Milwaukee AGV 17-125 XC (4933449850)
Cutting Discs214
 |
Excellent Lifetime - The X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications. Its high-quality zirconia alumina/semi-fr
 |
Excellent Lifetime - The X571 Best for Metal has an excellent lifetime when grinding welding seams and coarse sanding metal surfaces. Its high-quality zirconia alumina/semi-fr
 |
Designed for use with angle grinders, these Stanley grinding discs have a depressed centre so the edge of the disc is offset from the nut - this allows for better access in tight spaces. Features and more→Benefits • Compatible with standard angle grinders • Depressed centre: prevents the nut from causing an obstruction and allows access in tight spaces Specifications • Disc Diameter: 125mm • Bore: 22mm • Thickness: 6mm • Pack Quantity: 1
 |
DeWalt Extreme Diamond metal cutting discs are intended as a direct replacement for bonded abrasive cutting discs. They are suitable for use on steel, stainless steel, cast iron, rebar, sheet metal, a more→luminium and non-ferrous metals. Specifications • Diameter: 125 mm • Thickness: 1.3 mm • Bore Size: 22.23 mm Features and Benefits • Economical: 1000+ cuts can be achieved with one disc • Increased safety: solid steel body greatly reduces risk of disc breakage • No shelf life: does not deteroriate over time (in proper storage conditions) • Diameter retention: each disc maintains its original diameter until the last cut • Less dust: substantial reduction in …
 |
Excellent Lifetime - The X571 Best for Metal has an excellent lifetime when grinding welding seams and coarse sanding metal surfaces. Its high-quality zirconia alumina/semi-fr
 |
Flexovit Flap Discs are ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings. The angles of the flaps mean more abrasive makes contact with the workpiece than a more→conventional fibre disc which increases productivity. Suitable for use on Metal, wood and paint.Size: 125mm Bore: 22mmGrit: 40.Additional Information:&bu
 |
Lasts up to 4x longer than a standard multi material diamond disc - On modern construction sites you need to cut a wide variety of hard materials, and these take their toll on tools. The EXPERT MultiM more→aterial Disc is the ideal accessory for busy construction professionals needing to cut concrete, brick, roofing tiles and reinforced concrete - because it simply keeps doing the job for longer. The high segments on this cutting disc are made from an advanced matrix of metal and diamonds, which is designed to stay razor sharp. These segments are laser-welded onto a hard steel body; and the sides are fluted to remove dust for efficiency and longevity. This mix of optimum diamond grits and advanced …
 |
Featuring an ultra-slim profile of just 1mm, these discs offer exceptional precision, making them ideal for intricate and detailed metal cutting tasks. The 125mm diameter ensures versatility, enabling more→you to tackle a variety of projects with ease. Constructed from high-quality stainless steel, these discs ensure durability and resilience, making them suitable for demanding metal cutting applications. The set of 10 discs provides ample supply for multiple projects, offering long-lasting value and convenience. Features & Benefits • Bonded with fibreglass and resin to provide safety and optimum cutting performance • Extra thing disc thickness: 1mm for fast, precise cutting with minimal …
Wire & Cup Brushes306
 |
Price from £14.29 up to £16.95
Compare prices5→Compare prices and buy Lessmann 0.5 Steel Wire Knot Cup Brush 65mm M14 x 2.0 Thread LES482217
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special s more→teel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Diameter. 65mm.Bore. M14.Wire Gauge. 0.50. Wire Type. Steel.Max. R.P.M. 12,500.Addition
 |
Price from £5.21 up to £7.49
Compare prices6→Compare prices and buy Draper 3 Piece Crimped Wire Brush Set WBSET3
This set of wire brushes is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The brushes are made from hardened dipped brassed steel wire, which more→gives a high level of durability and resistance to oxidation. The brushes are strong enough to provide reliable performance, and the crimping is flexible to tackle recessed areas and irregular surfaces. The set includes a 25mm wire end brush, 50mm wire cup brush, and a 50mm wire wheel brush. Fitted with a non-slip 6.35mm hex shank. Compatible with most drill drivers and drills with a 13mm chuck. Conforms to EN1083-1 and EN1083-2 Features and Benefits • Set includes a 25mm wire end brush,…
 |
Price from £1.86 up to £2.49
Compare prices5→Compare prices and buy Faithfull Crimped Wire Wheel Brush 50mm 6mm Shank WBS50C
This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and des more→igned to operate with power tools up to a maximum of 4,500/min. Shaft: 6mm (1/4in). Wire: 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.Diame
 |
Price from £1.21 up to £1.49
Compare prices5→Compare prices and buy BlueSpot Flat Crimped Steel Wire Wheel Brush 50mm 6mm Shank 19221
The BlueSpot Tools Flat Wire Wheel Brush is ideal for preparing metal surfaces for welding and painting. Its 6mm (1/4in) shank fits most electric drills.This BlueSpot Tools Flat Steel Wire Wheel Brush more→has the following specifications: Shank: 6mm (1/4in).Wire: 0.3mm.Diameter: 50mm.Max. Safe Speed: 4,500 RPM.Additional Information:&bu
 |
Price from £4.95
Compare prices5→Compare prices and buy Stanley Crimped Steel Wire Wheel Brush 50mm 6mm Shank STA36020
These Stanley crimped wire wheels are ideal for cleaning and preparing surfaces. They are designed for use in drill chucks and can be used with standard corded or cordless drills. The high tensile ste more→el wire is heat treated for durability. An innovative internal holding plate construction helps to reduce wire movement for increased control and longer product lifetime. Features & Benefits • For use with electric drills • Suitable for corded and cordless machines • Ideal for cleaning and surface preparation Specifications • Wheel Diameter: 50mm • Wheel Thickness: 10mm • Shank Diameter: 6mm
 |
Price from £38.46 up to £41.95
Compare prices5→Compare prices and buy Lessmann Pipeline Wire Wheel Brush 125mm 22.2mm Bore 473.201.40
Lessmann Pipeline Brushes are specially developed for professional use on U and V-welds in the pipeline industry. These high-quality Lessmann brushes have a long lifetime and are quiet when running. T more→hey are especially narrow and therefore they are the perfect tool for cleaning all welds at tube connections.Thi
 |
Price from £4.95
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Brush 50mm 6mm Shank 2608622006
Fine Finish on Steel - The Wire Cup Brush delivers an excellent, fine-surface finish. It features crimped wire for light-to-medium
 |
Price from £23.90 up to £26.95
Compare prices5→Compare prices and buy Lessmann X Lock Non Sparking Knotted Wire Wheel 115mm X-Lock 472.21X
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting, they can be used for polishing, light deburring work, and removing rust, paint, dir more→t, and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses, car workshops, and by staircase, railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Steel Knot Wheel Brush 115mm Non Spark
Important!
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
