Phiolent Professional MF2-620E
Diamond Core Bits & Milling Cutters2272
 |
Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approxim more→ate 3mm overlap should be left before copy profiling. When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Has a sleeved bearing to allow for regrinds in case of resharpening. Specifications • Shank Diameter: 1/4 • Dia Metric: 18.2 • Cut Length Metric: 14 • Overall Length Metric: 54 • Bearing Dia Metric: 18.2
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 44.5 • Dia Imperial: 1 3/4 • Cut Length Metric: 32 • Overall Length Metric: 73
 |
Cutter for trimming and bevelling timber, lippings and plastic laminate. Can only be used in laminate trimming routers, or when straight fence guides are introduced. Solid tungsten carbide economy c more→utter. For use on short runs at 90 degrees or 45 degrees. Will trim and bevel by changing cutter height. Requires side fence or roller bearing. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 6.3 • Cut Length Imperial: 1/4 • Overall Length Metric: 38 • Angle: 45
 |
For coves and part of a rule joint. Specifications • Shank Diameter: 1/2 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 15.9 • Overall Length Metric: 56 • Rad more→ius 1 Metric: 12.7
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/2 • Dia Metric: 38.1 • Dia Imperial: 1 1/2 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 66
 |
Trend Professional 1/4in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work 12.7mm diameter X 32mm cutting depth bearing guided profiling cutter, perfect for templa more→ting and trimming work in timber, laminate and wood based materials. Deeper cutting profile for replicating thicker components with templates. Shank mounted bearing allows good vision of the template for easy and accurate following when hand held routing. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 32 • Overall Length …
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/4 • Dia Metric: 7 more→• Dia Imperial: 9/32 • Cut Length Metric: 19 • Overall Length Metric: 50
 |
Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Specifications • Shank Diameter: 1/2 • Dia Metric: 85.7 • Cut Length Metric: 15.9 • Overall Length Metric: 78.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 22.2
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
