high segments on this cutting disc are made from an advanced matrix of metal and diamonds, which is designed to stay razor sharp. These segments are laser-welded onto a hard steel body; and the sides are fluted to remove dust for efficiency and longevity.This mix of optimum diamond grits and advanced design …
 |
The Turbo Viper – Tva Diamond Blade Is Recommended For Dry Cutting Of Hard Materials Such Asgranite, Rustic Tiles, Klinker, Refractories, Slate And, Of Course, Porcelain Tiles. The Specific Design Of more→The Diamond Rim Of The Tva Diamond Blade By Rubi Offers Faster Cutting Speed In The Hardest Materials Without Sacrificing The Quality Of The Finish.Features
Wire & Cup Brushes214
 |
Price from £2.49
Compare prices3→Compare prices and buy Faithfull Crimped Wire Wheel Brush 50mm 6mm Shank WBS50C
This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and des more→igned to operate with power tools up to a maximum of 4,500/min. Shaft: 6mm (1/4in). Wire: 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.Diame
 |
Price from £5.49
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush 60mm 12mm 6mm Shank LES451161
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 12mmWire Height: 20mmOverall Length: 60mmWire Gauge: 0.30.Max Speed: 20,000/rpm.Addi
 |
Price from £4.95 up to £5.85
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Stainless Steel 75mm with 6mm Shaft
• Flat wire brush.• Crimped stainless steel filaments.• Shaft: ø6mm.• Diameter: ø75mm.• Maximum Speed: 4500rpm.Flat wire brush with crimped stainless steel filaments, 75mm width and a 6mm sh more→aft.• Flat wire brush. • Crimped stainless steel filaments. • Shaft: ø6mm. • Diameter: ø75mm. • Maximum Speed: 4500rpm. • Model No. SFBS75Technical Specification:D
 |
Price from £4.00 up to £5.79
Compare prices6→Compare prices and buy Draper Wire Brush, 28 x 100mm
For metal cleaning and rust removal. Crimped steel wire fill, 55mm brush length with 6mm diameter shank. Display packed.
 |
Price from £3.88 up to £5.77
Compare prices6→Compare prices and buy Draper Decarbonizing Brush Set (2 Piece)
Brassed crimped steel wire brushes with flat and pointed trims. Shanks 6 x 35mm long. Display packed.
 |
Price from £47.95 up to £56.49
Compare prices3→Compare prices and buy Sealey 38pc Cleaning Brush Set Injector Bore
• Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting.• 38-Piece set includes brass, steel and nylon brushes 8-19mm.• Soft grip handle.• One- more→Piece 150mm Extension.• Storage case included.Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting. 38-Piece set includes brass, steel and nylon brushes 8-19mm. Soft grip handle. One-Piece 150mm extension. Storage case included.Techni
 |
Price from £6.49
Compare prices4→Compare prices and buy Bosch 0.2mm Crimped Inox Steel Wire Pencil Brush 15mm 6mm Shank 2608622126
The Pencil Brush provides a good fine surface finish. It is fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces. Due to its shape, the pencil brush is ideal for more→cleaning work in very hard-to-reach areas on stainless steel, aluminium and non-ferrous metal surfaces as well as in corners and the inside of pipes and profiles. It is also suitable for removing rust, roughing, matt sanding and paint stripping. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use …
 |
Price from £5.95 up to £6.09
Compare prices5→Compare prices and buy Bosch 0.2mm Crimped Steel Wire Brush 70mm 6mm Shank 1609200271
The Wire Cup Brush delivers an excellent, fine-surface finish. It features crimped wire for light-to-medium
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
