Parkside PWS 115 B2
Cutting Discs358
 |
Flat cutting disc designed for fast straight cutting of stainless-steel (inox). Also suitable for use on other metal working applications including steel, structural steel and sheet metal. Manufacture more→d from premium quality aluminium oxide, which has been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. Ultra-thin 1mm disc for rapid efficient cutting. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine. Compatible with 115mm angle grinders with a 22.23mm bore. Manufactured to EN12413 standards.
 |
Bosch Inox Cutting Disc for Fast, Clean cuts Maximum circumferential speed: 80 m/s (depending on rpm and disc diameter) Disc Diameter: 115 mm Bore Diameter: 22.23 mm Thickness: 1.0 mm Max Speed: 12,25 more→0 rpm Fe/S/CI < 0.1%
 |
Fast and Powerful Cutting - The X-LOCK Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced pheno more→l resin, which copes with demanding applications while delivering good results. Moreover, the disc's precision-manuf
 |
The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into more→place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock diamond cutting discs are suitable for cutting concrete, granite and marble. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in seconds …
 |
• General-purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools.• Pack of 50.General-purp
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
A flat metal cutting disc which is ideal for working on steel. Part of a range of Makita reinforced abrasive cutting and grinding discs which are suitable for use with grinders and disc cutters. Speci more→fications • Model No: D-18661 (replaces A-85307) • Diameter: 115mm • Thickness: 2.5mm • Bore: 22.23mm • Quantity: 1 Note generic image is shown for illustration purposes. Please refer to the description for the specifications of the item you will be purchasing Features and Benefits • Flat centre cutting disc • Ideal for cutting steel
 |
X-LOCK 2-piece changing system to switch angle grinder accessories with just one click. The X-shaped interface of the grinders head and the accessory allows easy and effortless mounting. Features and more→Benefits: Convenient X-Lock locking system for quick and safe changes. Manufactured for use with stainless steel (iron, chlorine and sulphur-free) Fast and clean cuts without burr formation or blue discoloration Quick efficient cutting with minimum material removal and machine wear Achieve straight and accurate cuts Typical Applications: Used across a broad range of industries including Automotive, Foundry, Fabrication, Aerospace and Construction Cutting discs must never be used for grinding …
Wire & Cup Brushes324
 |
Price from £19.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Conical Knot Brush 100mm M14 Thread LES471257
The Lessmann Conical Knot Brushes with left hand twisted knots to increase stability. The special shape of the conical brushes enables the user to work in hard to reach places. They have been designed more→for heavy-duty use, for the preparing of metal surfaces before painting, and the removal of slag, rust, scale, or concrete waste.Diameter. 100mm.Width. 10mm.Bore. M14.Wire Gauge. 0.50.Wire Type. Steel.Max R.P.M. 12,500Additiona
 |
Price from £4.49 up to £4.99
Compare prices4→Compare prices and buy Faithfull Wire Cup Brush 60mm M14x2, 0.30mm Steel Wire FAIWBC60
Faithfull Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for indust more→rial use and more specialist applications.
 |
Price from £8.95
Compare prices3→Compare prices and buy Faithfull Stainless Steel Crimped Wire Cup Brush 75mm M14 Thread WBC75S
Faithfull Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for indust more→rial use and more specialist applications.Wi
 |
Price from £6.49 up to £7.29
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Stainless Steel 100mm with 6mm Shaft
• Flat wire brush.• Crimped stainless steel filaments.• Shaft: ø6mm.• Diameter: ø100mm.• Maximum Speed: 4500rpm.Flat wire brush with crimped stainless steel filaments, 100mm width and a 6mm more→shaft.• Flat wire brush. • Crimped stainless steel filaments. • Shaft: ø6mm. • Diameter: ø100mm. • Maximum Speed: 4500rpm. • Model No. SFBS100Technica
 |
Price from £12.95
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush Pointed End 23mm 6mm Shank LES453162
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann Pointed End Brush With Shank has the following specification: Wire Type: SteelDiameter: 23mmWire Height: 25mmWire Gauge: 0.30Max Speed: 18,000/rpmAddit
 |
Price from £6.49
Compare prices4→Compare prices and buy Bosch 0.2mm Crimped Inox Steel Wire Pencil Brush 15mm 6mm Shank 2608622126
Fine Finish on Stainless Steel - The End Brush provides a good fine surface finish. It is fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces. Due to its shape, more→the end brush is ideal for cleaning work in very hard-to-reach areas on stainless steel, aluminium and non-ferrous metal surfaces as well as in corners and the inside of pipes and profiles. It is also suitable for removing rust, roughing, matt sanding and paint stripping. It is intended for use with drills with a 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while …
 |
Price from £12.52 up to £16.95
Compare prices5→Compare prices and buy Bosch 0.35mm Knotted Steel Wire Cup Brush 75mm M14 Thread 2608622099
Extra-Coarse Finish - The Heavy for Metal Wire Cup Brush provides an extra-coarse surface finish. This cup brush is fitted with knotted wire for heavy-duty cleaning applications. Ideal for use in meta more→l, it is suitable for cleaning work on medium to large steel surfaces, such as removing heavy rust, underseal, paint or varnish. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. Fits GGS 6 and GGS 8 straight grinders with M14 thread. Features and Benefits …
 |
Price from £6.49 up to £6.59
Compare prices4→Compare prices and buy Lessmann DIY Cup Brush with Shank 50mm, 0.35 Steel Wire LES43012307
The Lessmann DIY Cup Brush is fitted with 6mm shank. It has been designed for working on large surfaces, generally for the removal of rust, paint, dirt or scale, and for polishing. 430.123.07 Wire 0.3 more→5 Steel, Diameter 50mm. 430.133.07 Wire 0.35 Steel, Diameter 75mm. 430.126.07 Wire 0.25 Brass, Diameter 50mm. The Lessmann DIY Cup Brush has the following specification Wire 0.35 Steel. Diameter 50mm. Max/Min 4.500.
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
