Milwaukee AG 10-115 EK (4933451219)
Cutting Discs326
 |
You can expect reliable performance, fast accessory changes and neat cuts with these Bosch cutting discsX-LOCK cutting discs also fit standard angle grindersThe Bosch 2608619266 cutting discs deliver more→reliable performance in Inox. These revolutionary quick change discs make accessories changes fast and convenient thanks to the keyless X-LOCK system. They are extremely durable and long lasting.Feature
- Reliable performance in Inox
- Thin disc edge supports smooth and easy cutting
- The disc is free from ferrous, sulphurous and chlorinated fillers
- Bosch cutting discs comply with the maximum safety requirements, such as EN 12413
- Changing cutting discs is fast and convenient thanks to
- Reliable performance in Inox
- Thin disc edge supports smooth and easy cutting
- The disc is free from ferrous, sulphurous and chlorinated fillers
- Bosch cutting discs comply with the maximum safety requirements, such as EN 12413
- Changing cutting discs is fast and convenient thanks to
 |
The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into more→place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock diamond cutting discs are suitable for cutting concrete, granite and marble. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in seconds …
 |
Reliable Cuts - The Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building materials. Its optimised diamond matrix delivers solid results thanks to the disc's high-qu more→ality standards. Bosch's diamond competence centre in Switzerland ensures these standards by enabling consistent quality time and again. Use this disc for cutting building materials such as concrete and masonry. It is compatible with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Cuts in Universal Building Materials • Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building materials • Optimised …
 |
Impressive Removal Rate - The X551 Expert for Metal has an impressive material removal rate on metal surfaces. The zirconia alumina and semi-friable aluminium oxide abrasive grit blend delivers a bril more→liant removal rate and lifetime on metal applications. Furthermore, its highly robust X-cloth with stable backing ensures durability and steady performances on tough surfaces. The grit is bonded using fully synthetic resin on X-cloth for optimal sanding behaviour. It is intended for deburring and welding preparation on carbon steel, mild steel, aluminium, non-ferrous metals and cast iron. It is also ideal for removing discolouration, stock and surface imperfections. The X551 Expert for Metal is …
 |
The DEWALT DT43921 Metal Cut Off Disc is manufactured from professional aluminium oxide grain, designed for cordless tools to maximise life and performance. Ideal for use in general cutting work on st more→ainless steel, ferrous metals and non-ferrous metals. With an extra thin kerf (1.2mm) for the perfect cut. Pack of 10 discs supplied in a storage tin. Specification: Diameter: 115mmThickness: 1.2mmBore Size: 22.23mm
 |
• Suitable for cutting various building materials such as granite, masonry, concrete and hard bricks.• Can be used for wet or dry-cutting.• 15mm Diamond segments allow for longer use per disc.Suitable more→for cutting various building materials such as granite, masonry, concrete and hard bricks. Can be used for wet or dry-cutting. 15mm Diamond segments allow for longer use per disc.• Suitable for cutting various building materials such as granite, masonry, concrete and hard bricks. • Can be used for wet or dry-cutting. • 15mm Diamond segments allow for longer use per disc. • Model No. WDMP115Technica
 |
Excellent Lifetime - The X571 Best for Metal has an excellent lifetime when grinding welding seams and coarse sanding metal surfaces. Its high-quality zirconia alumina/semi-fr
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
Wire & Cup Brushes302
 |
Price from £3.89 up to £5.53
Compare prices6→Compare prices and buy Draper Rotary Wire Brush, 6 x 100m
Brassed crimped steel wire with 6mm diameter shank. Display packed.
 |
Price from £11.49 up to £15.95
Compare prices5→Compare prices and buy Bosch Conical 0.35mm Inox Crimped Wire Wheel 100mm M14 Thread 2608622108
Extra-Fine Finish - The Clean for Inox Bevel Brush provides an extra-fine surface finish. Its conical bevel brush is fitted with crimped wire for light- to medium-duty cleaning applications in hard to more→reach areas, making it ideal for the cleaning of smaller areas at high circumferential speeds. The brush can be used on stainless steel, aluminium or non-ferrous metal surfaces and on edges or in grooves. It is also suitable for removing rust, roughing, matt sanding, paint stripping and removing annealing colour on welded seams. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are …
 |
Price from £29.99 up to £32.95
Compare prices4→Compare prices and buy Lessmann Conical Knot Brush 115mm M14 Bore, 0.35 Steel Wire
The Lessmann Conical Knot Brushes with left hand twisted knots to increase stability. The special shape of the conical brushes enables the user to work in hard to reach places. They have been designed more→for heavy-duty use, for the preparing of metal surfaces before painting, and the removal of slag, rust, scale, or concrete waste.
 |
Price from £11.95 up to £13.46
Compare prices5→Compare prices and buy Sealey Brassed Steel Cup Brush Ø125mm M14 x 2mm
• Suitable for use with power tools up to the maximum rated rpm.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power tools up to the maximum rated rpm. C more→rimped brassed steel filaments add extra rigidity and cleaning power.• Suitable for use with power tools up to the maximum rated rpm. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. CBC125Technical Specification:D
 |
Price from £4.49
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Brush 50mm 6mm Shank 2608622006
Fine Finish on Steel - The Wire Cup Brush delivers an excellent, fine-surface finish. It features crimped wire for light-to-medium
 |
Price from £15.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Knot Cup Brush 65mm M14 x 2.0 Thread LES482217
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special s more→teel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Diameter. 65mm.Bore. M14.Wire Gauge. 0.50. Wire Type. Steel.Max. R.P.M. 12,500.Addition
 |
Price from £17.71 up to £22.24
Compare prices6→Compare prices and buy Draper Crimped Wire Cup Brush, 60mm, M10
Expert Quality, industrial quality manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. Carton packed.
 |
Price from £18.95 up to £25.13
Compare prices6→Compare prices and buy Draper Expert Crimped Wire Cup Brush, 100mm, M14
Expert Quality, industrial quality manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. Carton packed.
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
