MSW EAG 1200 (10061037)
Cutting Discs183
 |
Bosch 2608602202 Standard For Ceramic Diamond Cutting Disc 125mmThe Bosch 2608602202 Diamond Cutting Disc is designed for use on ceramic and tile. It has a 125mm diameter and gives a 1.6mm cutting wi more→dth. It gives exact accurate cutting results in all types of tile thanks to its continuous cutting rim.Features:
- To be used with an angle grinder or circular saw
- This diamond cutting disc is suitable for cutting ceramics, porcelain, tile and fine stonewareSpecif
- Diameter: 125mm
- Bore diameter: 22.23mm
- Cutting width: 1.6mm
- Segment height: 7mm
- To be used with an angle grinder or circular saw
- This diamond cutting disc is suitable for cutting ceramics, porcelain, tile and fine stonewareSpecif
- Diameter: 125mm
- Bore diameter: 22.23mm
- Cutting width: 1.6mm
- Segment height: 7mm
 |
Fast and Powerful Cutting - The X-LOCK Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced pheno more→l resin, which copes with demanding applications while delivering good results. Moreover, the disc's precision-manuf
 |
Lasts up to 100x longer than a bonded cutting disc - Cutting metals such as steel and cast iron has traditionally been tough on angle grinder discs, and many workers are familiar with the chemical sme more→ll of bonded discs burning away while they cut. With the EXPERT Diamond Metal Wheel, this smell can be consigned to the past – as can regular trips to a shop to buy new metal discs. The EXPERT Diamond Metal Wheel uses Bosch Diamond Technology, which means optimum quality diamond grits fixed to a steel body. This super-hard edge lasts many times longer than even the best bonded discs and can cut a wide variety of ferrous and non-ferrous metals with ease. It doesn’t shatter if dropped, produces no c…
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Crafted with high-quality diamonds embedded in the segmented rim, this blade excels in delivering precise and clean cuts through concrete surfaces. The robust construction ensures longevity, providing more→you with a reliable tool for repeated use on your construction projects. Measuring 125mm in diameter and featuring a 22.23mm bore size, this diamond blade is specifically designed for compatibility with angle grinders, providing optimal performance and coverage. The segmented rim design ensures aggressive cutting action, making it ideal for a variety of concrete cutting tasks. Features & Benefits • Segmented rim for general purpose cutting of concrete, paving blocks, and thermal block • …
 |
Excellent Lifetime - The X571 Best for Metal has an excellent lifetime when grinding welding seams and coarse sanding metal surfaces. Its high-quality zirconia alumina/semi-fr
 |
• Zirconium flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• More durable than normal sanding discs.• Abrasive flaps are attached to rigid disc wit more→h epoxy adhesive - does not require backing pad.• Depressed centre disc suitable for electric and air tools.• Size/Bore: ø125/22mm.
 |
Lenox MetalMax is a new alternative to abrasive cut-off discs. Its breakthrough diamond technology delivers extreme durability to help you maximise work efficiencies and reduce costs in your metal cut more→ting jobs. MetalMax blades are recommended for multiple types of metal including steel, sheet metal, stainless steel, rebar, cast iron, aluminium and non-ferrous metals. Designed for use in the same power tools as bonded abrasive discs, at the same RPMs and feed forces, MetalMax blades can be used without having to change any operating settings. Specifications • Diameter: 125mm • Thickness: 1.3mm • Arbor: 22.23mm
Wire & Cup Brushes208
 |
Price from £5.95 up to £5.99
Compare prices7→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Pencil Brush 25mm 6mm Shank 1609200269
Fine Finish on Steel - The End Brush provides a good fine surface finish. It is fitted with crimped wire for light- to medium-duty cleaning applications on small steel surfaces. Its shape makes it ide more→al for cleaning work in very hard-to-reach areas such as in corners and the inside of pipes and profiles. The end brush is also suitable for removing rust, roughing, matt sanding and paint stripping. It is intended for use with drills with a 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. Cylindrical shank …
 |
Price from £10.40 up to £14.08
Compare prices6→Compare prices and buy Draper Crimped Wire Cup Brush, 100mm, M14
Manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. M14 thread. Display packed.
 |
Price from £3.49 up to £3.59
Compare prices4→Compare prices and buy Faithfull Crimped Wire Cup Brush 75mm 6mm Shank WBS75
This Faithfull crimped steel Wire Cup Brush is designed for light to medium-duty applications, such as cleaning metal surfaces prior to welding or painting. The wire brush is fitted with a 6mm (1/4in) more→shank and is designed to operate with power tools with a maximum speed of 4,500/min. Type: Cup.The FAIWBS75 Wire Cup Brush has the following specifications: Face Diameter: 75 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm crimped steel wire. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £5.49 up to £6.71
Compare prices5→Compare prices and buy Sealey Brassed Steel Cup Brush Ø75mm M10 x 1.5mm
• Suitable for use with power tools up to the maximum rated rpm.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power tools up to the maximum rated rpm. C more→rimped brassed steel filaments add extra rigidity and cleaning power.• Suitable for use with power tools up to the maximum rated rpm. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. CBC75Technical Specification:D
 |
Price from £15.95
Compare prices3→Compare prices and buy Lessmann Crimped Steel Wire Cup Brush 60mm M10 x 1.5 Thread LES421164
The Lessmann Cup Brushes are filled with crimped wire and are ideal for working on large surfaces. They can also be used for the removal of rust, paint, dirt or scale and for polishing. A range of siz more→es and wire styles are available.Lessm
 |
Price from £17.95 up to £26.99
Compare prices7→Compare prices and buy Draper Expert Crimped Wire Cup Brush, 80mm, M14
Expert Quality, industrial quality manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. Carton packed.
 |
Price from £7.49
Compare prices5→Compare prices and buy Bosch 0.35mm Knotted Steel Wire Pencil Brush 10mm 6mm Shank 2608622115
Coarse Finish on Steel - The End Brush provides a good coarse surface finish. Fitted with knotted wire, it is ideal for medium-duty cleaning applications on small steel surfaces. Its shape makes it id more→eal for cleaning work in very hard-to-reach areas such as in corners and the inside of pipes and profiles. The brush is also suitable for removing heavy rust and varnish as well as stripping paint. It is intended for use with drills with a 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results Cylindrical shank …
 |
Price from £4.49 up to £6.29
Compare prices6→Compare prices and buy Sealey Flat Wire Brush Ø100mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB100Technical Specification:D
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
