Kress KU720
Cutting Discs128
 |
Lasts up to 4x longer than a standard multi material diamond disc - On modern construction sites you need to cut a wide variety of hard materials, and these take their toll on tools. The EXPERT MultiM more→aterial Disc is the ideal accessory for busy construction professionals needing to cut concrete, brick, roofing tiles and reinforced concrete - because it simply keeps doing the job for longer. The high segments on this cutting disc are made from an advanced matrix of metal and diamonds, which is designed to stay razor sharp. These segments are laser-welded onto a hard steel body; and the sides are fluted to remove dust for efficiency and longevity. This mix of optimum diamond grits and advanced …
 |
Powerful Cuts - The Multi Material Circular Saw Blade delivers powerful cuts in a wide range of materials. Its high-quality precision-groun
 |
Milwaukee Wood / Metal / Plastic Universal Saw Blades. Its even width guarantees good cutting stability, excellent guidance and straight edge cutting through many different materials. Bi-metal quality more→cutting teeth with 8% cobalt for ultimate performance and extended lifetime. Specifications Blade Length: 150mm Teeth per Inch: 8/12 Max. Cutting Capacity (Aluminium): 3-10mm Max. Cutting Capacity (Non Ferrous Metals): 3-10mm Max. Cutting Capacity (Plastic Pipes): 3-100mm Max. Cutting Capacity (PVC): 10-50mm Max. Cutting Capacity (Sandwich Material): 5-100mm Max. Cutting Capacity (Steel): 3-10mm Max. Cutting Capacity (Wood with Nails): 5-100mm Pack quantity: 50 Features and Benefits • Bi-metal …
 |
DeWalt Extreme Diamond metal cutting discs are intended as a direct replacement for bonded abrasive cutting discs. They are suitable for use on steel, stainless steel, cast iron, rebar, sheet metal, a more→luminium and non-ferrous metals. Specifications • Diameter: 150 mm • Thickness: 1.3 mm • Bore Size: 22.23 mm Features and Benefits • Economical: 1000+ cuts can be achieved with one disc • Increased safety: solid steel body greatly reduces risk of disc breakage • No shelf life: does not deteroriate over time (in proper storage conditions) • Diameter retention: each disc maintains its original diameter until the last cut • Less dust: substantial reduction in …
 |
Lasts up to 50x longer than a Bi-Metal blade in tough material - The sheer abrasiveness of cement fibre board means it is one of the toughest materials for your recip saw blade. For installers, plumbe more→rs, electricians and any tradesmen involved in maintenance and restoration, however, cutting these boards is essential. The EXPERT ‘Fiber Plaster’ is designed to cut fibre plaster boards effectively over a long lifetime. Its extreme durability comes courtesy of Bosch Carbide Technology, integrating the hardest metal into an advanced tooth design. The relatively short, pointed blade gives good control and access to tight spaces: it is designed with productivity in mind. The Bosch EXPERT ‘Fiber Plaste…
 |
These Metal Cutting Sabre Saw Blades are made from HSS Fully-Hardened Super-Speed Steel. Suitable for cutting applications in metal, aluminium and non-ferrous metals. Manufactured for precision and st more→ability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK. Features: Application: Metal Type: HSS TPI: 18 Length: 150mm Qty: 5 Specifications: Dimensions: H:20.9 x W:0.9 x D:4.7 cm Colour: Multi Guarantee:5 years Material: Metal Model …
 |
These Lenox lazer CT carbide tipped reciprocating saw blades have high performance carbide tips which are welded to increase durability and to prevent tooth loss. The tall blade profile delivers strai more→ght cuts and long life in demanding metal cutting applications. This range of high durable blades has up to 10x longer life than the standard Bi-metal recip saw blades. Specifications • Length: 150mm • TPI: 8 • Pack Quantity: Pack Of 1 Features and Benefits • Engineered for fast performance • 10X longer life than Bi-Metal reciprocating saw blades • Straight cuts in large diameter materials
 |
Nail embedded wood, non-ferrous, insulation. Plunge cutting especially in window frames.Features
Wire & Cup Brushes331
 |
Price from £4.91 up to £5.36
Compare prices6→Compare prices and buy Sealey Flat Wire Brush Stainless Steel 75mm with 6mm Shaft
• Flat wire brush.• Crimped stainless steel filaments.• Shaft: ø6mm.• Diameter: ø75mm.• Maximum Speed: 4500rpm.Flat wire brush with crimped stainless steel filaments, 75mm width and a 6mm sh more→aft.• Flat wire brush. • Crimped stainless steel filaments. • Shaft: ø6mm. • Diameter: ø75mm. • Maximum Speed: 4500rpm. • Model No. SFBS75Technical Specification:D
 |
Price from £4.07 up to £5.27
Compare prices6→Compare prices and buy Draper Decarbonizing Brush Set (2 Piece)
Brassed crimped steel wire brushes with flat and pointed trims. Shanks 6 x 35mm long. Display packed.
 |
Price from £6.64 up to £7.56
Compare prices6→Compare prices and buy Sealey Conical Wire Brush Ø100mm M10 x 1.5mm
• Suitable for use with power tools up to the maximum rated rpm.• Twisted steel filaments give more aggressive cleaning action - ideal for heavy rust removal.Suitabl
 |
Price from £29.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Knot Wheel Brush 115mm M14 Thread LES472217
The Lessmann Knot Wheel Brushes are for grinders, angle grinders and stationary machines, used in the preparation and re-working of bolt fillet and butt welds. They remove scale, rust, paint, slag, ru more→bber residue and can be used for de-burring. They are filled with a special high tensile strength steel wire in order to meet the exacting requirements during use.This Lessmann Knot Wheel Brush has the following specification: Diameter: 115mm.Width: 14mm.Bore: M14.Wire Gauge: 0.50.Wire Type: Steel.Max RPM: 12,500/min.Addi
 |
Price from £7.49
Compare prices3→Compare prices and buy Faithfull Twisted Knot Wire Wheel Brush 100mm M10 Thread WBTC100MC
Faithfull Conical Knot Brush with high tensile steel wire. Ideal for work in hard-to-reach places such as edges or corners. Suitable for the removal of slag, rust, scale or even dried cement. Max. Cut more→ting Speed: 12,500 rpm.Type: Knot conical Diameter: 100 mm Thread: M10 x 1.5 Wire: 0.5 mm twist knot steel Conforms to ISO 9001. and DIN EN1083-1 and 2Additional Information:&bu
 |
Price from £20.49 up to £28.95
Compare prices7→Compare prices and buy Bosch Professional Heavy Metal 90x0.5x150 Mm M14 Brush Cup 1608614001
Knotted Wire For Heavy-Duty Cleaning Applications In Metal Fits Ggs 6 And Ggs 8 Straight Grinders With M14 Thread. Metal Wire Cup Brush Provides An Extra-Coarse Surface Finish Suitable For Cleaning Wo more→rk On Medium To Large Steel Surfaces, Such As Removing Heavy Rust, Underseal, Paint Or Varnish Brush Wires Are Available In Different Thicknesses For Variable Levels Of Abrasive Needs. Thicker Wires Are More Aggressive, Producing A Coarser Yet Faster Surface Finish, While Thinner Wires Deliver Finer, Smoother Surface Results. It Is Intended For Use With Angle Grinders With An M14 Thread.Specific
 |
Price from £54.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Knot Cup Brush 125mm M14 x 2.0 Thread LES487217
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special s more→teel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Stability bridle fitted. Diameter. 125mm.Bore. M14.Wire Gauge. 0.50.Wire Type. Steel.Max. R.P.M. 6,500.Additiona
 |
Price from £41.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Knot Cup Brush 100mm M14 x 2.0 Thread LES486217
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special s more→teel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Stability bridle fitted.Diameter
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
