Japan Racing JR34 9x20/5x108 ET25 DIA74,1

A I Tech Coppered Steel Open Wheel Nuts are available in a range of thread sizes and in a choice of 60 degree taper or radius type seats, or there is a 12 x 1.25mm flat seat nut available.Manufactured more→from high tensile steel, they are built to perform in the harshest of conditions and ideal for use on competition cars - race or rally. The copper surface coating means the nut is more secure when tight but is easier and smoother to take off or screw on, and will not corrode.The ultimate nuts for the most discerning competitor.Sold individually

These wheel nuts from Grayston are specifically designed to fit classic Wolfrace slot mag wheels which require a sleeve fitting with a tapered washer.Available in different thread options:Option 1: 1/ more→2" UNF thread with 11/16" (17.4mm) OD sleeveOption 2: M12 x 1.5 thread with 41/64" (16.3mm) OD sleeveOption 3: 7/16" UNF thread with 11/16" (17.4mm) OD sleeveOption 4: 3/8" UNF thread with 41/64" (16.3mm) OD sleeveOption 5: M12 x 1.25 thread with 41/64" (16.3mm) OD sleeveOption 6: M12 x 1.5 thread with 11/16" (17.4mm) OD sleeveOption 7: 7/16" UNF thread with 41/64" (16.3mm) OD sleeveOption 8: M14 x 1.5 thread with 11/116" (17.4mm) OD Sleeve

Grayston Wheel Bolts are available in a large range of thread and fitting options to suit most vehicle and wheel fitments. These bolts are ideal for when fitting non standard wheels to a vehicle where more→a longer length bolt or one with a different seat is required.Ideal for fitting non original wheels to a vehicleWide range of thread length and seat typesZinc plated steel for corrosion resistanceOptions explainedLoose 60 Degree and Loose Radius seat options refer to the bolt having a separate seating washer.Variable 60 Degree bolts allow for variation in wheel PCD's (Eg 108/110mm or 98/100mm). This allows wheels with a slightly different PCD to be fitted to the car.Length is measurement of