Sturm ER1120PC
Diamond Core Bits & Milling Cutters83
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 20 • Dia Imperial: 25/32 • Cut Length Metric: 25 • Overall Length Metric: 66
 |
Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutter breakage. Specifications • Shank Diameter: more→8 mm • Dia Metric: 16 • Dia Imperial: 5/8 • Cut Length Metric: 19 • Cut Length Imperial: 3/4 • Overall Length Metric: 65 • Bearing Dia Metric: 19 • Bearing Dia Imperial: 3/4 • Angle: 90
 |
139.99Buy!
£
£
Zoro.co.uk
Delivery: in United Kingdom
Report
A Six piece premium grade cuttter set with a 50mm cutting depth includes 12, 14, 16, 18, 20 and 22mm cutters and pilot pin in a plastic case. Features and Benefits: Cutters are heat treated up to 68 more→RC and retain tempered hardness without brittleness They cut more holes per sharpening than comparable M2 or Cobalt cutters. Accurate, symmetrical, fine finish hole cutting capabilities Reduced friction between the HSS core drill and the material Time and energy savings Typical Applications: The ideal choice for all your magnetic drilling & cutting applications. Designed for use in fabrication, construction, railways, petrochemical and any other applications when drilling ferrous metal,…
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 19 • Overall Length Metric: 59
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 55
 |
The DeWalt four cutter countersink provides a clean, professional finish. They are ideal for drilling pilot holes and countersinking in one action and can be used on hard and soft wood, composite boar more→d and MDF. Features & Benefits • Four cutter countersink and tapered drill bit provide superior speed and ideal finish • Replacement tapered bits offered • Can be used on hard and soft wood, composite board and MDF Specifications • Accessory type: No. 8 Pilot Bit and No. 4 Countersink Cutter • Shank: 5/16"
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 32 • Overall Length Metric: 76
 |
Drilling and Countersinking in One Step - The Brad Point Drill Bit with Countersink efficiently drills, countersinks and deburrs in one step in wood. Mounted on a brad point drill bit, all three opera more→tions are achievable at once. The countersink is suitable for use on hard and soft wood, laminated and non-laminated chipboard and plywood. It is intended for use in drill stands and drill drivers. This multi-functiona
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
