Resanta L-55/600 75/9/1

Lasts up to 50x longer than a Bi-Metal blade - When hardened screws rust or otherwise get stuck, cutting them off perfectly flat to the surface is the only option. The EXPERT MetalMax makes a perfect more→flush cut even in hardened metal and, with its outstanding longevity, is the perfect accessory for the tradesman wanting to cut tough materials with a multitool. The EXPERT MetalMax is at the very cutting edge of Bosch Carbide Technology. Not only are its teeth made from a strip of extremely hard metal that can cut even stainless steel, it also boasts a high-tech extra coating for maximum longevity. The flat edge is optimised for cut-offs as it is less prone to skidding on screws or pipes. You’ve se…

Extra-Fine Cuts for Routing - The Starlock ACZ 70 RT5 blade guarantees extra-fine cuts for routing grout and abrasive. Its extremely thin blade with a 1.6 mm cutting width creates precise fine cuts. T more→he extra-slender cutting edge is coated with a high-quality fine grit 50 for distinctively thin cuts. This accessory offers perfect results when routing extra-thin grout joints between tiles, or even grooves in porous concrete and soft brick for the laying of concealed cables and pipes. It can also cut precise recesses in difficult abrasive materials such as cement-bonded fibre boards and epoxy/glass fibre-reinforced plastic. It is suitable for use with all Starlock, Starlock Plus and Starlock Max …

• E-Cut Carbide Pro• TiN-coated carbide plunge-cut saw blade with extremely good resistance to wear. Lasts 100% longer than uncoated carbide saw blades. Lasts 30 times longer than HSS saw bl more→ades. The right choice for tough materials, such as ferrous metals, stainless steel or copper pipes. Can even be used for hardened screws (Spax) and high-strength machine screws. But also ideally suited to abrasive materials, such as bricks, masonry or fibre cement boards as well as laminate, carbon fibre-reinforced plastic and fibreglass-reinforced plastic. Good cutting results and cutting quality in all timber materials, such as hardwood or chipboard.• Narrow, with waist for optimum cutting …

Very clean finish top and bottom - Ensuring the ‘clean side’ of a jigsaw cut is on the visible part of the work material has always been an art among joiners and woodworkers. Sometimes you can turn th more→e workpiece over, other times the jigsaw itself can be held upside down. Or you could use the EXPERT ‘Wood 2-side clean’, that offers a perfect tear-free cut on both sides thanks to its double rows of teeth. The ingenious design of these jigsaw blades means no further work is required after cutting – the teeth avoid tearing on both the up and downstrokes. This is perfect for professionals wanting to save time while providing the highest quality work for their clients. With its extra sharp precision-…

Irwin Jigsaw Metal Cutting Blades are made from fully hardened high speed steel for use in metal aluminum and no-ferrous metal. HSS milled teeth for a longer life and fast even cuts in metal. Stra more→ight cuts in metal non-ferrous metal aluminium 3-6 mm (1/8Inch -1/4in). Length: 92mm. Pitch: 20 Precise Cut. Supplied in a pack of 5.PTDIRW10504293

Sirius HCS (High Carbon Steel) half moon plunge cutting blade for oscillating multi tools. Ideal for cutting into wood and PVC. Specifications • Blade Type: HCS • Blade Diameter: 88mm • more→Ideal for: Wood, PVC • Quantity: 1 Features and Benefits • High Carbon Steel (HCS) blade • Suitable for a wide range of oscillating multi tools • Ideal for plunge cutting into wood and PVC