Patriot AG 115 110301200
Cutting Discs351
 |
Zirconium flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation. More durable than aluminium oxide flap discs. Abrasive flaps are attached to rigid disc w more→ith epoxy adhesive - does not require backing pad. Depressed centre disc suitable for electric and air tools. Features and Benefits • Zirconium flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation. • More durable than aluminium oxide flap discs. • Abrasive flaps attached to rigid disc with epoxy adhesive - does not require backing pad. • Depressed centre disc suitable for electric and air tools. • Size/Bore: Ø115/22mm. • Model No. FD11580 Specificatio&he
 |
• Aluminium oxide flap discs for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• Pack contains four different levels of abrasion, for assorted applications and more→finishes.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require backing pad.• Depressed centre discs suitable for electric and air tools.• Size/Bore: ø115/22mm.
 |
Depressed Centre (DPC) grinding disc designed for grinding on various metal working applications including steel, structural steel and sheet metal. Manufactured from premium quality aluminium oxide, w more→hich has been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine. Manufactured to EN12413 standards.
 |
The Marcrist TG750 Thin Grout Raking Diamond Blade is a high-performanc
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Depressed Centre Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Depresse more→d centre cutting discs have been developed to make angle grinders more versatile in use by allowing better access in some applications. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the …
 |
The Expert for Stone Cutting Disc provides powerful cutting performance in stone with maximum safety. The disc is composed of high-quality silicon carbide and resin specifically designed for work on s more→tone with impressive results. The disc's precision-manuf
 |
Extra-Clean Cuts in Porcelain - The Best for Ceramic Extra Clean Turbo Diamond Cutting Disc provides extra-clean cuts in porcelain. Its turbo rim is designed to achieve neat results in all kinds of ha more→rd ceramics, while the optimised diamond matrix delivers chip-free cuts. Use this disc for cutting ceramic, porcelain and fine stoneware. It is compatible with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Clean Cuts in Porcelain • Best for Ceramic Extra Clean Turbo Diamond Cutting Disc provides extra-clean cuts in porcelain • Turbo rim for neat results in all kinds of hard ceramics Specifications Diameter: 115mm Bore diameter: …
Wire & Cup Brushes322
 |
Price from £46.95
Compare prices3→Compare prices and buy Lessmann 0.5 Stainless Steel Wire Knot Wheel Brush 115mm 22.2mm Bore LES47
The Lessmann Knot Wheel Brushes are for grinders, angle grinders and stationary machines, used in the preparation and re-working of bolt fillet and butt welds. They remove scale, rust, paint, slag, ru more→bber residue and can be used for de-burring. They are filled with a special high tensile strength steel wire in order to meet the exacting requirements during use.This Lessmann Knot Wheel Brush has the following specification: Diameter: 115mm.Width: 14mm.Bore: 22.2mm.Wire Gauge: 0.50.Wire Type: Stainless Steel.Max RPM: 12,500/min.Addi
 |
Price from £10.40 up to £14.08
Compare prices6→Compare prices and buy Draper Crimped Wire Cup Brush, 100mm, M14
Manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. M14 thread. Display packed.
 |
Price from £3.49
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Ø75mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB75Technical Specification:D
 |
Price from £6.95 up to £10.99
Compare prices5→Compare prices and buy Faithfull Brass Wire Brush 75X0,20X6Mm Shk 0,30Mm FAIWBS75CB
Crimped Brass Wire Circular Brush for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and designed to operate with power more→tools. Conforms to ISO9001 and DIN EN1083-1 and 2. Max. Cutting Speed: 12,500 4,500/min. Features: For light-duty applications and wood finishing 6mm (1/4in) shank 6mm (1/4in) shank Maximum Speed: 4,500 rpm Specifications: Dimensions: H:13.0 x W:2.1 x D:8.0 cm Colour: Multi Guarantee:5 years Material: Brass Model Number: FAIWBS75CB
 |
Price from £14.95
Compare prices4→Compare prices and buy Bosch X Lock Crimped Steel Wire Cup Brush 75mm X-Lock 2608620725
Extra-Fine Surface Finish on Metal - The X-LOCK Clean for Metal Cup Brush, Crimped Wire provides an extra-fine surface finish. Fitted with crimped wire for light-to-medium
 |
Price from £15.95 up to £20.99
Compare prices4→Compare prices and buy Faithfull Flat Wire Brush Knot 115Xm14X2 0,35Mm S FAIWBCT115S
Flat Twist Knot Wire Brush, compatible with 115mm (4.1/2in) angle grinders with a M14 x 2 mount. Twist knot brushes are suitable for the removal of slag, rust, scale or even dried cement. Perfect for more→use on stainless steel. Standard wire brushes when used on stainless steel can contaminate and cause the material to rust. Conforms to ISO 9001, DIN EN 1083-1 and 2. Features: For the removal of slag, rust, scale or even dried cement Compatible with 115mm angle grinders Compatible with 115mm angle grinders Perfect for use on stainless steel Specifications: Dimensions: H:14.0 x W:2.5 x D:12.5 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBCT115S
 |
Price from £23.95
Compare prices3→Compare prices and buy Lessmann X Lock Non Sparking Crimped Wire Cup Brush 85mm X-Lock 423.16X
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting, they can be used for polishing, light deburring work, and removing rust, paint, dir more→t, and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses, car workshops, and by staircase, railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Crimped Cup Steel Brush 85mm Non Spark
 |
Price from £5.95 up to £5.99
Compare prices7→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Pencil Brush 25mm 6mm Shank 1609200269
Fine Finish on Steel - The End Brush provides a good fine surface finish. It is fitted with crimped wire for light- to medium-duty cleaning applications on small steel surfaces. Its shape makes it ide more→al for cleaning work in very hard-to-reach areas such as in corners and the inside of pipes and profiles. The end brush is also suitable for removing rust, roughing, matt sanding and paint stripping. It is intended for use with drills with a 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. Cylindrical shank …
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
