Resanta FM-1900E 75/13/2
Diamond Core Bits & Milling Cutters1651
 |
A 90° Countersink designed for chamfering standard fastener holes and removing burrs. Improved performance when machining for long periods at high speed. Taper shank design allows it to be held direct more→ly in the spindle. TiN Coating improves performance and extends tool life. Suitable for many materials. Specifications Shank: Morse Taper Shank Length chip flute - millimeter (LCF): 20mm Cutting diameter step - millimeter: 4.2mm Hand (Cutting direction): Right Flute count (NOF): 3 Point Angle (SIG): 90° Basic standard group (BSG): DIN 335 D Material code (BMC): High Speed Steel Alt Part Number (Material ID): 5973322 Material Application Priority Usage: K - Cast Iron, N - Non-ferrous metals, P - …
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 24 • Dia Imperial: 61/64 • Cut Length Metric: 19 • Overall Length Metric: 59
 |
Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Impe more→rial: 1/2 • Cut Length Metric: 6.5 • Overall Length Metric: 54 • Angle: 45
 |
Trend Professional 1/4in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work 12.7mm diameter X 9.5mm cutting depth bearing guided profiling cutter, perfect for templ more→ating and trimming work in timber, laminate and wood based materials. Shank mounted bearing allows good vision of the template for easy and accurate following when hand held routing. Ideal for trimming veneers and laminates and also for forming curved rebates and grooves with templates for increased diversity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: …
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 8 mm • Dia Metric: 4 • Dia Imperial: 5/32 • Cut Length Metric: 11 • Overall Length Metric: 60
 |
Ideal for shelves. Edge moulding applications only. Specifications • Shank Diameter: 1/2 • Dia Metric: 22 • Cut Length Metric: 25 • Overall Length Metric: 74 • Bearing Dia Me more→tric: 16 • Radius 1 Metric: 3
 |
Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications • Shank Diameter: 1/4 • Dia Metric: 11 • Cut Length more→Metric: 5 • Overall Length Metric: 52.5 • Angle: 45
 |
Trend Snappy 9.5mm diameter TCT countersink - with adjustable drill 9.5mm diameter countersink with pilot drill designed for screws up to 5mm Metric gauge. The perfect, fast swap accessory for clea more→n, consistent finishes." TCT cutting tips for assured, long life performance in all timbers and abrasive timber based materials including ply, MDF and chipboard. Fitted with high quality 3mm diameter replaceable HSS (High Speed Steel) piloting drill for 5mm Metric gauge screws in softwood or 4mm gauge in hardwood. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend …
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
