Ryobi RAG750-115G (5133002489)
Cutting Discs314
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
You can expect reliable performance, fast accessory changes and neat cuts with these Bosch cutting discsX-LOCK cutting discs also fit standard angle grindersThe Bosch 2608619266 cutting discs deliver more→reliable performance in Inox. These revolutionary quick change discs make accessories changes fast and convenient thanks to the keyless X-LOCK system. They are extremely durable and long lasting.Feature
- Reliable performance in Inox
- Thin disc edge supports smooth and easy cutting
- The disc is free from ferrous, sulphurous and chlorinated fillers
- Bosch cutting discs comply with the maximum safety requirements, such as EN 12413
- Changing cutting discs is fast and convenient thanks to
- Reliable performance in Inox
- Thin disc edge supports smooth and easy cutting
- The disc is free from ferrous, sulphurous and chlorinated fillers
- Bosch cutting discs comply with the maximum safety requirements, such as EN 12413
- Changing cutting discs is fast and convenient thanks to
 |
The Marcrist BF850 AkkuMAX Turbo Diamond Blade is a high-performanc
 |
These Makita Type 41 Pro Cutting discs are designed for fast clean cutting and are particularly suitable for use with cordless angle grinders for around 40% longer battery life over a standard cutting more→wheel. They are manufactured from high quality bonded 60G aluminium oxide for long life and are suitable for cutting steel and stainless steel. Please note generic stock image shown for illustration purposes only. Refer to the description for the specifications. Specifications • Diameter: 115mm • Thickness: 1.2mm • Bore: 22.23mm Contents • 10 Discs
 |
The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into more→place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock diamond cutting discs are suitable for cutting concrete, granite and marble. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in seconds …
 |
This premium-quality resin bonded zirconium oxide flap disc offers enhanced cutting performance and efficiency. It has a self-sharpening feature which increases high stock removal and durability. The more→strong plastic backing allows increased flexibility and fast cutting action on medium to high pressure applications. The M14 connection allows for the quick changing of discs. The plastic backing can be trimmed to extend service life. Designed for contoured and flat-edged surfaces. Ideal for sanding, grinding, removing rust and weld preparation of metal, carbon steel, stainless steel, sheet metal, wood and plastic. Compatible with 115mm angle grinders including Stock No. 56488.
 |
Cuts materials that angle grinders previously couldn’t - Professionals value angle grinders for their ability to cut tough materials like concrete, stone and metal. With the EXPERT Carbide Multi Wheel more→this wonderful tool can be even more versatile, efficiently cutting all kinds of softer materials such as wood, plastic and modern composites. The EXPERT Carbide Multi Wheel uses sharp carbide grits on its rim to cut multiple materials extremely effectively. The grits are joined to a steel body by a laser technique for an extra strong bond, giving a safe and reliable cutting disc that maintains a constant speed and depth throughout a long lifespan. With the EXPERT Carbide Multi Wheel, your angle gr…
 |
• General-purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools.• Pack of 50.General-purp
Wire & Cup Brushes281
 |
Price from £15.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Knot Cup Brush 65mm M14 x 2.0 Thread LES482217
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special s more→teel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Diameter. 65mm.Bore. M14.Wire Gauge. 0.50. Wire Type. Steel.Max. R.P.M. 12,500.Addition
 |
Price from £6.95 up to £8.40
Compare prices4→Compare prices and buy Sealey Wire Brush Set 8pc Brassed
• Suitable for use with power tools up to the maximum rated speed (4500rpm).• Shaft: ø6mm.• Contents: Brushes; Flat Wire ø25mm (x1), ø40mm (x1), ø50mm (x1), ø65mm (x1), ø more→75mm (x1), Removable Shafts (x3).• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power tools up to the maximum rated rpm. Crimped brassed steel filaments add extra rigidity and cleaning power. Contents: Brushes; Flat Wire ø25mm (x1), ø40mm (x1), ø50mm (x1), ø65mm(x1), ø75mm (x1), Removable Shafts (x3).• Suitable for use with power tools up to the maximum rated speed (4500rpm). • Shaft: ø6mm. • Contents: Brushes; Flat Wire …
 |
Price from £5.69 up to £7.28
Compare prices6→Compare prices and buy Draper Crimped Wire Cup Brush, 60mm, M14
Manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. M14 thread. Display packed.
 |
Price from £17.95 up to £22.99
Compare prices4→Compare prices and buy Faithfull Wire Conical Brush 115Mm Xlock Ss FAIWBCTSSXL
X-LOCK Conical Wire Brush for heavy-duty applications. Twist knot brushes are suitable for the removal of slag, rust, scale or even dried cement from welds, edges and grooves. For use on stainless ste more→el surfaces, aluminium and non-ferrous metal surfaces. Using standard wire brushes on stainless steel can contaminate and cause the material to rust. The X-LOCK quick change system ensures a fast, reliable and effective one click change between tools when used with a compatible angle grinder. Features: X-LOCK quick change system for fast change between tools 0.5mm twist knot stainless steel wire (304) 0.5mm twist knot stainless steel wire (304) Use with stainless steel, aluminium and non-ferrous …
 |
Price from £3.00 up to £3.71
Compare prices5→Compare prices and buy Draper Flat Top Decarbonizing Wire Brush, 26m
Brassed crimped steel wire brush with flat trim. 6mm diameter shanks. Brush length 25mm. Display packed.
 |
Price from £19.95
Compare prices4→Compare prices and buy Bosch X Lock Stainless Steel Knotted Wire Wheel 115mm X-Lock 2608620733
Aggressive Cleaning on Inox - The X-LOCK Heavy for Inox Wire Wheel provides an aggressive cleaning performance. It is fitted with knotted wire for heavy-duty cleaning applications of small Inox surfac more→es. It is suitable for use with X-LOCK angle grinders. Changing brushes is fast and convenient thanks to the keyless X-LOCK system. Click it on with X-LOCK – the fastest accessory-chang
 |
Price from £24.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Knot Wheel Brush 125mm 22.2mm Bore LES473211
The Lessmann Knot Wheel Brushes are for grinders, angle grinders and stationary machines, used in the preparation and re-working of bolt fillet and butt welds. They remove scale, rust, paint, slag, ru more→bber residue and can be used for de-burring. They are filled with a special high tensile strength steel wire in order to meet the exacting requirements during use.This Lessmann Knot Wheel Brush has the following specification: Diameter: 125mm.Width: 14mm.Bore: 22.2mm.Wire Gauge: 0.50.Wire Type: Steel.Max RPM: 12,500/min.Addi
 |
Price from £20.95 up to £24.99
Compare prices4→Compare prices and buy Faithfull Wire Cup Brush Knot 75Mm Xlock Ss FAIWBT75SSXL
X-LOCK Twist Knot Wire Brush for heavy-duty applications. Ideal for removing rust, paint and varnish. Use on stainless steel, aluminium and non-ferrous metal surfaces. Using standard wire brushes on s more→tainless steel can contaminate and cause the material to rust. The X-LOCK quick change system ensures a fast, reliable and effective one click change between tools when used with a compatible angle grinder. Wire Type: High Tensile Twisted Stainless Steel (304)Diameter: 75mmFitting: X-LOCKWire Size: 0.5mmMax. RPM: 12500 Features: Use on stainless steel, aluminium and non-ferrous metal X-LOCK quick change system for fast change between tools X-LOCK quick change system for fast change between tools …
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
