Sturm RH2532V

The Irwin Metric TCT (Tungsten Carbide Tipped) Drill Bits offer precision drilling with stationary machines in hardened steel, cast iron, bronze alloys and manganese alloyed steel. The C2 Carbide Tip more→will drill hardened material up to a hardness of 50 Rockwell C and is four facetted ground for low drilling pressure and perfect centring. The body of the drill bit is made from Chrome Vanadium Steel, hardened to 56 Rockwell C. A coolant should always be used when drilling with TCT twist drill bits. Irwin suggest the use of a 3- 6% emulsion. The coolant will extend the lifetime of the drill bit.Irwin HSS TCT tip drill bit. Specifications:Diameter: 5.5mm.Total length: 93mm.Working Length: 57mm.

Under Armour M's Ch. Pro quarter Zip

EXPERT SDS max-8X Hammer Drill Bit 28 x 800 x 920 mm.Drilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits.Even 4-cutters wear out fast, resu more→lting in downtime changing accessories and fetching supplies.The Full Carbide Head on the EXPERT SDS max-8X is an advanced 4-cutter design made from a single piece of the toughest metal:It doesn´t jam and presents no weakness on impact.Features:Thanks to Bosch Carbide Technology and the Full Carbide Head, the EXPERT SDS max-8X lasts far longer than regular hammer drill bits.It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction p…

Rotabroach Raptor cutters have a unique geometry designed to offer fast cutting, long life, and dependable accuracy and finish. Features & Benefits • Raptor cutters have a unique and exclusive ge more→ometry that you will only find on genuine Rotabroach cutters • Manufactured from M2AL material. Heat treated to a higher temperature, for greater hardness • Designed to ensure that they will last longer, cut faster and give a better and more accurate finished hole than any other annular cutter Specifications • Diameter: 34mm • Length: 25mm • Max. Tensile Strength: < 900N/mm² • Ideal For: Mild & Structural Steel • 19mm / 3/4" Weldon Shank

The Dormer A130 HSS Morse Taper Shank Drill Bit is an essential tool for heavy-duty drilling applications. Engineered from high-speed steel, this drill bit delivers exceptional durability and performa more→nce, ensuring reliable and precise drilling in a variety of materials. Featuring a Morse taper shank, the A130 drill bit provides secure and stable mounting in machine spindles, minimising slippage and enhancing drilling accuracy. This design is particularly suitable for use in lathes, milling machines, and drill presses, making it ideal for both professional and industrial environments. Features & Benefits • High speed steel construction for superior durability • Steam tempered • …

Suitable for drilling steel, cast steel, alloyed and unalloyed, grey cast iron, spheroidal iron, sintered powder metal, German silver and graphite. Manufactured to BS328/DIN338RN. Black Finish (W-Fin more→ish) This is the most common surface finish and is the result of a steam tempering operation in which steam is passed over the product during a controlled tempering cycle, producing a black oxide layer. Black tools are generally recommended for ferrous applications where the oxide layer aids chip flow, helps to dissipate heat by retaining some coolant on the tool surface and also helps to prevent the tool from staining.

Firmer chisel set, 6pcs., short length, light pattern, bevelled edges, with flat hornbeam handle in display box.Specifications:Equipment: - Material Handle: Hornbeam- Bevelled Edge: Yes- Quantity: 6- more→Sizes: 6, 10, 12, 16, 20, 26 mm

This corner chisel is used for knocking out rounded corners from a routed hinge recess. Hit once with a mallet and pare out waste. Features: Spring-loaded, aluminium-bodied corner jig High quality tun more→gsten steel Useful for woodworking and general DIY Specifications: Dimensions: H:2.0 x W:3.0 x D:8.0 cm Colour: Red Material: Metal Model Number: CC70

DEWALT 28mm Hex shank 30kg Steel Clay Spade fully hardened steel body delivers increased life and durability. Micro-processor controlled heat treatment for consistently tough, long-life chisels.

The Sds Plus Flat Chisel Offers A 30%-Longer Lifetime And A 15%-Higher Material Removal Rate Than Standard Chisels.It Is Compatible With An Sds Plus Chisel Attachment Or It Can Be Used Directly In Sds more→Plus Hammers With A Rotation Stop.Features: - Self-Sharpening Spade Body Retains A Uniform Thickness Throughout Its Lifetime For Consistently Elevated Work Progress- Self-Sharpening With A 30%-Higher Material Removal Rate Than Standard Chisels- Fits All Sds Plus Rotary Hammer Drills.Specifications: - Solid Brick- Mortar- Total Length Mm: 250- Chisel Cutting Edge Mm: 40- Shank, Shape: Sds Plus

The Sds Max Pointed Chisel Delivers Standard Chiselling For Various Demolition Applications. Its Pointed Tip Makes Precise Adjustment Work In Concrete Possible. The Chisel Is Intended For Use In Concr more→ete And Brick, Including Mortising, Demolition And Adjustment Work, In Addition To Restoring Joints And Clearing Reinforcements. It Is Compatible With Sds Max Shank Systems.Specifications: - Length: 600 Mm

Irwin Speed Hammer Spade chisels for use with SDS Max machines. Suitable for a wide range of applications: breaking through, breaking up concrete, light demolition work and chasing of channels for pip more→es and electrical conduit. Suitable for use on concrete and masonry and are supplied in a grey sandblasted professional finish.The IRW10502190 Speedhammer Max Chisel Spade has the following dimensions:Width: 115mmLength: 350mm