Makita GA7020R
Cutting Discs74
 |
The CorePlus Hard Tile Turbo Diamond Blade has an ultra-thin, continuous PleXXus Turbo rim segment for precision chip-free porcelain tile cutting. A precision-engin
 |
DeWalt Extreme Diamond metal cutting discs are intended as a direct replacement for bonded abrasive cutting discs. They are suitable for use on steel, stainless steel, cast iron, rebar, sheet metal, a more→luminium and non-ferrous metals. Specifications • Diameter: 180 mm • Thickness: 1.5 mm • Bore Size: 22.23 mm Features and Benefits • Economical: 1000+ cuts can be achieved with one disc • Increased safety: solid steel body greatly reduces risk of disc breakage • No shelf life: does not deteroriate over time (in proper storage conditions) • Diameter retention: each disc maintains its original diameter until the last cut • Less dust: substantial reduction in …
 |
Dronco Perfect Line - The best-seller. Not only brilliant with its price/performan
 |
Lenox MetalMax is a new alternative to abrasive cut-off discs. Its breakthrough diamond technology delivers extreme durability to help you maximise work efficiencies and reduce costs in your metal cut more→ting jobs. MetalMax blades are recommended for multiple types of metal including steel, sheet metal, stainless steel, rebar, cast iron, aluminium and non-ferrous metals. Designed for use in the same power tools as bonded abrasive discs, at the same RPMs and feed forces, MetalMax blades can be used without having to change any operating settings. Specifications • Diameter: 180mm • Thickness: 1.5mm • Arbor: 22.23mm
 |
The Makita A24 depressed centre grinding disc is perfect for grinding steel and dressing welds. Specifications • Diameter: 180mm • Bore: 22.23mm • Thickness: 6mm • Pack Quantity: 1
 |
Reliable Cuts in Tiles - The Standard for Ceramic Diamond Cutting Disc provides reliable cuts in tiles. Its continuous cutting rim achieves accurate results in all sorts of tiles. Additionally, the di more→sc's high-quality standards are ensured by the Bosch diamond competence centre in Switzerland. Use this disc for cutting ceramics, porcelain and fine stoneware. With 25.4 mm bore, fits 20 mm bores with reduction rings. Features and Benefits • Reliable Cuts in Tiles • Standard for Ceramic Diamond Cutting Disc provides reliable cuts in tiles • Continuous cutting rim achieves accurate results in all types of tiles Specifications Diameter: 180mm Bore diameter: 25.40mm Bore size: 25.…
 |
Up to 30x longer lifespan - The Diamond Metal Wheel has up to 30x longer lifespan when cutting metal. Its steel body with diamond cutting edge is extremely robust and the disc maintains the same cutti more→ng depth and constant speed throughout its long lifespan. Thanks to Bosch's Diamond Technology the disc does not shatter if dropped and produces no chemical smell or extra dust during cutting. It is intended for cutting metals including steel, cast iron, stainless steel and copper. Bosch Diamond Metal Wheels comply with the highest safety requirements, such as EN 13236 It is designed for use with large angle grinders. It features increased safety and healthy cutting. With 22.23 mm bore for standard …
 |
A flat metal cutting disc which is ideal for working on steel. Part of a range of Makita reinforced abrasive cutting and grinding discs which are suitable for use with grinders and disc cutters. Speci more→fications • Model No: D-18683 • Diameter: 180mm • Thickness: 2.5mm • Bore: 22.23mm • Quantity: 1 Note generic image is shown for illustration purposes. Please refer to the description for the specifications of the item you will be purchasing Features and Benefits • Flat centre cutting disc • Ideal for cutting steel
Wire & Cup Brushes281
 |
Price from £2.05 up to £2.81
Compare prices7→Compare prices and buy Draper Flat Top Decarbonizing Wire Brush, 13mm
Brassed crimped steel wire brush with flat trim. 6mm diameter shanks. Brush length 25mm. Display packed.
 |
Price from £2.95
Compare prices3→Compare prices and buy Faithfull Crimped Wire Cup Brush 50mm 6mm Shank WBS50
This Faithfull crimped steel Wire Cup Brush is designed for light to medium-duty applications, such as cleaning metal surfaces prior to welding or painting. The wire brush is fitted with a 6mm (1/4in) more→shank and is designed to operate with power tools with a maximum speed of 4,500/min. Type: Cup.The FAIWBS50 Wire Cup Brush has the following specifications: Face Diameter: 50 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel wire. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £6.95 up to £7.56
Compare prices5→Compare prices and buy Sealey Twist Knot Wire Flat Brush Ø75mm with Ø6mm Shaft
• Twist knot flat wire wheel.• Stainless steel.• Shaft: ø6mm. • Width: ø75mm.• Max Speed: 12000rpm.Twist knot flat wire wheel, ø75mm width and a ø6mm shaft.• Twist knot flat wire w more→heel. • Stainless Steel. • Shaft: ø6mm. • Width: ø75mm. • Max Speed: 12000rpm. • Model No. TKFBS75Technica
 |
Price from £27.95
Compare prices3→Compare prices and buy Lessmann X Lock Non Sparking Knotted Wire Wheel 115mm X-Lock 472.25X
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting, they can be used for polishing, light deburring work, and removing rust, paint, dir more→t, and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses, car workshops, and by staircase, railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Steel Knot Bevel Brush 115mm Non Spark
 |
Price from £17.60 up to £25.95
Compare prices6→Compare prices and buy Bosch 0.8mm Knotted Steel Wire Cup Brush 90mm M14 Thread 1608614000
Extra-Coarse Finish - The Heavy for Metal Wire Cup Brush provides an extra-coarse surface finish. This cup brush is fitted with knotted wire for heavy-duty cleaning applications. Ideal for use in meta more→l, it is suitable for cleaning work on medium to large steel surfaces, such as removing heavy rust, underseal, paint or varnish. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. Fits GGS 6 and GGS 8 straight grinders with M14 thread. Features and Benefits …
 |
Price from £5.71 up to £5.99
Compare prices7→Compare prices and buy Bosch 1609200269 Pencil Brush for Drills and Straight Grinders
As a leading manufacturer for power tools accessories, Bosch offers the ideal accessories for virtually all applications
It is our aim to develop appropriate accessories for more efficient work more→ing
The research and development departments at Bosch work to develop and optimize accessories in line with the needs of users
It is our aim to develop appropriate accessories for more efficient work more→ing
The research and development departments at Bosch work to develop and optimize accessories in line with the needs of users
 |
Price from £7.95 up to £11.99
Compare prices3→Compare prices and buy Faithfull Twisted Knot Wire Cup Brush 65mm M10 x 1.25 Thread WBT65MF
Faithfull Twist Knot Wire Cup Brush for heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Designed for use with a compatible thread angle grinder. Suitable for more→industrial use and more specialist applications.Fa
 |
Price from £11.95 up to £13.99
Compare prices3→Compare prices and buy Faithfull Twist Knot 0.5mm Stainless Steel Wire Cup Brush 65mm M14 Thread
This Faithfull Wire Cup Brush has been designed for use with angle grinders that have a compatible thread. Suitable for industrial use and more specialist applications. Twist knot wire brushes are sui more→ted to heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Perfect for use on stainless steel. When standard wire brushes are used on stainless steel they can contaminate the material and cause rust. Conforms to ISO 9001, DIN EN 1083-1 and 2. Specification: Diameter: 65mmThread: M14 x 2Wire: Twist Knot Stainless Steel Grade 304, 0.50mmAdditiona
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
