Ryobi R18TR-0 (5133002917)
Diamond Core Bits & Milling Cutters279
 |
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications • Cut Length Metric: 2.38 • Cut Length Imperial: 3/32 • Bearing Dia Metric: 4.8 • Bearing Dia Imperial: 3/16 • Sawbore: 2.38 • Sawbore Imperial: 3/32
 |
Trend HSS Two Flute Straight Cutters are made from a single piece of High Speed Steel ground with a very fine edge. Generally HSS cutters are slightly less expensive than their TC grades but can be more→more suitable for certain applications. Suitable for general grooving and rebating. Suitable for non abrasive materials but will give a superior finish in soft timbers. Specification D: 6.3mm (1/4in)C: 28mmOL: 59mmShank Diameter: 1/4inPTDTRE3211
 |
High quality 1-flute countersink bit by Wera. For countersinking and deburring. The hexagon shaft ensures very good power transfer, vibration-free and score-free working. Perfect chip removal and long more→service life. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits • Hex shaft for very good power transfer • Vibration-free and scratch-free operation ensured • Best surface quality of the countersink • Long service life • Perfect chip removal Contents 845 1-flute Countersink Bits, 10.40 x 34 mm
 |
1/4 Straight 3 x 11mm TCT Router BitPTDDRPDIR75330"
 |
Heavy duty countersink bit made from high speed steel hardened and tempered to 55HRC for longer life. The 90° head incorporates five cutting edges and an 8mm diameter shank. Suitable for use with han more→d or power drills on hard or softwood metals and plastics.PTDDRP
 |
The IRWIN® Hex Countersink drills countersinks and counter bores in one step. Its 4-cutter countersink and tapered drill bit provide superior speed and ideal finish. Ideal for both soft and hard more→woods.1 x IRWIN® Hex Countersink 16mm.PTDIRWIW30
 |
Clarkson 02PM/04PM long series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 3.0mm - 20.0mm: Four Flutes Sizes 22.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eight F more→lutes BS 122/4. Specifications • Milling Diameter: 10mm • Shank Diameter: 10mm • Length of Cut: 37mm • Overall Length: 82.5mm • Square End Helix Angle: 30° Features and Benefits • Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectiona
 |
The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen craftsmen and conscientious DIY enthusiasts. Every Faithfull rou more→ter cutter tip is made from tungsten carbide brazed onto a steel body and designed to cut a wide variety of timber and abrasive material such as MDF and plywood. With careful handling and under normal conditions they will outlast HSS grade cutters many times. These top quality cutters will ensure an excellent finish and provide the user with long lasting and reliable service. 1/4in ShankCutting Diameter: 10.0 mm 3/8in. Cutting Length: 19 mm. Shank Diameter: 1/4in.PTDFAIRB2
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
