Powermat PM-SZK-1500T
Cutting Discs234
 |
The Makita T27 WA36N Inox Grinding Disc is engineered to deliver efficient and precise grinding for both steel and stainless steel applications. Designed for versatility, this high-performanc
 |
Aluminium oxide flap disc for descaling, rust removal, weld preparation, weld cleaning and general surface preparation. Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require more→backing pad. Depressed centre disc suitable for electric and air tools. Features & Benefits: • Aluminium oxide flap disc for descaling, rust removal, weld preparation, weld cleaning and general surface preparation. • Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require backing pad. • Depressed centre disc suitable for electric and air tools. • Size/Bore: Ø125/22mm. • Model No. FD125120E Specifications: Model No FD125120E Bore: Ø22mm Brand: Sealey Disc Size: Ø125mm Grit:…
 |
Reliable Cutting - The Standard for Metal Cutting Disc cuts reliably through metal. Its aluminium oxide disc is designed for general use with metal. Use this disc for cutting metal. It is compatible w more→ith angle grinders. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Cutting in Metal • Standard for Metal Cutting Disc cuts reliably through metal • The aluminium oxide disc is designed for general use with metal Specifications Specification: A 30 S BF Diameter: 125mm Thickness: 2,5mm Thickness 2: 2,5mm Bore size: 22,23mm Bore diameter: 22,23mm
 |
Flap discs have been developed primarily as an alternative to sanding discs and can be fitted directly onto an angle grinder without a backing pad. Lasting up to 25 times longer than sanding discs the more→y also provide a much better finish which will remain constant throughout the life of the disc. These zirconium flap discs suit the majority of metal grinding applications.Si
 |
Expert For Concrete High Speed Diamond Grinding HeadFeatures:Ex
 |
Quality: A 60-R; Diameter [mm]: 125; Thickness [mm]: 1; Bore Diameter [mm]: 22.23; RPM to [rpm]: 12200
 |
Lasts up to 4x longer than a standard multi material diamond disc - On modern construction sites you need to cut a wide variety of hard materials, and these take their toll on tools. The EXPERT MultiM more→aterial Disc is the ideal accessory for busy construction professionals needing to cut concrete, brick, roofing tiles and reinforced concrete - because it simply keeps doing the job for longer. The high segments on this cutting disc are made from an advanced matrix of metal and diamonds, which is designed to stay razor sharp. These segments are laser-welded onto a hard steel body; and the sides are fluted to remove dust for efficiency and longevity. This mix of optimum diamond grits and advanced …
 |
CorePlus Top Twelve General Purpose Cutting Blades provide low cost cutting in a wide variety of building materials. The blades, with premium graded quality diamond segments, and a tensioned high grad more→e steel core, were manufactured to EN 13236 quality standards. Suitable for cutting; concrete, concrete lintels, reinforced concrete lintels, hard sandstone, concrete pipes, concrete paving slabs, bricks, block paving slabs, concrete kerbs, clay pipes, hard slate, roofing tiles, quarry tiles, etc. Specification: Segment Height: 12mm.1 x CorePlus Top Twelve General Purpose Diamond Blade 125mm.Additiona
Wire & Cup Brushes304
 |
Price from £7.02 up to £7.49
Compare prices5→Compare prices and buy Faithfull Twisted Knot Wire Wheel Brush 100mm M10 Thread WBTC100MC
Faithfull Conical Knot Brush with high tensile steel wire. Ideal for work in hard-to-reach places such as edges or corners. Suitable for the removal of slag, rust, scale or even dried cement. Max. Cut more→ting Speed: 12,500 rpm.Type: Knot conical Diameter: 100 mm Thread: M10 x 1.5 Wire: 0.5 mm twist knot steel Conforms to ISO 9001. and DIN EN1083-1 and 2Additional Information:&bu
 |
Price from £7.96 up to £14.99
Compare prices6→Compare prices and buy Faithfull Wire Brush Shaft Mtd 70 X 25Mm 0,30Mm, Multi FAIWBSI70
Industrial Wire Cup Brush for cleaning paint or deburring of moulds or castings in hard-to-reach areas such as cylinders. Can be used in industrial power tools at higher speeds. Max. Cutting Speed: 12 more→,500 rpm.Shaft: 6mm (1/4in). Features: 6mm shank For cleaning paint or deburring moulds or castings For cleaning paint or deburring moulds or castings Suitable for hard-to-reach areas Can be used in industrial power tools at higher speeds Specifications: Dimensions: H:12.5 x W:5.0 x D:8.0 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBSI70
 |
Price from £1.89 up to £2.49
Compare prices6→Compare prices and buy BlueSpot Flat Crimped Steel Wire Wheel Brush 75mm 6mm Shank 19222
The BlueSpot Tools Flat Wire Wheel Brush is ideal for preparing metal surfaces for welding and painting. Its 6mm (1/4in) shank fits most electric drills.This BlueSpot Tools Flat Steel Wire Wheel Brush more→has the following specifications: Shank: 6mm (1/4in).Wire: 0.3mm.Diameter: 75mm.Max. Safe Speed: 4,500 RPM.Additional Information:&bu
 |
Price from £11.20 up to £14.95
Compare prices6→Compare prices and buy Draper 6 Piece Brassed Steel Crimped Wire Brush Set WBSET6
This set of wire brushes is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The brushes are made from hardened dipped brassed steel wire, which more→gives a high level of durability and resistance to oxidation. The brushes are strong enough to provide reliable performance, and the crimping is flexible to tackle recessed areas and irregular surfaces. The set includes a 25mm wire end brush, 75mm wire cup brush, and three wire wheel brushes (50, 75, 100mm). Fitted with a non-slip 6.35mm hex shank. Compatible with most drill drivers and drills with a 13mm chuck. Conforms to EN1083-1 and EN1083-2 Features and Benefits • Set includes a 25mm …
 |
Price from £5.95
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Brush 70mm 6mm Shank 1609200270
Fine Finish on Steel - The Wire Cup Brush delivers an excellent, fine-surface finish. It features crimped wire for light-to-medium
 |
Price from £8.96 up to £10.95
Compare prices7→Compare prices and buy Sealey Brassed Wire Cup Brush 100mm M14 Thread CBC100
Suitable for use with power tools up to the maximum rated rpm. Crimped brassed steel filaments add extra rigidity and cleaning power. Features & Benefits: • Suitable for use with power tools up to th more→e maximum rated rpm. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. CBC100 Specifications: Model No CBC100 Brand: Sealey Diameter: Ø100mm Maximum Speed: 8500rpm Nett Weight: 0.38kg Thread: M14 x 2mm
 |
12.99Buy!
£
£
BricoINN
Delivery: in United Kingdom
Report
Specifications:- Very suitable: car body, Sheet steel, Non-ferrous metal, Wood, Plastic, Plastic - Direction of rotation: Clockwise rotation - Speed of rotation, max.: 3,000 RPM
 |
Price from £13.95
Compare prices5→Compare prices and buy Stanley Twist Knot Wire Cup Brush 70mm M14 Thread STA36080
Fitted with an M14 thread for connection to angle grinders, this twist knot steel wire cup brush is ideal for aggressive paint and rust removal or general suface preparation work on metal and stone su more→rfaces. Stanley cup brushes have an internal holding plate for improved consistency and safety. Features and Benefits • Standard M14 thread • Suitable for corded or cordless angle grinders • Heavy duty carbon steel bristles • Excellent for rust and paint removal Specifications • Stanley Part No: STA36080 • Connection: M14 • Diameter: 70mm • Max Rotation Speed: 12,000 RPM
Important!
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
