Milwaukee AGV 17-125 XE (4933432230)
Cutting Discs217
 |
The Turbo Viper – Tva Diamond Blade Is Recommended For Dry Cutting Of Hard Materials Such Asgranite, Rustic Tiles, Klinker, Refractories, Slate And, Of Course, Porcelain Tiles. The Specific Design Of more→The Diamond Rim Of The Tva Diamond Blade By Rubi Offers Faster Cutting Speed In The Hardest Materials Without Sacrificing The Quality Of The Finish.Features
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
80.99Buy!
£
£
BricoINN
Delivery: in United Kingdom
Report
This 40 V angle grinder is ideal for cutting grooves in walls, deburring or derusting metal and cutting tiles or pipes. The powerful brushless motor delivers the necessary cutting and grinding power a more→nd ensures a long lifespan. Additionally, it is very low-maintenance
 |
FEATURES:- Solid results due to optimized diamond matrix- Suitable for all types of stone- 1.6 mm Cutting width
 |
CorePlus Top Twelve General Purpose Cutting Blades provide low cost cutting in a wide variety of building materials. The blades, with premium graded quality diamond segments, and a tensioned high grad more→e steel core, were manufactured to EN 13236 quality standards. Suitable for cutting; concrete, concrete lintels, reinforced concrete lintels, hard sandstone, concrete pipes, concrete paving slabs, bricks, block paving slabs, concrete kerbs, clay pipes, hard slate, roofing tiles, quarry tiles, etc. Specification: Segment Height: 12mm.
 |
Reliable Cuts - The X-LOCK Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building materials. Its optimised diamond matrix delivers solid results thanks to the disc's more→high-quality standards. Bosch's diamond competence centre in Switzerland ensures these standards by enabling consistent quality time and again. X-LOCK cutting discs also fit standard angle grinders. Changing cutting discs is fast and convenient thanks to the keyless X-LOCK system. Click it on with X-LOCK – the fastest accessory-chang
 |
Makita's Diamak Diamond Cutting Discs with segmented rim. The segmented blade is designed to cut most masonry materials including Masonry, brick, block, light concrete, sandstone, limestone and slate. more→Specifications • Diameter: 125mm • Bore: 22.23mm • Ring: 20mm • Pack Quantity: 1
 |
Reliable Cuts - The Standard for Universal Turbo Diamond Cutting Disc delivers reliable cuts in universal building materials. Its diamond matrix is engineered for cutting various construction componen more→ts, resulting in well-formed cutting edges. These high-qualitity standards are ensured by the Bosch diamond competence centre in Switzerland. Use this disc when cutting building materials such as concrete and masonry. It is compatible with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Cuts in Universal Building Materials • Standard for Universal Turbo Diamond Cutting Disc delivers reliable cuts in universal building materials …
Wire & Cup Brushes309
 |
Price from £20.98 up to £23.95
Compare prices5→Compare prices and buy Lessmann 423.17X X-Lock Crimped Steel Bevel Brush 115Mm Non Spark LES42317X
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting they can be used for polishing light deburring work and removing rust paint dir more→t and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses car workshops and by staircase railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Crimped Steel Bevel Brush 115mm Non SparkPTDLES4231
 |
Price from £24.49 up to £34.95
Compare prices6→Compare prices and buy Bosch Pt Clean Metal 100x0.5x180 Mm M14 Brush Cup 1608614011
Clean For Metal Wire Cup Brush Provides An Extra-Fine Surface Finish. Brush Wires Are Available In Different Thicknesses For Variable Levels Of Abrasive Needs. Thicker Wires Are More Aggressive, Produ more→cing A Coarser Yet Faster Surface Finish, While Thinner Wires Deliver Finer, Smoother Surface Results. It Is Intended For Use With Angle Grinders With An M14 Thread.Features
 |
Price from £4.91 up to £6.95
Compare prices6→Compare prices and buy Draper Brassed Steel Crimped Wire Brush Set set 1 07435 (3 Piece)
This Set Of Wire Brushes Is Designed For Light To Medium-Duty Work And Delivers Rapid Stock Removal From A Wide Variety Of Surfaces. The Brushes Are Made From Hardened Dipped Brassed Steel Wire Which more→Gives A High Level Of Durability And Resistance To Oxidation. The Brushes Are Strong Enough To Provide Reliable Performance And The Crimping Is Flexible To Tackle Recessed Areas And Irregular Surfaces. The Set Includes A 25Mm Wire End Brush 50Mm Wire Cup Brush And A 50Mm Wire Wheel Brush. Fitted With A Non-Slip 6.35Mm Hex Shank. Compatible With Most Drill Drivers And Drills With A 13Mm Chuck.PTDDRPDIR
 |
14.81Buy!
£
£
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting and the removal of slag rust scale or concrete waste.Lessmann knotted brushes are filled with a special s more→teel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.This Lessmann Knot Cup Brush has the following specification: Diameter: 65mmThread: M10 x 1.25Wire Gauge. 0.50Wire Type. SteelMax. R.P.M. 12 500PTDLES482213
 |
Price from £3.28 up to £4.95
Compare prices6→Compare prices and buy Draper 41433 Brassed Steel Crimped Wire Cup Brush 75Mm each 1
This wire cup brush is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The bristles are made from hardened dipped brassed steel wire which giv more→es a high level of durability and resistance to oxidation. The brush is strong enough to provide reliable performance and the crimping is flexible to tackle recessed areas and irregular surfaces. The cup shape works flat to the surface to cover a large surface area. Fitted with a non-slip 6.35mm hex shank. Compatible with most drill drivers and drills with a 13mm chuck.PTDDRPDIR
 |
Price from £5.95
Compare prices5→Compare prices and buy Bosch 0.2mm Crimped Steel Wire Wheel Brush 75mm 6mm Shank 1608622015
Fine Finish on Steel - The Wire Wheel provides a good fine surface finish. Fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces, it is ideal for removing annealin more→g colour on welded seams. The wire wheel is suitable for cleaning work at high circumferential speeds on smaller steel surfaces, edges or in grooves. Moreover, it is suitable for removing rust, roughing, mat sanding and paint stripping. It is intended for use with drills with 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother …
 |
Price from £14.06 up to £22.99
Compare prices6→Compare prices and buy Faithfull Wire Conical Brush 115Mm Xlock Ss, Multi FAIWBCTSSXL
X-LOCK Conical Wire Brush for heavy-duty applications. Twist knot brushes are suitable for the removal of slag, rust, scale or even dried cement from welds, edges and grooves. For use on stainless ste more→el surfaces, aluminium and non-ferrous metal surfaces. Using standard wire brushes on stainless steel can contaminate and cause the material to rust. The X-LOCK quick change system ensures a fast, reliable and effective one click change between tools when used with a compatible angle grinder. Features: X-LOCK quick change system for fast change between tools 0.5mm twist knot stainless steel wire (304) 0.5mm twist knot stainless steel wire (304) Use with stainless steel, aluminium and non-ferrous …
 |
Price from £6.49
Compare prices5→Compare prices and buy Stanley Crimped Steel Wire Cup Brush 25mm 6mm Shank STA36025
Designed for use with electric drills, this Stanley crimped wire brush is ideal for removing light rust and for general surface preparation tasks on metal. Features & Benefits • Crimped steel wir more→es • Less aggressive than twist knot brushes • Suitable for various metal preparation tasks • Designed for use in a standard electric drill Specifications • Diameter: 25mm • Pack Quantity: 1
Important!
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
