Kress PK 850 WS
Cutting Discs241
 |
Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs more→must never be used for grinding and must always be presented to the workpiece at an angle of 90. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work
 |
• Aluminium oxide flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require more→backing pad.• Depressed centre disc suitable for electric and air tools.• Size/Bore: ø125/22mm.
 |
Fast Cuts in Concrete - The Best for Concrete Diamond Cutting Disc provides fast cuts in concrete. Its laser-welded diamond cutting segments with a 15-mm height are robust for rapid cuts. It features more→speed stripes that are integrated in the diamond segment and minimise side friction, enabling high-speed work. Additionally, its optimised diamond matrix delivers the fastest cuts. Use this disc for cutting all sorts of concrete. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Fast Cuts in Concrete • Best for Concrete Diamond Cutting Disc provides fast cuts in concrete • Laser-welded diamond cutting segments (15-mm height) are robust for rapid …
 |
The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into more→place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock cutting discs can be used in standard angle grinders as well as X Lock machines. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in …
 |
The Marcrist BF850 AkkuMAX Turbo Diamond Blade is a high-performanc
 |
The Faithfull Zirconia Abrasive Jumbo Flap Discs are designed for use on angle grinders. Jumbo discs contain up to 40% more abrasive than standard flap discs. Manufactured from long lasting Zirconia A more→lumina and resin bonded for extra strength. Suitable for use on wood, metal, plastic and stainless steel. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces.1 x Faithfull Zirconia Abrasive Jumbo Flap Disc ZA80 125mm. 80 grit is suitable for final grinding. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces. For use with a 125mm angle grinder. Max. Speed: 80m/s 12,200 RPM.Additional Information:&bu
 |
Featuring an ultra-slim profile of just 1mm, these discs offer exceptional precision, making them ideal for intricate and detailed metal cutting tasks. The 125mm diameter ensures versatility, enabling more→you to tackle a variety of projects with ease. Constructed from high-quality stainless steel, these discs ensure durability and resilience, making them suitable for demanding metal cutting applications. The set of 10 discs provides ample supply for multiple projects, offering long-lasting value and convenience. Features & Benefits • Bonded with fibreglass and resin to provide safety and optimum cutting performance • Extra thing disc thickness: 1mm for fast, precise cutting with minimal …
 |
These Makita Tungsten Carbide Grit Blades for X-LOCK grinders are suitable for cutting a variety of materials including plaster board, PVC, FRP & copper. Supports the X-LOCK system which allows for sa more→fe and easy disc installation and removal. Specifications • Diameter: 125 mm • Fitting: X-LOCK • Thickness: 2mm • Pack Quantity: 1 • TC Grit: 30/40 Features & Benefits • Suitable for cutting a variety of materials including plaster board, PVC, FRP & copper • Supports the X-LOCK system which allows for safe and easy disc installation and removal
Wire & Cup Brushes324
 |
Price from £2.10 up to £2.81
Compare prices6→Compare prices and buy Draper Flat Top Decarbonizing Wire Brush, 13mm
Brassed crimped steel wire brush with flat trim. 6mm diameter shanks. Brush length 25mm. Display packed.
 |
Price from £12.95
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush Pointed End 23mm 6mm Shank LES453162
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann Pointed End Brush With Shank has the following specification: Wire Type: SteelDiameter: 23mmWire Height: 25mmWire Gauge: 0.30Max Speed: 18,000/rpmAddit
 |
Price from £11.95 up to £14.31
Compare prices5→Compare prices and buy Sealey Wire Brush Set 5pc Brassed
• Suitable for use with power tools up to the maximum rated speed (4500rpm).• Shaft: ø6mm.• Contents: Brushes; Wire Cup; ø50mm, 75mm, Flat Wire; ø50mm, 75mm, ø25mm Decarbonising/C
 |
Price from £6.49
Compare prices4→Compare prices and buy Bosch 0.2mm Crimped Inox Steel Wire Pencil Brush 15mm 6mm Shank 2608622126
Fine Finish on Stainless Steel - The End Brush provides a good fine surface finish. It is fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces. Due to its shape, more→the end brush is ideal for cleaning work in very hard-to-reach areas on stainless steel, aluminium and non-ferrous metal surfaces as well as in corners and the inside of pipes and profiles. It is also suitable for removing rust, roughing, matt sanding and paint stripping. It is intended for use with drills with a 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while …
 |
Price from £26.99 up to £37.46
Compare prices4→Compare prices and buy Sealey Cleaning Brush Set Injector Bore 14pc
• Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting.• Set includes 3-Piece Brass Brushes 18/20/25mm.• 2-Piece End Brushes 15/19mm.• 1-Piece more→Steel Rod.• 1-Piece Rod.• 6-piece blanking plugs.Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting. Set includes 3-piece brass brushes 18/20/25mm, 2-piece end brushes 15/19mm, 1-piece Steel rod, 1-piece rod and 6-piece blanking plugs.Technical Specification:B
 |
Price from £12.52 up to £16.95
Compare prices5→Compare prices and buy Bosch 0.35mm Knotted Steel Wire Cup Brush 75mm M14 Thread 2608622099
Extra-Coarse Finish - The Heavy for Metal Wire Cup Brush provides an extra-coarse surface finish. This cup brush is fitted with knotted wire for heavy-duty cleaning applications. Ideal for use in meta more→l, it is suitable for cleaning work on medium to large steel surfaces, such as removing heavy rust, underseal, paint or varnish. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. Fits GGS 6 and GGS 8 straight grinders with M14 thread. Features and Benefits …
 |
Price from £7.49 up to £11.99
Compare prices5→Compare prices and buy Faithfull Conical Wire Brush 100Mm X M14X2 0,5Mm FAIWBTC100
Conical Knot Brush with high tensile steel wire. Ideal for work in hard-to-reach places such as edges or corners. Suitable for the removal of slag, rust, scale or even dried cement. Max. Cutting Speed more→: 12,500 rpm. Features: For use on s/less steel & heavier duty applications For use with angle grinders For use with angle grinders Maximum speed: 12,500 rpm Specifications: Dimensions: H:13.0 x W:4.0 x D:10.5 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBTC100
 |
Price from £4.49 up to £4.99
Compare prices4→Compare prices and buy Faithfull Wire Cup Brush 60mm M14x2, 0.30mm Steel Wire FAIWBC60
Faithfull Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for indust more→rial use and more specialist applications.
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
