Tesla Weld 125M
Cutting Discs238
 |
These Makita Tungsten Carbide Grit Blades for X-LOCK grinders are suitable for cutting a variety of materials including plaster board, PVC, FRP & copper. Supports the X-LOCK system which allows for sa more→fe and easy disc installation and removal. Specifications • Diameter: 125 mm • Fitting: X-LOCK • Thickness: 2mm • Pack Quantity: 1 • TC Grit: 30/40 Features & Benefits • Suitable for cutting a variety of materials including plaster board, PVC, FRP & copper • Supports the X-LOCK system which allows for safe and easy disc installation and removal
 |
The Expert for Concrete High Speed Diamond Grinding Head ensures the fastest work results in concrete. Its aggressive double row of 9 segments minimises extra work. Designed with large holes located c more→lose to the head's edge, it removes dust immediately for rapid progress when grinding. The grinding head's high level of balance ensures vibration-contr
 |
It is suitable for use with hand-held angle grinders. The Expert for Metal Grinding Disc delivers an impressively long lifetime on metal with maximum safety. Its premium aluminium oxide abrasive grain more→, selected functional fillers and additives in a modern phenol resin bond matrix are particularly suited for metal applications. Furthermore, its precision-manuf
 |
Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in s more→tock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear …
 |
The X571 Best for Metal is compatible with angle grinders. The X571 Best for Metal has an excellent lifetime when grinding welding seams and coarse sanding metal surfaces. Its high-quality zirconia al more→umina/semi-fria
 |
The standard for stone cutting disc cuts reliably in stone. It features a good silicon carbide and resin blade specifically designed for work on stone. The product is intended for work on stone. For u more→se with Bosch angle grinders. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413.Straight&
 |
The X-LOCK Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building materials. Its optimised diamond matrix delivers solid results thanks to the disc's high-quality sta more→ndards. Bosch's diamond competence centre in Switzerland ensures these standards by enabling consistent quality time and again. Use this disc for cutting building materials such as concrete and masonry. Changing cutting discs is fast and convenient thanks to the keyless X-LOCK system. X-LOCK cutting discs also fit standard angle grinders. Pack of 1 • Reliable Cuts in Universal Building Materials • X-LOCK Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building …
 |
These Makita Type 41 Pro Cutting discs are designed for fast clean cutting and are particularly suitable for use with cordless angle grinders for around 40% longer battery life over a standard cutting more→wheel. They are manufactured from high quality bonded 60G aluminium oxide for long life and are suitable for cutting steel and stainless steel. Please note generic stock image shown for illustration purposes only. Refer to the description for the specifications. Specifications • Diameter: 125mm • Thickness: 1.2mm • Bore: 22.23mmContents
Wire & Cup Brushes213
 |
Price from £3.00 up to £4.54
Compare prices5→Compare prices and buy Draper Flat Top Decarbonising Wire Brush 26mm 6mm Shank 41438
This wire end brush is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The bristles are made from hardened dipped brassed steel wire, which giv more→es a high level of durability and resistance to oxidation. The brush is strong enough to provide reliable performance, and the crimping is flexible to tackle recessed areas and irregular surfaces. Its size makes it highly suitable for smaller areas that might otherwise be hard to reach, such as removing rust from water pipes. Fitted with a non-slip 6.35mm hex shank. Compatible with most drill drivers and drills with a 13mm chuck. Conforms to EN1083-1 and EN1083-2 Contents: 1 x Brassed Steel Crimped …
 |
Price from £2.49
Compare prices3→Compare prices and buy Faithfull Flat End Crimped Wire Brush 12mm 6mm Shank WBSI12
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12 Wire End Brush has the following specifications: Type: Flat End. Face diameter: 12 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel.Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £7.49
Compare prices4→Compare prices and buy Bosch 0.3mm Crimped Inox Steel Wire Pencil Brush 25mm 6mm Shank 2608622127
The Pencil Brush provides a good fine surface finish. It is fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces. Due to its shape, the pencil brush is ideal for more→cleaning work in very hard-to-reach areas on stainless steel, aluminium and non-ferrous metal surfaces as well as in corners and the inside of pipes and profiles. It is also suitable for removing rust, roughing, matt sanding and paint stripping. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use …
 |
Price from £3.49 up to £4.51
Compare prices4→Compare prices and buy Sealey Flat Top Brassed Decarbonising Brush 24mm 6mm Shank VS1803
Flat trimmed brush with brassed and crimped filaments for extra rigidity. Ø6 x 26mm Shaft. Features & Benefits: • Flat trimmed brush with brassed and crimped filaments for extra rigidity. • Ø6 x 26mm more→Shaft. • Trim Length/Diameter
 |
Price from £4.49 up to £5.58
Compare prices5→Compare prices and buy Sealey Brassed Steel Wire Cup Brush 75mm 6mm Shank
Suitable for use with power drills. Ø6mm Shaft. Crimped brassed steel filaments add extra rigidity and cleaning power. Features & Benefits: • Suitable for use with power drills. • Ø6mm Shaft. • Crimp more→ed brassed steel filaments add extra rigidity and cleaning power. • Model No. SCB75 Specifications: Model No SCB75 Brand: Sealey Diameter: 75mm Maximum Speed: 4500rpm Nett Weight: 0.13kg Shaft Diameter: Ø6mm
Price from £6.95
Compare prices4→Compare prices and buy Stanley Crimped Steel Wire Cup Brush 25mm 6mm Shank STA36025
Designed for use with electric drills, this Stanley crimped wire brush is ideal for removing light rust and for general surface preparation tasks on metal. Features & Benefits • Crimped steel wir more→es • Less aggressive than twist knot brushes • Suitable for various metal preparation tasks • Designed for use in a standard electric drill Specifications • Diameter: 25mm • Pack Quantity: 1
 |
Price from £3.49 up to £4.89
Compare prices4→Compare prices and buy Sealey Flat Wire Brush 75mm 6mm Shank SFB75
Suitable for use with power drills. Ø6mm Shaft. Crimped brassed steel filaments add extra rigidity and cleaning power. Features & Benefits: • Suitable for use with power drills. Ø6mm Shaft. • Crimped more→brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB75 Specifications: Model No SFB75 Brand: Sealey Diameter: Ø75mm Maximum Speed: 4500rpm Nett Weight: 0.08kg Shaft Diameter: Ø6mm
 |
7.76Buy!
£
£
Electricalworld.com
Delivery: in United Kingdom
Report
• Suitable for use with power tools up to the maximum rated speed (4500rpm).• Shaft: ø6mm.• Contents: Brushes; ø50mm Wire Cup, ø50mm Flat Wire, ø25mm Decarbonising/C
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
