MPT MAG1403
Cutting Discs133
 |
Features:Carbid
 |
These Faithfull Metal Cutting Sabre Saw Blades are made from HSS Fully-Hardened Super-Speed Steel. Suitable for cutting applications in metal, aluminium and non-ferrous metals. Manufactured for precis more→ion and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved. Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.The Faithfull S918E …
 |
Irwin Sabre Saw Blades 624R 150mm 24tpi Metal Cutting Pack of 2. Size: 150mm.Teeth: 24 tpi. Note: Image is for illustrative purposes only and may differ from the actual product
 |
It features a 1/2 inch universal shank. The S 713 AW Clean for Fibre Insulation Reciprocating Saw Blade delivers clean curved and plunge cuts in special materials. Its sharp, serrated knife edge produ more→ces tear-free results, while the blade’s recessed body provides ultimate curved-cutting capabilities. Moreover, the serrated edge and a pointed tip make plunge cutting possible. Made from HCS (high carbon steel), the blade is appropriate for cutting fibre insulation materials. Its standard length of 150 mm enables a cutting capacity of up to 100 mm. The blade is ideal for use with cordless compact saws.S 713 AWHCS, blade with serrated edgeEspecially optimised for use in compact saws.Specially fo…
 |
The Bosch S922EHM blade lasts up to 50x longer than a Bi-Metal blade in tough materials The Bosch 2608900360 S922EHM Reciprocating Blade is 150mm in length with fine toothing and able to cut 100mm dia more→meter pipe up to 4mm thick. Cutting thin sheet metal and wall pipes are tough jobs, but with a good recip saw blade you can manage. The real problems start when you cut stainless steel. This tough, high-alloy steel is an obstacle to construction or renovation workers and destroys blades. Bosch Carbide Technology consigns these problems to the past. Ideal for metal workers, plumbers, installers and renovators, the Bosch EXPERT Thin Tough Metal Reciprocating Saw Blade not only does jobs that were …
 |
Milwaukee Fang Tip Demolition Reciprocating Saw Blades. The fang tip allows for faster plunge cutting and reaching into restricted areas. Nail guard protects the tooth during nail impacts for increase more→d durability and lifetime. 1.25 mm thick blade body for good strength and blade life making it ideal for wood with nails or bolts. Aggressive 5 Tpi geometry removes more material per stroke for faster cutting. Sloped shape excellent for plunge cutting and reaching into restricted areas. Shatter resistant Bi-Metal construction allows the blade to bend and flex without breaking. Specifications • Blade Length: 150mm • Max. Cutting Capacity (Plastic Pipes): 10-100mm • Max. Cutting Capacity …
 |
Steel, stainless steel, cast iron, alloys, steel pipe 1.2-2mm section.Feature
 |
MI850 Blades are described as having one of the fastest universal cuts everFeatures:- Marcrist diamond products comply with every known safety standard worldwide- Titanium coated diamonds provide self more→cooling and self sharpening cutting edge- Armoured centre for blade strength beyond belief (Patented)- Precision engineered core, hardened, ground, balanced and tensioned- Noise suppression for semi silent operation (Patented)- Lightning fast- Laser weldedMaterials
Wire & Cup Brushes210
 |
Price from £5.95 up to £6.70
Compare prices5→Compare prices and buy Makita D-66070 Wire Brush Set for Drill (3 Piece)
Makita D-66070 Wire Brush Set for Drill (3 Piece)
The Makita D-66070 is a 3 Piece Wire Brush Set designed to be used with power tools to remove rust and paint from metal objects.Feature
more→> - Cup type: light duty for removing coatings, rust, and cleaning. For flat or irregular surfaces/edges.
- Wheel type: light duty for removing coatings, rust, and cleaning. For flat or irregular surfaces/edges.
- End type: light duty for working on hard to reach areas (pipes and profiles).
Specificatio
- Part Number: D-66070
- Number of Pieces: 3
The Makita D-66070 is a 3 Piece Wire Brush Set designed to be used with power tools to remove rust and paint from metal objects.Feature
more→> - Cup type: light duty for removing coatings, rust, and cleaning. For flat or irregular surfaces/edges.
- Wheel type: light duty for removing coatings, rust, and cleaning. For flat or irregular surfaces/edges.
- End type: light duty for working on hard to reach areas (pipes and profiles).
Specificatio
- Part Number: D-66070
- Number of Pieces: 3
 |
Price from £8.49
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush Pointed End 12mm 6mm Shank LES451162
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann Pointed End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 12mm.Wire Height: 20mm.Wire Gauge: 0.30.Max Speed: 20,000/rpm.Addi
 |
Price from £4.95 up to £5.85
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Stainless Steel 75mm with 6mm Shaft
• Flat wire brush.• Crimped stainless steel filaments.• Shaft: ø6mm.• Diameter: ø75mm.• Maximum Speed: 4500rpm.Flat wire brush with crimped stainless steel filaments, 75mm width and a 6mm sh more→aft.• Flat wire brush. • Crimped stainless steel filaments. • Shaft: ø6mm. • Diameter: ø75mm. • Maximum Speed: 4500rpm. • Model No. SFBS75Technical Specification:D
 |
Price from £3.49
Compare prices3→Compare prices and buy Faithfull Crimped Wire Cup Brush 75mm 6mm Shank WBS75
This Faithfull crimped steel Wire Cup Brush is designed for light to medium-duty applications, such as cleaning metal surfaces prior to welding or painting. The wire brush is fitted with a 6mm (1/4in) more→shank and is designed to operate with power tools with a maximum speed of 4,500/min. Type: Cup.The FAIWBS75 Wire Cup Brush has the following specifications: Face Diameter: 75 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm crimped steel wire. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £3.95
Compare prices3→Compare prices and buy Faithfull Point End Crimped Wire Brush 23mm 6mm Shank WBSI23P
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. Suitable for cleaning paint or deburring of moulds or castings in hard-to-reach areas such as cylinders. Can be used in industrial power tools at higher speeds. Type: Pointed end Face diameter: 23/60 mm x 25 mm Shaft: 6 mm (1/4in) Wire: 0.3 mm steel Conforms to ISO 9001. and DIN EN1083-1 and 2 Maximum rpm 20,000.Addition
 |
Price from £2.08 up to £2.86
Compare prices6→Compare prices and buy Draper Flat Top Decarbonizing Wire Brush, 13mm
Brassed crimped steel wire brush with flat trim. 6mm diameter shanks. Brush length 25mm. Display packed.
 |
Price from £2.95
Compare prices3→Compare prices and buy Faithfull Crimped Wire End Brush 25mm 6mm Shank WBS25E
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBS25E Wire End Brush has the following specifications: Type: Flat End. Face Diameter: 25 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £7.49
Compare prices5→Compare prices and buy Bosch 0.35mm Knotted Steel Wire Pencil Brush 10mm 6mm Shank 2608622115
The Pencil Brush provides a good coarse surface finish. Fitted with knotted wire, it is ideal for medium-duty cleaning applications on small steel surfaces. Its shape makes it ideal for cleaning work more→in very hard-to-reach areas such as in corners and the inside of pipes and profiles. The brush is also suitable for removing heavy rust and varnish as well as stripping paint. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results It is intended for use with drills with a 6-mm shank.Pencil brush – knotted wireIdeal for wo…
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
