Skil 1860 AA
Diamond Core Bits & Milling Cutters1651
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 19 • Overall Length Metric: 59
 |
Ideal for producing nosings and attractive edges. Specifications • Shank Diameter: 1/2 • Dia Metric: 35.2 • Cut Length Metric: 35 • Overall Length Metric: 83 • Bearing Dia Me more→tric: 16 • Radius 1 Metric: 9.5
 |
Trend Professional 1/2in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work 12.7mm diameter X 25mm cutting length bearing guided trimmer for bringing decorative lam more→inates and veneers flush to an edge or for templating work. Two flute TCT tips, Ideal for worktop fitting for flush trimming edging laminates for a professional finish. Bearing guide can be used with templates, ideal for pattern making or replicating components. 1/2in shank for heavier work, ideal for router table work with the template below the workpiece. K mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 …
 |
Manufactured from a Cobalt-based HSS (M42), a premium grade high speed tool steel, heat treated to surpass the hardness of other HSS materials. The increased cobalt content helps retain hardness at el more→evated temperatures. This increased hot hardness makes the material especially suited for machining stainless steels and temperature resistant alloys. It also gives the material increased wear resistance needed for machining in highly abrasive cutting applications. M42 is also a very tough grade and can therefore cope with the most aggressive applications in most materials. The Aluminium Titanium Carbo-Nitride (AlTiCN) multilayer coating has a hardness of 3700HV which surpasses many other nitride …
 |
A range of heavy duty 'T' slot cutters for clamping and hanging applications. MEC mechanical feed only. Specifications • Shank Diameter: 3/8 • Dia Metric: 28 • Dia2 Metric: 11.2 &bull more→; Cut Length Metric: 4 • Overall Length Metric: 52 • Radius 1 Metric: 2
 |
A quarter ellipse cutter for architraves and hand rails. Can be used to form the top portion of handrail moulding when used in conjunction with Ref. 93/3. Specifications • Shank Diameter: 1/2 more→• Dia Metric: 69.2 • Cut Length Metric: 16 • Overall Length Metric: 76 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 44
 |
Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. S more→pecifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 19 • Overall Length Metric: 51
 |
These cutters are for Trend Craft Dovetail Jigs. Specifications • Shank Diameter: 8 mm • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 25 • Overall Length Metric: more→65 • Angle: 97
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
