Kraissmann 180 SGW 190
Multi Tool Blades398
 |
Price from £23.05 up to £25.95
Compare prices5→Compare prices and buy Bosch Expert MAVZ 116 RT Starlock Max Oscillating Multi Tool Sanding Plate
Lasts up to 100x longer than standard sandpaper - Small but tough sanding jobs to remove old material and prepare surfaces for working can be almost impossible with conventional sanders or by hand. Ev more→en if you can reach the surface, these jobs destroy sandpaper. With the EXPERT Sanding Plate however, you can reach corners and sand difficult materials with your oscillating multitool. Using Bosch Carbide Technology, grits of the hardest metal are robustly fixed to the surface. This sharp grit remains fully effective over its long lifespan because you can clean it with a solvent. The EXPERT Sanding Plate is designed for multiple materials and users. The coarse, open grains of the RT2 (grit size …
 |
Price from £1.99 up to £2.49
Compare prices5→Compare prices and buy Dremel 432 Sanding Band 13mm G12 0, Pack of 6
Dremel is the inventor of the world famous Multi-Tool System that can be used for a great number of projects both indoor and outdoor; for a wide variety of applications such as engraving, carving, rou more→ting, cutting, sanding, polishing and more. Features and Benefits Long-lasting grain Ensures consistent, even-spread sanding Box Contains 6 x 13 mm Fine 120 Grit Sanding Band Multi pack Typical Applications For rough shaping and smoothing wood and fiberglass Removing rust from metal surfaces and shaping rubber surfaces Notes Shank diameter 3,2 mm Working diameter 13,0 mm Maximum RPM 35.000 1/min
 |
Price from £5.29 up to £5.49
Compare prices4→Compare prices and buy Dremel 7mm x 100mm Multi-Purpose Low Temperature Glue Sticks 105 - 140 C R
To be used on Dremel model 920 (105) and 930 (low-temperatur
 |
Price from £4.49 up to £11.69
Compare prices4→Compare prices and buy Dremel 2.4mm Engraving Cutter REF.107 - 26150107JA
A high-speed cutter designed for precision rotary engraving. USES: Ideal for detail engraving, carving and routing in wood, fibreglass, ceramics, plastic, jewellery and soft metals. TIPS: Use the side more→s of the cutter (rather than the tip) for effective engraving. The tip cuts poorly and can break under pressure. Do not use this bit with hardened materials. Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact). If chattering occurs, increase speed. Shank size 3.2mm Pack Qty 3
 |
Price from £37.99 up to £73.95
Compare prices5→Compare prices and buy Makita 4 Piece Starlock Tiling Multitool Oscillating Blades Set B-67496
Makita accessory set for oscillating multi tools. Starlock fitment. Designed specifically for tiling applications, this accessory set contains four accessories which are ideal for tackling a range of more→common tiling jobs. Contents • B-64923 Plunge Cut • B-64989 Plunge Cut • B-65028 Plunge Cut • B-65062 Plunge Cut
 |
Price from £14.95
Compare prices3→Compare prices and buy Smart 2 Piece OIS Oscillating Multi Tool Rapid Wood Blade Set H2RWK
The Award-winning Rapid Wood blades are now the best blade for all timber cutting. The new Smartcut design means these blades will cut faster, neater and deeper than any other wood blade. Great for cu more→tting timber, hardwoods (oak), laminate flooring. The Rapid Wood blades have a curved tooth design for maximum precision when starting a cut. A new tooth style for a very fast, clean cut in timber! And increased blade depth of 51mm to cut all the way through 2? timber. Smartcut wood blades perfect for fast precise cutiing in wood and soft plastics. Available in convenient two piece pack with 1 x 32mm and 1 x 63mm blade. PLEASE NOTE These accessories are not compatible with Fein 'Starlock' fittings.&helli
 |
Price from £7.19 up to £9.95
Compare prices4→Compare prices and buy Dremel 3.2mm Stainless Steel End Brush with 3.2mm Shank Ref No.532, Pack o
These versatile brushes are ideal for removing rust and corrosion, polish metal surfaces, deburr and blend surface junctures or clean electrical components. Features and Benefits Stainless steel brush more→es Does not cause "after rust" when used on corrosive-resis
 |
Price from £13.99 up to £14.95
Compare prices4→Compare prices and buy Dremel 3.2 Mm Multitool Glass Drill Bit 26150662JB
This diamond-impregn
 |
Price from £3.95 up to £5.87
Compare prices4→Compare prices and buy Sealey Rotary Tool Cutting Disc Set 138pc
• For cutting, trimming and deburring in small confined areas.• Compatible with Sealey and most popular branded rotary tools.For cutting, trimming and deburring in small confined areas. Compatible wit more→h Sealey and most popular branded rotary tools.• For cutting, trimming and deburring in small confined areas. • Compatible with Sealey and most popular branded rotary tools. • Model No. RTA138CGDTechni
 |
Price from £3.00
Compare prices4→Compare prices and buy Dremel 85422 19.8mm Silicon Carbide Grinding Stone
Efficient and highly durable, these class-leading Dremel grinding stones come in a range of materials and sizes to suit every need. Features and Benefits Long-lasting abrasive Highly efficient alumini more→um oxide or long-lasting silicon carbide abrasive material, depending on model Available in a range of sizes to suit any application Notes Shank diameter: 3.2 mm Maximum RPM: 25,000 1/min
 |
Price from £11.95 up to £13.99
Compare prices5→Compare prices and buy Bosch Expert GOP Multi Tool Depth Stop 2608000590
Cutting Depth Control - The Expert Depth Stop provides control of cutting depth when using segment saw and plunge-cutting blades. It features a continuously variable adjustment for defining the cuttin more→g-depth limits with precision. It is intended for use on all materials. This depth stop is suitable for use with all Starlock, Starlock Plus and Starlock Max tools as well as common Bosch multi-tools. Features and Benefits • Cutting Depth Control • Expert Depth Stop provides control of cutting depth for segment saw and plunge-cutting blades • Features a continuously variable adjustment for defining cutting depth with precision Specifications Height: 25mm
 |
Price from £4.19 up to £7.95
Compare prices4→Compare prices and buy Dremel 0.8mm Engraving Cutter REF.108 - 26150108JA
A high-speed cutter designed for precision rotary engraving. USES: Ideal for detail engraving, carving and routing in wood, fibreglass, ceramics, plastic, jewellery and soft metals. TIPS: Use the side more→s of the cutter (rather than the tip) for effective engraving. The tip cuts poorly and can break under pressure. Do not use this bit with hardened materials. Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact). If chattering occurs, increase speed. Shank size 3.2mm Pack Qty 3
Important!
Compatibility with specific Multi Power Tools models should be checked with manager of online store immediately before purchase.
Compatibility with specific Multi Power Tools models should be checked with manager of online store immediately before purchase.
