MAM GT.1 8,5x20/5x112 ET30 DIA66,6

Add some finishing style or contrast to your wheels with the Tuner Wheel Nuts from TPI. Designed to fit a range of thread sizes depending on your selection, you can be sure to find the tuner nut for y more→ou.Perfect finishing touchSecure locking nuts16 nuts and 4 locking nutsA set of 16 Tuner wheel Nuts and 4 Lockers including locking key all finished in matching colours. A choice of two thread pitches are available, please select your requirements from the drop down above. These nuts are specifically designed to fit wheels with small diameter bolts pockets that won't fit a standard nut and socket. Supplied with a long reach removal/fastening key.Seat Type: Tapered Length: 33mm Style: Closed end

Grayston Wheel Bolts are available in a large range of thread and fitting options to suit most vehicle and wheel fitments. These bolts are ideal for when fitting non standard wheels to a vehicle where more→a longer length bolt or one with a different seat is required.Ideal for fitting non original wheels to a vehicleWide range of thread length and seat typesZinc plated steel for corrosion resistanceOptions explainedLoose 60 Degree and Loose Radius seat options refer to the bolt having a separate seating washer.Variable 60 Degree bolts allow for variation in wheel PCD's (Eg 108/110mm or 98/100mm). This allows wheels with a slightly different PCD to be fitted to the car.Length is measurement of

These wheel nuts from Grayston are specifically designed to fit classic Wolfrace slot mag wheels which require a sleeve fitting with a tapered washer.Available in different thread options:Option 1: 1/ more→2" UNF thread with 11/16" (17.4mm) OD sleeveOption 2: M12 x 1.5 thread with 41/64" (16.3mm) OD sleeveOption 3: 7/16" UNF thread with 11/16" (17.4mm) OD sleeveOption 4: 3/8" UNF thread with 41/64" (16.3mm) OD sleeveOption 5: M12 x 1.25 thread with 41/64" (16.3mm) OD sleeveOption 6: M12 x 1.5 thread with 11/16" (17.4mm) OD sleeveOption 7: 7/16" UNF thread with 41/64" (16.3mm) OD sleeveOption 8: M14 x 1.5 thread with 11/116" (17.4mm) OD Sleeve