Ronix 3100
Cutting Discs394
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Designed for cutting concrete and stone with angle grinders, these Stanley cutting discs have a depressed centre so the cutting edge is offset from the nut - this allows for better access in tight spa more→ces. Features and Benefits • Compatible with standard angle grinders • Depressed centre: prevents the nut from causing an obstruction and allows access in tight spaces Specifications • Disc Diameter: 115mm • Bore: 22mm • Thickness: 3mm • Pack Quantity: 5
 |
These long-lasting, high speed cutting discs from Bosch can be used to cut metal, inox, non-ferrous metals, stone, soft tiles, marble and plastics Features:
- ACS 60 V BF specification more→r />
- Straight cutting
- Cut virtually everything without disc changes
- For metal, inox, non-ferrous metals, stone, soft tiles, marble and plastics Specification:
- Diameter (mm): 115
- Bore diameter (mm): 22.23
- Thickness (mm): 1.0
- Qty: 1
- ACS 60 V BF specification
- Cut virtually everything without disc changes
- For metal, inox, non-ferrous metals, stone, soft tiles, marble and plastics Specification:
- Diameter (mm): 115
- Bore diameter (mm): 22.23
- Thickness (mm): 1.0
- Qty: 1
 |
The Makita flap disc 115mm zirconium 60 grit medium lasts ten times longer than conventional bonded abrasive discs, with no need for Abrasive Wheel instruction. High productivity and excellent finishF more→eatures and Benefits• Suitable for variety of materials: Ferrous, Non-Ferrous, Plastics, Woods etc. • Fibre Glass Backing is lightweight, flexible, and quiet, it is the most popular backing for flap discs.Specifica
 |
• Aluminium oxide flap discs for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• Pack contains four different levels of abrasion, for assorted applications and more→finishes.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require backing pad.• Depressed centre discs suitable for electric and air tools.Technical SpecificationBo
 |
Cuts Virtually Anything - The X-LOCK Multi Construction Cutting Disc cuts virtually anything without having to change discs. Made from a special abrasive mix, it enables working on various materials. more→In addition, the thin disc offers easy and fast cutting with little exertion of force, produces less noise and minimum dust and prevents blue discolouration or burr formation. X-LOCK cutting discs also fit standard angle grinders. Changing cutting discs is fast and convenient thanks to the keyless X-LOCK system. Click it on with X-LOCK – the fastest accessory-chang
 |
These Makita Tungsten Carbide Grit Blades for X-LOCK grinders are suitable for cutting a variety of materials including plaster board, PVC, FRP & copper. Supports the X-LOCK system which allows for sa more→fe and easy disc installation and removal. Specifications • Diameter: 115 mm • Fitting: X-LOCK • Thickness: 2mm • Pack Quantity: 1 Features & Benefits • Suitable for cutting a variety of materials including plaster board, PVC, FRP & copper • Supports the X-LOCK system which allows for safe and easy disc installation and removal
 |
• Zirconium flap discs for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• More durable than normal sanding discs.• Abrasive flaps are attached to rigid disc wi more→th epoxy adhesive - does not require backing pad.• Depressed centre discs suitable for electric and air tools.Technical SpecificationBo
Wire & Cup Brushes332
 |
Price from £29.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Knot Wheel Brush 115mm M14 Thread LES472217
The Lessmann Knot Wheel Brushes are for grinders, angle grinders and stationary machines, used in the preparation and re-working of bolt fillet and butt welds. They remove scale, rust, paint, slag, ru more→bber residue and can be used for de-burring. They are filled with a special high tensile strength steel wire in order to meet the exacting requirements during use.This Lessmann Knot Wheel Brush has the following specification: Diameter: 115mm.Width: 14mm.Bore: M14.Wire Gauge: 0.50.Wire Type: Steel.Max RPM: 12,500/min.Addi
 |
Price from £41.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Knot Cup Brush 100mm M14 x 2.0 Thread LES486217
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special s more→teel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Stability bridle fitted.Diameter
 |
Price from £30.95 up to £36.76
Compare prices6→Compare prices and buy Sealey Angled Wire Wheel Ø100mm for SA695
• Angled wire wheel for Model No. SA695 Smart Eraser Kit.Angled wire wheel for Model No. SA695 Smart Eraser Kit.• Angled wire wheel for Model No. SA695 Smart Eraser Kit. • Model No. SA695WATechnica
 |
Price from £24.99 up to £39.99
Compare prices6→Compare prices and buy Bosch Professional Clean Metal 100x0.5x180 Mm M14 Brush Cup 1608614011
Clean For Metal Wire Cup Brush Provides An Extra-Fine Surface Finish. Brush Wires Are Available In Different Thicknesses For Variable Levels Of Abrasive Needs. Thicker Wires Are More Aggressive, Produ more→cing A Coarser Yet Faster Surface Finish, While Thinner Wires Deliver Finer, Smoother Surface Results. It Is Intended For Use With Angle Grinders With An M14 Thread.Features
 |
Price from £13.95
Compare prices3→Compare prices and buy Lessmann 0.3 Steel Wire Cup Brush 40mm 6mm Shank LES434162
The Lessmann Cup Brush is fitted with 6mm shank and is ideal for working on medium to large areas. They are generally used for the removal of rust, paint, dirt or scale, and for polishing.Diame
 |
Price from £14.95 up to £19.99
Compare prices4→Compare prices and buy Faithfull Wire Cup Brush Knot 75Mm Xlock FAIWBT75XL
X-LOCK Twist Knot Wire Brush for heavy-duty applications. Ideal for removing rust, paint and varnish from steel surfaces. The X-LOCK quick change system ensures a fast, reliable and effective one clic more→k change between tools when used with a compatible angle grinder. Features: Use on steel X-LOCK quick change system for fast change between tools X-LOCK quick change system for fast change between tools 0.5mm twist knot steel wire Specifications: Dimensions: H:11.5 x W:6.0 x D:9.5 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBT75XL
 |
Price from £34.95
Compare prices3→Compare prices and buy Lessmann 0.5 Stainless Steel Wire Knot Cup Brush 65mm M14 x 2.0 Thread LES
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special s more→teel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Diameter. 65mm.Bore. M14.Wire Gauge. 0.50.Wire Type. Stainless.Max. R.P.M. 12,500.Addition
 |
Price from £7.49 up to £8.23
Compare prices6→Compare prices and buy Sealey Twist Knot Wire Cup Brush Ø65mm M10 x 1.25mm
• Suitable for use with power tools up to the maximum rated rpm.• Twisted steel filaments give more aggressive cleaning action - ideal for heavy rust removal.Suitabl
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
