MODECO MN-90-211

Fast Drilling in Metal - The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents more→wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. There is a low risk of breakage, especially for drill bits below …

Jobber length drill with taper shank

Osborn Goldex 81504 series jobber drill bits. High quality HSS fully ground titanium coated drill point for longer life. Suitable for drilling in steel, cast steel (alloyed and non-alloyed), grey cast more→iron, graphite and malleable cast iron. Features & Benefits • High speed steel TiN coated jobber drills • For drilling in steel, cast steel- alloyed and non-alloyed, stainless steel, titanium and aluminium • Standards DIN 338 • Self centering split point above 1.6mm • Bright finish body for maximum chip clearance Specifications • Size: 6.5mm • Flute Length: 63mm • Quantity: Pack of 5 • Point Angle: 118° • Point Type & Helix Angle: N ~ 30° …

The Bahco Series 414 Bevel Edge Chisels are a durable multipurpose chisel, which has been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a prec more→ision ground blade for maximum sharpness and long-lasting performance. Polypropylene handle and with a protective holster includedType: bevel edge. Size: 8mm.Additional Information:• Chisel Type: Bevel Edge• Size (mm): 8

• Supplied with hex drive adaptor for matched balance and extractor drift.• Thick wall body with multi slot extraction and 8mm high diamond segments.• High-speed drilling when used on lightweight buil more→ding material such as; soft stone, facing bricks, breeze blocks and insulation blocks. (Not suitable for reinforced or non-reinforced concrete.)• For dry drilling only.• Supplied with integral hex shanks.Supplied with hex drive adaptor for matched balance and extractor drift. Thick wall body with multi slot extraction and 8mm high diamond segments. High-speed drilling when used on lightweight building material such as; soft stone, facing bricks, breeze blocks and insulation blocks. (Not suitable f…

• HSS Dura 25 core bit with QuickIN holder• TiN surface coating for outstanding service lives and the best glide properties.• Metric dimensions, cutting depth 25 mm.SpecificationsCuttin more→g depth: 25 mmBore Ø: 26 mm

DeWalt chisels deliver dependable results even in the most difficult conditions. Specially toughened steel and microprocessor controlled heat treatment ensures tough chisels that last a long time. Spe more→cifications • Shank: SDS Plus • Width: 25mm • Length: 300mm

The Bahco 424 Series Bevel Edge Chisels are durable multi-purpose chisels which have been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a prec more→ision ground blade for maximum sharpness and long-lasting performance. The specially designed 2-component handle, maximises control and comfort in use. The blades are honed ready-to-use.Includes protective holster. Size: 20mm.Additional Information:• Chisel Type: Bevel Edge• Size (mm): 20

Flat Chisel / Hexagonal / Total Length 400 mm / Feed Opening 22 mm / Stone / 1 Piece

The Bahco 424 Series Bevel Edge Chisels are durable multi-purpose chisels which have been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a prec more→ision ground blade for maximum sharpness and long-lasting performance. The specially designed 2-component handle, maximises control and comfort in use. The blades are honed ready-to-use.Includes protective holster. Size: 12mm.Additional Information:• Chisel Type: Bevel Edge• Size (mm): 12

Not available.

The Stanley DYNAGRIP Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. with a longer, soft grip handle for improved grip and control, forged high carbon ste more→el blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.