Ronix 7108
Diamond Core Bits & Milling Cutters2277
 |
This thirty-piece cutter set contains a range of popular Tungsten Carbide Tipped cutters for a variety of applications. 1/4-inch shank diameter. For softwood, hardwood, chipboard, plywood and MDF. more→Excellent value for money. Set includes fifteen guided and fifteen unguided router cutters. Supplied in aluminium carry case. Specifications • Shank Diameter: 1/4 • Pack Qty: 30 piece Contents: 1 x Straight 5mm x 12mm cut 1 x Straight 6mm x 20mm cut 1 x Straight 8mm x 20mm cut 1 x Straight 10mm x 20mm cut 1 x Straight 12mm x 20mm cut 1 x Straight 14mm x 20mm cut 1 x Straight 16mm x 20mm cut 1 x Straight 18mm x 20mm cut 1 x Straight 20mm x 20mm cut 1 x 45 Degree v groove x 12.7mm dia …
 |
Trend Professional Specialist V' Groove cutter - For routing Alucobond and Dibond 13mm diameter X 10mm cutting depth 'V' Groove cutter designed for working with specialist composite cladding such as more→Alucobond and Dibond. Cuts a 'V' groove through the back face and inner insulation core for clean folds when cladding columns or turning corners. Leaves a 3mm flat profile at the base of the groove to ensure crisp 90¡ corners without splitting or deforming for a professional finish. 1/4in shank for use in smaller routers or CNC machines. With 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/4 • Dia Metric: 13 • Cut Length Metric: 10 • Overall L…
 |
For trimming the lipping of plastic overlay, and for rebating and machining wood, Duralium and plastics. Tungsten Carbide Tipped. Use at speed 12000 - 24000 RPM. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 18 • Cut Length Metric: 12 • Overall Length Metric: 45 • Angle: 90
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 13 • Dia Imperial: 33/64 • Cut Length Metric: 26 • Overall Length Metric: 72
 |
Drill, countersink, and counterbore in one step with the Stanley Countersinks. Built with sturdy materials, the STA62507 is a reliable companion, ready to tackle challenges in both workshop and job si more→te environments. Its ergonomic design prioritizes user comfort during extended use, providing a secure grip and precise control. From woodworking to various applications, this tool empowers you to achieve exceptional outcomes. Its versatility positions it as an indispensable asset for tackling a wide range of challenges. Features & Benefits • Complete two jobs in one • For use with STA62380-XJ Flip and Drive connector • For use in hard and soft wood, composite board and MDF Specifications …
 |
Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications • Shank Diameter: 1/2 • Dia Metric: 52 • Cut Length more→Metric: 25 • Overall Length Metric: 82 • Angle: 45
 |
Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/groo more→ving. A 3mm maximum overlap should be left before trimming. They are ideal for template making. Specifications • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 32 • Overall Length Metric: 90 • Bearing Dia Metric: 12.7
 |
Two flute. For trimming of laminate and solid lipping. 1.6mm deep 'V' groove to hide glue line. Specifications • Shank Diameter: 1/4 • Dia Metric: 16 • Dia2 Metric: 12.7 • Cut more→Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 67 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
