Milwaukee AG 9-125 XC (4933403200)
Cutting Discs221
 |
Makita's Diamak Diamond Cutting Discs with segmented rim. The segmented blade is designed to cut most masonry materials including Masonry, brick, block, light concrete, sandstone, limestone and slate. more→Specifications • Diameter: 125mm • Bore: 22.23mm • Ring: 20mm • Pack Quantity: 1
 |
The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight more→disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasi
 |
Rough Grit Sanding (P50 and Rougher) - The X-LOCK Backing Pad Hard is ideal for rough grit sanding (P50 and rougher). It features an extra-rigid multi-groove construction that maximises contact pressu more→re between disc and workpiece, enabling heavy-duty, highly aggressive sanding applications. For convenient work, the pad´s angled surface provides an ergonomic grinding position. Manufactured from fibreglass reinforced thermostable plastic, it resists even highest temperatures and breakage. It is suitable for use with X-LOCK angle grinders. X-Lock clip is included. Changing backing pads is fast and convenient thanks to the keyless X-LOCK system. Click it on with X-LOCK – the fastest accessory-chang
 |
Suitable for use with angle grinders, these flap discs have strips of abrasive material and can be used for grinding, shaping or rough sanding on a range of materials. Features and Benefits • Des more→igned for standard 125mm angle grinders • Suitable for a range of materials, including wood, metal, masonry and PVC • Long life Specifications • Stanley Part No: STA32126 • Disc Diameter: 125mm • Grit: 60 Grit
 |
Designed for cutting metal with angle grinders, these Stanley cutting discs have a depressed centre so the cutting edge is offset from the nut - this allows for better access in tight spaces. Features more→and Benefits • Compatible with standard angle grinders • Depressed centre: prevents the nut from causing an obstruction and allows access in tight spaces Specifications • Disc Diameter: 125mm • Bore: 22mm • Thickness: 3mm • Pack Quantity: 1
 |
The Faithfull Zirconia Abrasive Jumbo Flap Discs are designed for use on angle grinders. Jumbo discs contain up to 40% more abrasive than standard flap discs. Manufactured from long lasting Zirconia A more→lumina and resin bonded for extra strength. Suitable for use on wood, metal, plastic and stainless steel. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces.1 x Faithfull Zirconia Abrasive Jumbo Flap Disc ZA120 125mm. 120 grit is suitable for smooth grinding. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces. For use with a 125mm angle grinder. Max. Speed: 80m/s 12,200 RPM.Additional Information:&bu
 |
81.99Buy!
£
£
BricoINN
Delivery: in United Kingdom
Report
If you like to take care of every detail in your home and own the latest products that will make your life easier, purchase Angle grinder Ferrestock Brushless FSKAML001 at the best price.. Product wit more→h plug: Yes. Type of plug: Plug EU. Type: Grinder. Colour: Black/Green
 |
The Marcrist VC750 Rip Cut Diamond Blade is engineered for superior performance in cutting a variety of materials. this diamond blade excels in rip cutting through pallets, roofing felt, tree roots an more→d wood with exceptional speed and precision. Featuring a high-quality diamond matrix, the VC750 offers enhanced durability and long-lasting cutting power, ensuring reliable results on tough materials. Its advanced design minimises wear and tear, extending the blade’s lifespan and maintaining consistent performance throughout its use. Features & Benefits • Ideal for roofers and landscapers • Silent centre provides a quieter more stable cut • Ultra stable and reliable • Carbide cl…
Wire & Cup Brushes321
 |
Price from £4.95
Compare prices3→Compare prices and buy BlueSpot Bevelled Crimped Steel Wire Cup Brush 115mm M14 Thread 19220
The BlueSpot Tools Steel Bevel Wire Cup Brush is manufactured from hardened steel wire for increased durability. Ideal for preparing metal surfaces for welding and painting. Specifications: Wire: 0.3m more→m.Diameter: 115mm (4 1/2in) / M14 x 2 Fitting.Maximum safe speed: 12,500 RPM.Additional Information:&bu
 |
Price from £5.95
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Inox Steel Wire Brush 50mm 6mm Shank 2608622117
Fine Finish on Stainless Steel - The Wire Cup Brush provides a good fine surface finish. It is fitted with crimped wire for light-to-medium
 |
Price from £14.95
Compare prices4→Compare prices and buy Bosch 0.5mm Knotted Conical Steel Wire Wheel Brush 100mm M14 Thread 260862
Coarse Finish on Metal - The Heavy for Metal Bevel Brush delivers an extra-coarse surface finish. Its conical bevel brush is fitted with knotted wire for heavy-duty cleaning applications in hard-to-re more→ach areas. It is suitable for cleaning smaller steel surfaces and in grooves or on edges at high circumferential speeds. Ideal for use in metal, this brush is also suitable for removing heavy rust, paint stripping, deslagging, deburring, descaling and cleaning welding seams. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface …
 |
Price from £10.29 up to £11.78
Compare prices6→Compare prices and buy Sealey Brassed Steel Cup Brush Ø100mm M14 x 2mm
• Suitable for use with power tools up to the maximum rated rpm.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power tools up to the maximum rated rpm. C more→rimped brassed steel filaments add extra rigidity and cleaning power.• Suitable for use with power tools up to the maximum rated rpm. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. CBC100Technical Specification:D
 |
Price from £7.95 up to £11.99
Compare prices5→Compare prices and buy Faithfull Wire Cup Brush T/Knot 65X M10X1,5 0,5Mm FAIWBT65MC
Twist Knot Wire Cup Brush for heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Designed for use with a compatible thread angle grinder. Suitable for industria more→l use and more specialist applications. Features: For heavier duty applications For use with angle grinders For use with angle grinders Specifications: Dimensions: H:11.0 x W:6.0 x D:9.0 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBT65MC
 |
Price from £3.73 up to £5.16
Compare prices6→Compare prices and buy Draper Hollow Cup Wire Brush, 75mm
Brassed crimped steel wire with 6mm diameter shank. Display packed.
 |
Price from £8.95
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush 23mm 6mm Shank LES453161
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 23mm.Wire Height: 25mm.Wire Gauge: 0.30.Max Speed: 20,000/rpm.Addi
 |
Price from £20.99 up to £28.95
Compare prices6→Compare prices and buy Bosch 0.5mm Knotted Steel Wire Cup Brush 90mm M14 Thread 1608614001
Extra-Coarse Finish - The Heavy for Metal Wire Cup Brush provides an extra-coarse surface finish. This cup brush is fitted with knotted wire for heavy-duty cleaning applications. Ideal for use in meta more→l, it is suitable for cleaning work on medium to large steel surfaces, such as removing heavy rust, underseal, paint or varnish. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. Fits GGS 6 and GGS 8 straight grinders with M14 thread. Features and Benefits …
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
