Maktec MT963
Cutting Discs246
 |
These Makita Type 41 Pro Cutting discs are designed for fast clean cutting and are particularly suitable for use with cordless angle grinders for around 40% longer battery life over a standard cutting more→wheel. They are manufactured from high quality bonded 60G aluminium oxide for long life and are suitable for cutting steel and stainless steel. Please note generic stock image shown for illustration purposes only. Refer to the description for the specifications. Specifications • Diameter: 125mm • Thickness: 1.2mm • Bore: 22.23mm Contents • 10 Discs
 |
DeWalt Extreme Diamond metal cutting discs are intended as a direct replacement for bonded abrasive cutting discs. They are suitable for use on steel, stainless steel, cast iron, rebar, sheet metal, a more→luminium and non-ferrous metals. Specifications • Diameter: 125 mm • Thickness: 1.3 mm • Bore Size: 22.23 mm Features and Benefits • Economical: 1000+ cuts can be achieved with one disc • Increased safety: solid steel body greatly reduces risk of disc breakage • No shelf life: does not deteroriate over time (in proper storage conditions) • Diameter retention: each disc maintains its original diameter until the last cut • Less dust: substantial reduction in …
 |
Reliable Performance - The Standard for Inox Rapido Cutting Disc enables reliable performance in Inox. Its thin disc edge supports smooth and easy cutting. In addition, the disc is free from ferrous, more→sulphurous and chlorinated fillers. Use this disc for cutting Inox. It is compatible with angle grinders. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Performance in Inox • Standard for Inox Rapido Cutting Disc performs reliably in Inox • The thin disc edge supports smooth and easy cutting Specifications Specification: WA 60 T BF Diameter: 125mm Bore …
 |
These Makita Tungsten Carbide Grit Blades for X-LOCK grinders are suitable for cutting a variety of materials including plaster board, PVC, FRP & copper. Supports the X-LOCK system which allows for sa more→fe and easy disc installation and removal. Specifications • Diameter: 125 mm • Fitting: X-LOCK • Thickness: 2mm • Pack Quantity: 1 • TC Grit: 30/40 Features & Benefits • Suitable for cutting a variety of materials including plaster board, PVC, FRP & copper • Supports the X-LOCK system which allows for safe and easy disc installation and removal
 |
Lasts up to 4x longer than a standard multi material diamond disc - On modern construction sites you need to cut a wide variety of hard materials, and these take their toll on tools. The EXPERT MultiM more→aterial Disc is the ideal accessory for busy construction professionals needing to cut concrete, brick, roofing tiles and reinforced concrete - because it simply keeps doing the job for longer. The high segments on this cutting disc are made from an advanced matrix of metal and diamonds, which is designed to stay razor sharp. These segments are laser-welded onto a hard steel body; and the sides are fluted to remove dust for efficiency and longevity. This mix of optimum diamond grits and advanced …
 |
The Marcrist Mi350 Universal Diamond Blade is a versatile cutting tool engineered for high-performanc
 |
Cuts materials that angle grinders previously couldn’t - Professionals value angle grinders for their ability to cut tough materials like concrete, stone and metal. With the EXPERT Carbide Multi Wheel more→this wonderful tool can be even more versatile, efficiently cutting all kinds of softer materials such as wood, plastic and modern composites. The EXPERT Carbide Multi Wheel uses sharp carbide grits on its rim to cut multiple materials extremely effectively. The grits are joined to a steel body by a laser technique for an extra strong bond, giving a safe and reliable cutting disc that maintains a constant speed and depth throughout a long lifespan. With the EXPERT Carbide Multi Wheel, your angle gr…
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
Wire & Cup Brushes324
 |
Price from £24.95 up to £25.99
Compare prices4→Compare prices and buy Lessmann 0.5 Steel Wire Knot Wheel Brush 115mm 22.2mm Bore LES472211
The Lessmann Knot Wheel Brushes are for grinders, angle grinders and stationary machines, used in the preparation and re-working of bolt fillet and butt welds. They remove scale, rust, paint, slag, ru more→bber residue and can be used for de-burring. They are filled with a special high tensile strength steel wire in order to meet the exacting requirements during use.This Lessmann Knot Wheel Brush has the following specification: Diameter: 115mm.Width: 14mm.Bore: 22.2mm.Wire Gauge: 0.50.Wire Type: Steel.Max RPM: 12,500/min.Addi
 |
Price from £2.95
Compare prices3→Compare prices and buy Faithfull Point End Crimped Wire Brush 12mm 6mm Shank WBSI12P
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12P Wire End Brush has the following specifications: Type: Pointed end. Face diameter: 12/60 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £3.89 up to £5.53
Compare prices6→Compare prices and buy Draper Rotary Wire Brush, 6 x 100m
Brassed crimped steel wire with 6mm diameter shank. Display packed.
 |
Price from £5.69 up to £7.28
Compare prices6→Compare prices and buy Draper Crimped Wire Cup Brush, 60mm, M14
Manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. M14 thread. Display packed.
 |
Price from £4.49 up to £4.99
Compare prices4→Compare prices and buy Faithfull Crimped Wire Cup Brush 60mm M14 Thread WBC60
Faithfull Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for indust more→rial use and more specialist applications.Th
 |
Price from £7.23 up to £9.11
Compare prices7→Compare prices and buy Draper Crimped Wire Cup Brush, 80mm, M14
Manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. M14 thread. Display packed.
 |
Price from £57.95 up to £59.99
Compare prices4→Compare prices and buy Lessmann Pipeline Stainless Steel Wire Wheel Brush 178mm 22.2mm Bore 475.8
Lessmann Pipeline Brushes are specially developed for professional use on U and V-welds in the pipeline industry. These high-quality Lessmann brushes have a long lifetime and are quiet when running. T more→hey are especially narrow and therefore they are the perfect tool for cleaning all welds at tube connections.Thi
 |
Price from £8.95 up to £14.99
Compare prices4→Compare prices and buy Faithfull Wire Brush Shaft Mtd 70 X 25Mm 0,30Mm FAIWBSI70
Industrial Wire Cup Brush for cleaning paint or deburring of moulds or castings in hard-to-reach areas such as cylinders. Can be used in industrial power tools at higher speeds. Max. Cutting Speed: 12 more→,500 rpm.Shaft: 6mm (1/4in). Features: 6mm shank For cleaning paint or deburring moulds or castings For cleaning paint or deburring moulds or castings Suitable for hard-to-reach areas Can be used in industrial power tools at higher speeds Specifications: Dimensions: H:12.5 x W:5.0 x D:8.0 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBSI70
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
