Stern AG-125B
Cutting Discs220
 |
Up to 3x more precise than a standard ceramic diamond discThe tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore crucia more→l yet difficult. The Expert HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics.Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut.The Bosch Expert …
 |
Flexovit Flap Discs are ideal for sanding contoured metal surfaces, blending welds, deburring and finishing castings. The angles of the flaps mean more abrasive makes contact with the workpiece than a more→conventional fibre disc which increases productivity. Suitable for use on Metal, wood and paint.Size: 125mm Bore: 22mmGrit: 80Additional Information:&bu
 |
Bosch 2608603255 Standard for Inox Rapido Straight Cutting Discs 125mm (Box of 10) The Bosch 2608603255 is a pack of 10, WA 60 T BF Standard for Inox Cutting Discs measuring 125mm in diameter in a tin more→. The disc is made of aluminium oxide specifically designed for use with Inox. It is free of ferrous, sulphurous and chlorinated fillers. Use this disc for cutting Inox. It is compatible with Bosch angle grinders. Features:
- An aluminium oxide disc specifically designed for use on Inox
- Free of ferrous, sulphurous and chlorinated fillers
- The Standard for Inox Cutting Disc is a reliable choice for working on Inox
- Bosch cutting discs comply with the maximum safety requirements, such &he
- An aluminium oxide disc specifically designed for use on Inox
- Free of ferrous, sulphurous and chlorinated fillers
- The Standard for Inox Cutting Disc is a reliable choice for working on Inox
- Bosch cutting discs comply with the maximum safety requirements, such &he
 |
DeWalt Extreme Diamond metal cutting discs are intended as a direct replacement for bonded abrasive cutting discs. They are suitable for use on steel, stainless steel, cast iron, rebar, sheet metal, a more→luminium and non-ferrous metals. Specifications • Diameter: 125 mm • Thickness: 1.3 mm • Bore Size: 22.23 mmFeatures & Benefits• Economical: 1000+ cuts can be achieved with one disc • Increased safety: solid steel body greatly reduces risk of disc breakage • No shelf life: does not deteroriate over time (in proper storage conditions) • Diameter retention: each disc maintains its original diameter until the last cut • Less dust: substantial reduction in airborne …
 |
The X571 Best for Metal is compatible with angle grinders. The X571 Best for Metal has an excellent lifetime when grinding welding seams and coarse sanding metal surfaces. Its high-quality zirconia al more→umina/semi-fria
 |
The Standard for Stone Diamond Cutting Disc provides reliable cuts in all types of stone. Its optimised diamond matrix delivers solid results thanks to the disc's high-quality standards that are ensur more→ed by the Bosch diamond competence centre in Switzerland. Use this disc for cutting all sorts of stones. Pack of 1 • Reliable Cuts in All Types of Stone • Standard for Stone Diamond Cutting Disc provides reliable cuts in all types of stone • Optimised diamond matrix delivers solid results • High-quality standards are ensured by Bosch diamond competence centre in Switzerland Specifications: Diameter mm: 125 Bore diameter mm: 22.23 Cutting width mm: 1,6 Segment height mm: 10 …
 |
The X-LOCK Expert for Inox and Metal Cutting Disc delivers powerful cutting performance in Inox and metal with maximum safety. The disc is made of premium aluminium oxide with functional fillers and a more→dditives to reduce heat generated while cutting. This produces good quality surface results and assures a long disc-performanc
 |
Greater precision: The Activteq centring tip enables active cutting in concrete and a precise hole diameter
Minimising strain: Reduced vibration thanks to AWB brazing and hardening technology < more→br /> Smooth operation: Toothed carbide metal plate for easier penetration of the material without sticking
For use in masonry, concrete and reinforced concrete
Made in Switzerland
Minimising strain: Reduced vibration thanks to AWB brazing and hardening technology < more→br /> Smooth operation: Toothed carbide metal plate for easier penetration of the material without sticking
For use in masonry, concrete and reinforced concrete
Made in Switzerland
Wire & Cup Brushes206
 |
Price from £6.93 up to £8.95
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Inox Steel Wire Brush 60mm 6mm Shank 2608622118
The Wire Cup Brush delivers an excellent, fine-surface finish. It features crimped wire for light-to-medium
 |
Price from £4.49 up to £5.77
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Ø100mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB100Technical Specification:D
 |
Price from £4.95
Compare prices4→Compare prices and buy Stanley Crimped Steel Wire Wheel Brush 50mm 6mm Shank STA36020
These Stanley crimped wire wheels are ideal for cleaning and preparing surfaces. They are designed for use in drill chucks and can be used with standard corded or cordless drills. The high tensile ste more→el wire is heat treated for durability. An innovative internal holding plate construction helps to reduce wire movement for increased control and longer product lifetime. Features & Benefits • For use with electric drills • Suitable for corded and cordless machines • Ideal for cleaning and surface preparation Specifications • Wheel Diameter: 50mm • Wheel Thickness: 10mm • Shank Diameter: 6mm
 |
Price from £4.95 up to £5.85
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Stainless Steel 75mm with 6mm Shaft
• Flat wire brush.• Crimped stainless steel filaments.• Shaft: ø6mm.• Diameter: ø75mm.• Maximum Speed: 4500rpm.Flat wire brush with crimped stainless steel filaments, 75mm width and a 6mm sh more→aft.• Flat wire brush. • Crimped stainless steel filaments. • Shaft: ø6mm. • Diameter: ø75mm. • Maximum Speed: 4500rpm. • Model No. SFBS75Technical Specification:D
 |
Price from £2.95 up to £4.44
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Ø50mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB50Technical Specification:D
 |
Price from £17.49 up to £20.95
Compare prices6→Compare prices and buy Bosch Professional X-lock Heavy Inox 75x0.5x125 Mm Brush Cup Silver 260862
X-Lock Heavy For Inox Cup Brush, Knotted WireFeatures:- It Is Suitable For Use With X-Lock Angle Grinders.- X-Lock Heavy For Inox Cup Brush, Knotted Wire Provides An Aggressive Cleaning Performance- K more→notted Wire For Heavy-Duty Cleaning Applications On Medium-To-Large Surfaces- Ideal For Removing Heavy Rust, Paint Or Varnish On Stainless Steel, Aluminium And Non-Ferrous Metal Surfaces- Click It On With X-Lock – The Fastest Accessory-Chang
 |
Price from £3.64 up to £5.68
Compare prices6→Compare prices and buy Draper Hollow Cup Wire Brush, 75mm
Brassed crimped steel wire with 6mm diameter shank. Display packed.
 |
Price from £6.95 up to £7.75
Compare prices4→Compare prices and buy Sealey Wire Brush Set 8pc Brassed
• Suitable for use with power tools up to the maximum rated speed (4500rpm).• Shaft: ø6mm.• Contents: Brushes; Flat Wire ø25mm (x1), ø40mm (x1), ø50mm (x1), ø65mm (x1), ø more→75mm (x1), Removable Shafts (x3).• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power tools up to the maximum rated rpm. Crimped brassed steel filaments add extra rigidity and cleaning power. Contents: Brushes; Flat Wire ø25mm (x1), ø40mm (x1), ø50mm (x1), ø65mm(x1), ø75mm (x1), Removable Shafts (x3).• Suitable for use with power tools up to the maximum rated speed (4500rpm). • Shaft: ø6mm. • Contents: Brushes; Flat Wire …
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
