Kalibr MShU-125/1000KM
Cutting Discs270
 |
Flap discs have been developed primarily as an alternative to sanding discs and can be fitted directly onto an angle grinder without a backing pad. Lasting up to 25 times longer than sanding discs the more→y also provide a much better finish which will remain constant throughout the life of the disc. These zirconium flap discs suit the majority of metal grinding applications.Si
 |
Lenox MetalMax is a new alternative to abrasive cut-off discs. Its breakthrough diamond technology delivers extreme durability to help you maximise work efficiencies and reduce costs in your metal cut more→ting jobs. MetalMax blades are recommended for multiple types of metal including steel, sheet metal, stainless steel, rebar, cast iron, aluminium and non-ferrous metals. Designed for use in the same power tools as bonded abrasive discs, at the same RPMs and feed forces, MetalMax blades can be used without having to change any operating settings. Specifications • Diameter: 125mm • Thickness: 1.3mm • Arbor: 22.23mm
 |
Lasts up to 4x longer than a standard multi material diamond disc - On modern construction sites you need to cut a wide variety of hard materials, and these take their toll on tools. The EXPERT MultiM more→aterial Disc is the ideal accessory for busy construction professionals needing to cut concrete, brick, roofing tiles and reinforced concrete - because it simply keeps doing the job for longer. The high segments on this cutting disc are made from an advanced matrix of metal and diamonds, which is designed to stay razor sharp. These segments are laser-welded onto a hard steel body; and the sides are fluted to remove dust for efficiency and longevity. This mix of optimum diamond grits and advanced …
 |
Fast and Powerful Cutting - The X-LOCK Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced pheno more→l resin, which copes with demanding applications while delivering good results. Moreover, the disc's precision-manuf
 |
Lasts up to 100x longer than a bonded cutting disc - Cutting metals such as steel and cast iron has traditionally been tough on angle grinder discs, and many workers are familiar with the chemical sme more→ll of bonded discs burning away while they cut. With the EXPERT Diamond Metal Wheel, this smell can be consigned to the past – as can regular trips to a shop to buy new metal discs. The EXPERT Diamond Metal Wheel uses Bosch Diamond Technology, which means optimum quality diamond grits fixed to a steel body. This super-hard edge lasts many times longer than even the best bonded discs and can cut a wide variety of ferrous and non-ferrous metals with ease. It doesn’t shatter if dropped, produces no c…
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
If you like to take care of every detail in your home and own the latest products that will make your life easier, purchase Cutting disc RUBI superpro r31933 at the best price.. Colour: Silver
 |
Impressive Removal Rate - The X551 Expert for Metal has an impressive material removal rate on metal surfaces. The zirconia alumina and semi-friable aluminium oxide abrasive grit blend delivers a bril more→liant removal rate and lifetime on metal applications. Furthermore, its highly robust X-cloth with stable backing ensures durability and steady performances on tough surfaces. The grit is bonded using fully synthetic resin on X-cloth for optimal sanding behaviour. It is intended for deburring and welding preparation on carbon steel, mild steel, aluminium, non-ferrous metals and cast iron. It is also ideal for removing discolouration, stock and surface imperfections. The X551 Expert for Metal is …
Wire & Cup Brushes213
 |
Price from £4.91 up to £5.36
Compare prices6→Compare prices and buy Sealey Flat Wire Brush Stainless Steel 75mm with 6mm Shaft
• Flat wire brush.• Crimped stainless steel filaments.• Shaft: ø6mm.• Diameter: ø75mm.• Maximum Speed: 4500rpm.Flat wire brush with crimped stainless steel filaments, 75mm width and a 6mm sh more→aft.• Flat wire brush. • Crimped stainless steel filaments. • Shaft: ø6mm. • Diameter: ø75mm. • Maximum Speed: 4500rpm. • Model No. SFBS75Technical Specification:D
 |
Price from £2.95
Compare prices3→Compare prices and buy Faithfull Crimped Wire End Brush 25mm 6mm Shank WBS25E
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBS25E Wire End Brush has the following specifications: Type: Flat End. Face Diameter: 25 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £3.89 up to £5.95
Compare prices5→Compare prices and buy Bosch 0.2mm Crimped Steel Wire Wheel Brush 75mm 6mm Shank 1608622015
Fine Finish on Steel - The Wire Wheel provides a good fine surface finish. Fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces, it is ideal for removing annealin more→g colour on welded seams. The wire wheel is suitable for cleaning work at high circumferential speeds on smaller steel surfaces, edges or in grooves. Moreover, it is suitable for removing rust, roughing, mat sanding and paint stripping. It is intended for use with drills with 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother …
 |
Price from £7.49
Compare prices4→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Wheel Brush 100mm 6mm Shank 1609200273
Fine Finish on Steel - The Wire Wheel provides a good fine surface finish. Fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces, it is ideal for removing annealin more→g colour on welded seams. The wire wheel is suitable for cleaning work at high circumferential speeds on smaller steel surfaces, edges or in grooves. Moreover, it is suitable for removing rust, roughing, mat sanding and paint stripping. It is intended for use with drills with 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother …
 |
Price from £6.95 up to £8.40
Compare prices4→Compare prices and buy Sealey Wire Brush Set 8pc Brassed
• Suitable for use with power tools up to the maximum rated speed (4500rpm).• Shaft: ø6mm.• Contents: Brushes; Flat Wire ø25mm (x1), ø40mm (x1), ø50mm (x1), ø65mm (x1), ø more→75mm (x1), Removable Shafts (x3).• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power tools up to the maximum rated rpm. Crimped brassed steel filaments add extra rigidity and cleaning power. Contents: Brushes; Flat Wire ø25mm (x1), ø40mm (x1), ø50mm (x1), ø65mm(x1), ø75mm (x1), Removable Shafts (x3).• Suitable for use with power tools up to the maximum rated speed (4500rpm). • Shaft: ø6mm. • Contents: Brushes; Flat Wire …
 |
Price from £9.95
Compare prices3→Compare prices and buy Lessmann 0.25 Brass Wire DIY Cup Brush 50mm 6mm Shank LES43012607
The Lessmann DIY Cup Brush is fitted with 6mm shank. It has been designed for working on large surfaces, generally for the removal of rust, paint, dirt or scale, and for polishing. 430.123.07: Wire: 0 more→.35 Steel, Diameter: 50mm.430.133.07
 |
Price from £2.95 up to £3.58
Compare prices6→Compare prices and buy Sealey Flat Wire Brush Ø50mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB50Technical Specification:D
 |
Price from £4.00 up to £5.16
Compare prices6→Compare prices and buy Draper Hollow Cup Wire Brush, 75mm
Brassed crimped steel wire with 6mm diameter shank. Display packed.
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
