Milwaukee M18 BLSAG125X-0 (4933492643)
Cutting Discs248
![]() |
The 3-in-1 Disc guarantees high finish results when cutting, grinding and finishing on metal and Inox with one disc. Ideal results can be achieved when cutting due to high-quality abrasives. At the sa more→me time, thanks to its precision-manufactured fibreglass net, safe grinding with 2.5 mm thickness is achievable. It is also an ideal solution for hard-to-reach areas. As the disc has a higher grit size than comparable grinding discs, finishing with clean results on surfaces is feasible. Bosch discs comply with maximum safety requirements such as EN 12413, FEPA and oSa. Use this disc for working on metal and inox. The 3-in-1 Disc is compatible with angle grinders.With depressed centre• High …
![]() |
Cuts materials that angle grinders previously couldn’tProfessionals value angle grinders for their ability to cut tough materials like concrete, stone and metal. With the Expert Carbide Multi Wheel th more→is wonderful tool can be even more versatile, efficiently cutting all kinds of softer materials such as wood, plastic and modern composites.The Expert Carbide Multi Wheel uses sharp carbide grits on its rim to cut multiple materials extremely effectively. The grits are joined to a steel body by a laser technique for an extra strong bond, giving a safe and reliable cutting disc that maintains a constant speed and depth throughout a long lifespan.With the Expert Carbide Multi Wheel, your angle grinder be…
![]() |
Up to 3x more precise than a standard ceramic diamond discThe tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore crucia more→l yet difficult. The Expert HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics.Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut.The Bosch Expert …
![]() |
Lasts up to 100x longer than a bonded cutting discCutting metals such as steel and cast iron has traditionally been tough on angle grinder discs, and many workers are familiar with the chemical smell more→of bonded discs burning away while they cut. With the Expert Diamond Metal Wheel, this smell can be consigned to the past – as can regular trips to a shop to buy new metal discs.The Expert Diamond Metal Wheel uses Bosch Diamond Technology, which means optimum quality diamond grits fixed to a steel body. This super-hard edge lasts many times longer than even the best bonded discs and can cut a wide variety of ferrous and non-ferrous metals with ease. It doesn’t shatter if dropped, produces no chem…
![]() |
The Turbo Viper – Tva Diamond Blade Is Recommended For Dry Cutting Of Hard Materials Such Asgranite, Rustic Tiles, Klinker, Refractories, Slate And, Of Course, Porcelain Tiles. The Specific Design Of more→The Diamond Rim Of The Tva Diamond Blade By Rubi Offers Faster Cutting Speed In The Hardest Materials Without Sacrificing The Quality Of The Finish.Features:- Higher Cutting SpeedSpecifications:- Weight: 0,152 Kg- Measurements: 125mm
![]() |
The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into more→place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock cutting discs can be used in standard angle grinders as well as X Lock machines. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in …
![]() |
Features:- For reliable cutting in general building material- Optimized diamond matrix in high quality standard for solid results
![]() |
These Makita Tungsten Carbide Grit Blades for X-LOCK grinders are suitable for cutting a variety of materials including plaster board, PVC, FRP & copper. Supports the X-LOCK system which allows for sa more→fe and easy disc installation and removal. Specifications • Diameter: 125 mm • Fitting: X-LOCK • Thickness: 2mm • Pack Quantity: 1 • TC Grit: 30/40 Features & Benefits • Suitable for cutting a variety of materials including plaster board, PVC, FRP & copper • Supports the X-LOCK system which allows for safe and easy disc installation and removal
Wire & Cup Brushes209
![]() |
Price from £8.95
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush 23mm 6mm Shank LES453161
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 23mm.Wire Height: 25mm.Wire Gauge: 0.30.Max Speed: 20,000/rpm.Additional Information:• Diameter: 23mm• Type: Flat End• Wire: 0.30 Steel
![]() |
Price from £3.49 up to £4.77
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Stainless Steel 50mm with 6mm Shaft
• Flat wire brush.• Crimped stainless steel filaments.• Shaft: ø6mm.• Diameter: ø50mm.• Maximum Speed: 4500rpm.Flat wire brush with crimped stainless steel filaments, 50mm width and a 6mm sh more→aft.• Flat wire brush. • Crimped stainless steel filaments. • Shaft: ø6mm. • Width: ø50mm. • Maximum Speed: 4500rpm. • Model No. SFBS50Technical Specification:Diameter: 50mmMaximum Speed: 4500rpmNett Weight: 0.03kgShaft Diameter: 6mmDimensions: Length: 40mm x Height: 152mmWeight: 0.052KgWarranty: Consumable
![]() |
Price from £3.95
Compare prices3→Compare prices and buy Faithfull Point End Crimped Wire Brush 23mm 6mm Shank WBSI23P
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. Suitable for cleaning paint or deburring of moulds or castings in hard-to-reach areas such as cylinders. Can be used in industrial power tools at higher speeds. Type: Pointed end Face diameter: 23/60 mm x 25 mm Shaft: 6 mm (1/4in) Wire: 0.3 mm steel Conforms to ISO 9001. and DIN EN1083-1 and 2 Maximum rpm 20,000.Additional Information:• Diameter: 23mm• Type: Pointed End• Wire: 0.30 Steel
![]() |
Price from £7.49
Compare prices5→Compare prices and buy Bosch 0.35mm Knotted Steel Wire Pencil Brush 10mm 6mm Shank 2608622115
The Pencil Brush provides a good coarse surface finish. Fitted with knotted wire, it is ideal for medium-duty cleaning applications on small steel surfaces. Its shape makes it ideal for cleaning work more→in very hard-to-reach areas such as in corners and the inside of pipes and profiles. The brush is also suitable for removing heavy rust and varnish as well as stripping paint. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results It is intended for use with drills with a 6-mm shank.Pencil brush – knotted wireIdeal for wo…
![]() |
Price from £5.95
Compare prices4→Compare prices and buy Makita 3 Piece Wire Brush Set D-66070
Designed for use with power tools, this set contains three types of wire brush - cup, wheel and end. All brushes have a 6mm (1/4") straight shank and can be used at a maximum RPM of 4,500. Specificati more→ons • Shank: 1/4" Straight • Pack Quantity: 3 • Max RPM: 4500 rpmFeatures & Benefits• Cup type: light duty for removing coatings, rust, and cleaning • Wheel type: light duty for removing coatings, rust, and cleaning • End type: light duty for working on hard to reach areas (pipes and profiles)
![]() |
Price from £3.16 up to £5.32
Compare prices7→Compare prices and buy Draper Rotary Wire Brush, 6 x 75mm
Brassed crimped steel wire with 6mm diameter shank. Display packed.
![]() |
Price from £6.99 up to £7.49
Compare prices5→Compare prices and buy Bosch 0.2mm Crimped Steel Wire Wheel Brush 100mm 6mm Shank 1609200274
The Wire Wheel provides a good fine surface finish. Fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces, it is ideal for removing annealing colour on welded seam more→s. The wire wheel is suitable for cleaning work at high circumferential speeds on smaller steel surfaces, edges or in grooves. Moreover, it is suitable for removing rust, roughing, mat sanding and paint stripping. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use with drills with 6-mm shank.Wire …
![]() |
Price from £7.49
Compare prices4→Compare prices and buy Bosch 0.3mm Crimped Inox Steel Wire Pencil Brush 25mm 6mm Shank 2608622127
The Pencil Brush provides a good fine surface finish. It is fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces. Due to its shape, the pencil brush is ideal for more→cleaning work in very hard-to-reach areas on stainless steel, aluminium and non-ferrous metal surfaces as well as in corners and the inside of pipes and profiles. It is also suitable for removing rust, roughing, matt sanding and paint stripping. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use …
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.