Revolt RH 20/26-2 (perf-0005)

The Raptor Short series Pilot Pins are compatible with Rotabroach RAPL broach cutters with a depth of 50mm and diameter of 13mm to 65mm.

The IRWIN Blue Groove 4X Flat Bits have a patented groove point and cutting edge, designed to cut and not scrape the timber. They are 4 times faster than standard flat bits. The parabolic scoop optimi more→ses control and removal of wood chips. Increased relief angle from 12 degrees to 17 degrees. The shank is 152mm in length and 10% larger in diameter for added durability. This IRWIN Blue Groove 4X Flat Bit Set is supplied in a hard, case. Contains the following: Sizes (dia): 12, 16, 18, 20, 22, 25, 28 and 32mm. Features: Patented Blue Groove point and cutting edge Parabolic scoop for optimised control Fast wood chip removal Increased shank diameter for durability IRW10502826, 6 Piece: 10-25mm in …

Fast Drilling-Accuracy - The Auger Bit is ideal for fast drilling-accuracy when producing through-holes, pre-drilling for rafter nails and drilling deep dowel holes in wood. The heavy-duty self-feedin more→g tip pulls the bit through completely, which allows for quick and effortless precision-drilling. Straight holes and a high chip removal rate and increased speed are made possible by the bit's optimised low-friction flute geometry with a solid centre. Its optimised scoring spur and precision-ground main cutting edge produce accurate holes. It is ideal for use in the ancillary building trades, for carpenters and roofers, and is suitable for soft and hard wood This drill bit has a hexagonal shank …

Fast Drilling in Metal - The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents more→wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. There is a low risk of breakage, especially for drill bits below …

• TCT Ultra 50 core bit with 3/4 in Weldon holder• Very long service life and outstanding cutting performance. Metric dimensions, cutting depth 50 mm.SpecificationsCutting depth: 50 mmBore Ø: 30 mm

This spade bit has a 1/4-inch hex shank system and it is best for use with portable power drills. The Self-Cut Speed Spade Bit performs extremely fast hole drilling. Its self-feeding threaded tip enab more→les the drill bit to effortlessly pull itself into the wood for high-speed drilling with little exertion. Fast chip removal for rapid results is made possible by the specially shaped spade. In product tests, this drill bit produces holes 10 times faster than a standard spade bit. It is suitable for use on soft and hard wood, light building materials and plasterboard. Total length 400 mm • Extremely Fast Holes • Self-Cut Speed Spade Bit performs extremely fast hole drilling • Self-feeding …

FatMax Bevel Edge Chisel with superior Thru Tang design handle for extra strength, reassurance and durability. The steel striking cap can be used with a steel hammer for increased force at the point o more→f contact. Quality chrome alloy (ball bearing grade) steel provides superior edge retention, and an ergonomic soft-grip handle offers maximum grip and control. With a full length blade guard for added safety. Features: Ergonomic, shatterproof, dual component polymer handle EN31 ball bearing grade steel Bevel edged with Thru Tang design For carving, cutting and removal of wood and timber Specifications: Dimensions: H:5.0 x W:34.0 x D:3.3 cm Colour: Multi Guarantee:1 year Material: Metal Model Number: …

The Pointed Chisel has a pointed tip for precise adjustment work in concrete. It is intended for use in concrete and brick for mortising, demolition and adjustment work, including restoring joints and more→clearing reinforcements. It is compatible with a 28 mm hex shank system for hammers. With 28 mm hex shank for breakers. Features and Benefits • Pointed Tip for Precise Adjustment Work in Concrete • Pointed Chisel has a pointed tip for precise adjustment work in concrete • Intended for use in concrete and brick for mortising, demolition and adjustment work Specifications Total length: 520mm Shank, shape: Hexagon Shank type: Hexagon

DeWalt 2 Piece SDS Max Chisel Set. Features & Benefits • Suitable for use in SDS plus hammer drills Specifications • Manufacturer Code: DT9000-QZ • Quantity: 2

Chisel Set / SDS Plus

Chisel Point / Hexagonal / Total Length 400 mm / Feed Opening 36 mm / Stone / 1 Piece

Easy Mortar Removal - The SDS max Toothed Chisel is equipped with special teeth to allow for the easy and effective removal of mortar and plaster. The chisel is also intended for use in concrete and b more→rick for tasks such as repointing bricks. It is compatible with SDS max shank systems. Fits all SDS max rotary hammer drills. Features and Benefits • Easy Removal of Mortar • SDS max Toothed Chisel provides easy removal of mortar and plaster • Equipped with special teeth for effective work progress Specifications Total length: 300mm Chisel cutting edge: 32mm Thickness: 6,5mm Thickness 2: 6,5mm Shank, shape: SDS max