Milwaukee AGV 15-125 XC (4933428120)
Cutting Discs247
 |
Designed for cutting concrete and stone with angle grinders, these Stanley cutting discs have a depressed centre so the cutting edge is offset from the nut - this allows for better access in tight spa more→ces. Features & Benefits • Compatible with standard angle grinders • Depressed centre: prevents the nut from causing an obstruction and allows access in tight spaces Specifications • Disc Diameter: 125mm • Bore: 22mm • Thickness: 3mm • Pack Quantity: 1
 |
Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs more→must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjus
 |
Zirconium flap disc for descaling, rust removal, weld preparation, weld cleaning and general surface preparation. More durable than aluminium oxide flap discs. Abrasive flaps are attached to rigid dis more→c with epoxy adhesive - does not require backing pad. Depressed centre disc suitable for electric and air tools. Features & Benefits: • Zirconium flap disc for descaling, rust removal, weld preparation, weld cleaning and general surface preparation. • More durable than aluminium oxide flap discs. • Abrasive flaps attached to rigid disc with epoxy adhesive - does not require backing pad. • Depressed centre disc suitable for electric and air tools. • Size/Bore: Ø125/22mm. • Model No. FD12560 Spe…
 |
The Faithfull Zirconia Abrasive Jumbo Flap Discs are designed for use on angle grinders. Jumbo discs contain up to 40% more abrasive than standard flap discs. Manufactured from long lasting Zirconia A more→lumina and resin bonded for extra strength. Suitable for use on wood, metal, plastic and stainless steel. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces.1 x Faithfull Zirconia Abrasive Jumbo Flap Disc ZA80 125mm. 80 grit is suitable for final grinding. The slightly conical shape is ideal for grinding at 15–25 degree angles on contoured surfaces. For use with a 125mm angle grinder. Max. Speed: 80m/s 12,200 RPM.Additional Information:&bu
 |
Fast cutting discs ideal for improved runtime when used with cordless angle grinders. Specifications • Diameter: 125mm • Pack Quantity: 1
 |
The X-LOCK Expert for Inox Cutting Disc delivers powerful cutting performance in Inox with maximum safety. The disc is made of premium super-hard aluminium oxide with functional fillers and additives more→to reduce heat generated while cutting. This produces good quality surface results and ensures a long disc-performanc
 |
Suitable for use with angle grinders, these flap discs have strips of abrasive material and can be used for grinding, shaping or rough sanding on a range of materials. Features & Benefits • Desig more→ned for standard 125mm angle grinders • Suitable for a range of materials, including wood, metal, masonry and PVC • Long life Specifications • Stanley Part No: STA32126 • Disc Diameter: 125mm • Grit: 60 Grit
 |
The Best for Universal Turbo Diamond Cutting Disc provides fast cuts in universal building materials. Its optimised diamond matrix provides the fastest cuts through a variety of materials. The disc's more→matrix shape has been developed for universal cuts with a near-perfect finish for all visible cutting edges. Additionally, this product cuts quickly while producing very little vibration. Use this disc for cutting building materials such as concrete and masonry. • Fast Cuts in Universal Building Materials • Best for Universal Turbo Diamond Cutting Disc provides fast cuts in universal building materials • Optimised diamond matrix provides the fastest cuts • Matrix shape developed …
Wire & Cup Brushes212
 |
Price from £9.95
Compare prices3→Compare prices and buy Lessmann 0.25 Brass Wire DIY Cup Brush 50mm 6mm Shank LES43012607
The Lessmann DIY Cup Brush is fitted with 6mm shank. It has been designed for working on large surfaces, generally for the removal of rust, paint, dirt or scale, and for polishing. 430.123.07: Wire: 0 more→.35 Steel, Diameter: 50mm.430.133.07
 |
Price from £3.49
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Ø75mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB75Technical Specification:D
 |
Price from £6.49
Compare prices4→Compare prices and buy Bosch 0.2mm Crimped Inox Steel Wire Pencil Brush 15mm 6mm Shank 2608622126
The Pencil Brush provides a good fine surface finish. It is fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces. Due to its shape, the pencil brush is ideal for more→cleaning work in very hard-to-reach areas on stainless steel, aluminium and non-ferrous metal surfaces as well as in corners and the inside of pipes and profiles. It is also suitable for removing rust, roughing, matt sanding and paint stripping. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use …
 |
Price from £3.89 up to £5.95
Compare prices5→Compare prices and buy Bosch 0.2mm Crimped Steel Wire Wheel Brush 75mm 6mm Shank 1608622015
The Wire Wheel provides a good fine surface finish. Fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces, it is ideal for removing annealing colour on welded seam more→s. The wire wheel is suitable for cleaning work at high circumferential speeds on smaller steel surfaces, edges or in grooves. Moreover, it is suitable for removing rust, roughing, mat sanding and paint stripping. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use with drills with 6-mm shank.Wire …
 |
Price from £3.49
Compare prices3→Compare prices and buy Faithfull Crimped Wire Wheel Brush 75mm 6mm Shank WBS75C
This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and des more→igned to operate with power tools up to a maximum of 4,500/min. Shaft: 6mm (1/4in). Wire: 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.Diame
 |
Price from £13.99 up to £26.95
Compare prices6→Compare prices and buy Bosch Professional X-lock Heavy Metal 75x0.5x125 M Brush Cup Silver 260862
X-Lock Heavy For Metal Cup Brush, Knotted Wire Provides An Aggressive Cleaning Performance It Is Suitable For Use With X-Lock Angle Grinders.Featur
 |
Price from £13.95
Compare prices3→Compare prices and buy Lessmann Crimped Wire Wheel Brush 70mm 6mm Shank 417163
The Lessmann Wheel Brushes are fitted with a 6mm shank. The tight filling wire and powerful running makes these brushes excellent tools. These encapsulated brushes have a long service life due to the more→bedding of wire in plastic, which also prevents end breakage. The brushes have a consistent working width.The Lessmann Knotted Wheel Brush With Shank has the following specification: Wire Type: SteelDiameter: 70mmWidth: 13mmShank: 6mmWire Gauge: 0.30Max Speed: 15,000/rpmAddit
 |
Price from £12.95
Compare prices5→Compare prices and buy Draper Brassed Steel Crimped Wire Brush Set (6 Piece)
• Set includes a 25mm wire end brush, 75mm wire cup brush, and three wire wheel brushes (50, 75, 100mm) • Designed for light to medium-duty work and delivers rapid stock removal from a wide variety of more→surfaces • Hardened dipped brassed steel wire • Strong construction with crimping action • Suitable for cleaning, deburring and surface preparation • Fitted with a non-slip 6.35mm hex shank • Compatible with most drill drivers and drills with a 13mm chuckThis set of wire brushes is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The brushes are made from hardened dipped brassed steel wire, which gives a high level of durability and resistance&hell
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
