Orvaldi 600 LCD 600 VA
UPS Batteries448
Liquid crystal displayFor status monitoring and set-up
Load outputOver-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the more→load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. The connect and disconnect voltages are adjustable.
Day/night timing of the load outputThis option allows for a pre-set ON-time after dusk.
Programmable battery charge algorithmPreprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only).
Current (A): 30.0
Made in: >>>>>…
Load outputOver-disc
Day/night timing of the load outputThis option allows for a pre-set ON-time after dusk.
Programmable battery charge algorithmPrepro
Current (A): 30.0
Made in: >>>>>
Victron Energy battery indicator panel shows the state of charge of the battery and is a Practical solution for Battery Management
The battery indicator panel shows the state of charge of the b more→attery, It is an accessory for the Blue Smart and Blue Power IP65 Chargers
Suitable for 12-Volt lead acid batteries only (flooded, GEL, AGM). Not suitable for Lithium
After using the battery it takes about 30 minutes for the battery to regain its steady state condition and for the panel to show a correct status indication
The ‘traffic light’ system shows your battery’s charge status simply and clearly
The battery indicator panel shows the state of charge of the b more→attery, It is an accessory for the Blue Smart and Blue Power IP65 Chargers
Suitable for 12-Volt lead acid batteries only (flooded, GEL, AGM). Not suitable for Lithium
After using the battery it takes about 30 minutes for the battery to regain its steady state condition and for the panel to show a correct status indication
The ‘traffic light’ system shows your battery’s charge status simply and clearly
Liquid crystal displayFor status monitoring and set-up
Load outputOver-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the more→load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. The connect and disconnect voltages are adjustable.
Day/night timing of the load outputThis option allows for a pre-set ON-time after dusk.
Programmable battery charge algorithmPreprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only).
Power Supply: None
UK/EU >>>>>…
Load outputOver-disc
Day/night timing of the load outputThis option allows for a pre-set ON-time after dusk.
Programmable battery charge algorithmPrepro
Power Supply: None
UK/EU >>>>>
Surge Protectors & Extension Leads334
20.49Buy!
£
£
Tradeinn.com
Report
surge protector, sockets 6, USB A 2, max 12 W, cable 2 m, child protection
Portable Power Stations1
Important!
Compatibility with specific UPS models should be checked with manager of online store immediately before purchase.
Compatibility with specific UPS models should be checked with manager of online store immediately before purchase.