Stavr MF-12/1800
Diamond Core Bits & Milling Cutters1895
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/2 • Dia Metric: 7 more→• Dia Imperial: 9/32 • Cut Length Metric: 19 • Overall Length Metric: 63
 |
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised P more→anel cutters run best at lower speeds and match our range of profile scribers. All are suitable for use on natural timber and MDF. 8mm hank tools are for use with medium and heavy duty routers only. Suitable for use with Ref. PSC/2. Specifications • Shank Diameter: 1/2 • Dia Metric: 85.7 • Cut Length Metric: 15.9 • Overall Length Metric: 75 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 22.2
 |
The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Specifications • Shank Diameter: 1/2 • Dia Metric: 27 • Cut Length Metric more→: 17 • Overall Length Metric: 65.6 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 17
 |
Having two tungsten carbide cutting edges, these cutters are suitable for professional use. This cutter is ideal for fast cutting applications on MDF, softwoods, hardwoods and plywood. Shank: 1/4in. F more→eatures: For grooving, rebating and mortising TCT TCT Specifications: Dimensions: H:15.0 x W:2.5 x D:5.5 cm Colour: Multi Guarantee:5 years Material: Tungsten Carbide Model Number: FAIRB231
 |
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications • Shank Diameter: 1/2 • Dia Metric: 57.1 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 79 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 22.2 • Radius 1 Imperial: 7/8
 |
Alternative bearing B127A removes the lower quirk. Specifications • Shank Diameter: 1/4 • Dia Metric: 34.9 • Cut Length Metric: 17.5 • Cut Length Imperial: 11/16 • Overall Le more→ngth Metric: 69 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 6.3 • Radius 2 Metric: 4.8
 |
The CoroMill 331 is a versatile, high-performanc
 |
Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving rebating morticing drilling and shallow lateral routing cuts such as recessing hinges. Co more→rners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics.The Trend 3/83M x 1/2 TCT Two Flute Cutter has a short shank suitable for Makita 3600B & 3612BR Ryobi and Hitachi routers. Ideal for cutting kitchen worktops. It has the following specification: Cutting Diameter: 12.7mmCutting Depth: 50.0mmOverall Length: 84mmShank Diameter: 1/2inPTDTRE383M
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
