Tex-AC TA-01-422
Cutting Discs239
 |
DeWalt Extreme Diamond metal cutting discs are intended as a direct replacement for bonded abrasive cutting discs. They are suitable for use on steel, stainless steel, cast iron, rebar, sheet metal, a more→luminium and non-ferrous metals. Specifications • Diameter: 125 mm • Thickness: 1.3 mm • Bore Size: 22.23 mmFeatures & Benefits• Economical: 1000+ cuts can be achieved with one disc • Increased safety: solid steel body greatly reduces risk of disc breakage • No shelf life: does not deteroriate over time (in proper storage conditions) • Diameter retention: each disc maintains its original diameter until the last cut • Less dust: substantial reduction in airborne …
 |
The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into more→place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock cutting discs can be used in standard angle grinders as well as X Lock machines. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in …
 |
The Standard for Metal Cutting Disc cuts reliably through metal. Its aluminium oxide disc is designed for general use with metal. Use this disc for cutting metal. Bosch cutting discs comply with the m more→aximum safety requirements, such as EN 12413. It is compatible with angle grinders.With depressed centre• Reliable Cutting in Metal• Standard for Metal Cutting Disc cuts reliably through metal• The aluminium oxide disc is designed for general use with metalSpecificat
 |
The Best for Ceramic Diamond Cutting Disc delivers clean cuts in tiles for fittings in installation work. Smooth cuts with minimal chipping are made possible by the continuous cutting rim. Additionall more→y, the diamond matrix is optimised to cut through tiles. Use this disc on porcelain, tiles and ceramic. Appropriate for GWS 10,8-76 V-EC Professional cordless angle grinder with 10 mm toolholder • Clean Cuts in Tiles • Best for Ceramic Diamond Cutting Disc delivers clean cuts in tiles • Smooth cuts with minimal chipping are made possible by the continuous cutting rim • Diamond matrix is optimised to cut through tiles Specifications: Diameter mm: 125 Bore diameter mm: 22.23 …
 |
613.99Buy!
£
£
BricoINN
Delivery: in United Kingdom
Report
The Gws 18v-15 Sc Professional Is Bosch´S High-Performing Cordless Grinder That Offers Industrial Power In The 18 V Category. It Delivers Cordless Power Equal To A 1,500 W Corded Grinder Due To Its St more→rong Brushless Motor That Is Fully Optimised For Procore18v Battery Technology, Making Use Of The Battery´S Complete Power. For Highest Convenience, A Bluetooth Connectivity Module Allows For Individual Speed Setting Adjustments. The Grinder Offers Complete Tool Control Due To Kickback Control, Drop Control While Its User Interface Offers Active Tool Feedback.It Is Suitable For Grinding And Cutting Metal. It Is Compatible With All Bosch Professional 18v Batteries And Chargers (Professional 18v Sy…
 |
• Aluminium oxide flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require more→backing pad.• Depressed centre disc suitable for electric and air tools.• Size/Bore: ø125/22mm.
 |
Flap discs have been developed primarily as an alternative to sanding discs and can be fitted directly onto an angle grinder without a backing pad. Lasting up to 25 times longer than sanding discs the more→y also provide a much better finish which will remain constant throughout the life of the disc. These zirconium flap discs suit the majority of metal grinding applications.Si
 |
Use this disc for grinding welding seams and coarse-sanding metal surfaces. Changing flap discs is fast and convenient thanks to the keyless X-LOCK system. X-LOCK flaps discs also fit standard angle g more→rinders.• Excellent Lifetime• X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications&bu
Wire & Cup Brushes212
 |
Price from £2.95
Compare prices3→Compare prices and buy Faithfull Crimped Wire End Brush 25mm 6mm Shank WBS25E
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBS25E Wire End Brush has the following specifications: Type: Flat End. Face Diameter: 25 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £4.49
Compare prices5→Compare prices and buy Bosch 0.2mm Crimped Brass Wire Brush 50mm 6mm Shank 2608622008
The Wire Cup Brush delivers an extra-fine surface finish. This Wire Cup Brush is fitted with brass-coated crimped wire for light-to-medium
 |
Price from £3.49 up to £4.51
Compare prices5→Compare prices and buy Sealey Flat Top Decarbonising Brush 25mm
• Flat trimmed brush with brassed and crimped filaments for extra rigidity.• ø6 x 26mm Shaft.• Trim Length/ø: 28/25mm.Flat trimmed brush with brassed and crimped filaments for extra rigidity more→. ø6 x 26mm Shaft.• Flat trimmed brush with brassed and crimped filaments. • ø6 x 26mm Shaft. • Trim Length/ø: 28/25mm. • Model No. VS1803Technical Specification:N
 |
Price from £4.00 up to £5.79
Compare prices6→Compare prices and buy Draper Wire Brush, 28 x 100mm
For metal cleaning and rust removal. Crimped steel wire fill, 55mm brush length with 6mm diameter shank. Display packed.
 |
Price from £16.99 up to £20.95
Compare prices6→Compare prices and buy Bosch X Lock Knotted Stainless Steel Wire Cup Brush 75mm X-Lock 2608620729
The X-LOCK Heavy for Inox Cup Brush, Knotted Wire provides an aggressive cleaning performance. It is fitted with knotted wire for heavy-duty cleaning applications such as removing heavy rust, paint or more→varnish on medium-to-large surfaces. The wire cup brush can be used on stainless steel, aluminium and non-ferrous metal surfaces. Changing brushes is fast and convenient thanks to the keyless X-LOCK system. It is suitable for use with X-LOCK angle grinders. Wire cup brush – knotted wire, stainless Suitable for heavy duty cleaning work on medium to large stainless steel, aluminium and non-ferrous metal surfaces, such as removing heavy rust or removing paint or varnish. Appropriate for X-LOCK an…
 |
Price from £5.49
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush 60mm 12mm 6mm Shank LES451161
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 12mmWire Height: 20mmOverall Length: 60mmWire Gauge: 0.30.Max Speed: 20,000/rpm.Addi
 |
Price from £3.96 up to £5.77
Compare prices6→Compare prices and buy Draper Decarbonizing Brush Set (2 Piece)
Brassed crimped steel wire brushes with flat and pointed trims. Shanks 6 x 35mm long. Display packed.
 |
Price from £16.99
Compare prices2→Compare prices and buy Bosch Professional Heavy Inox 75x0.5x125 Mm M14 Brush Cup Silver 260862206
Heavy for Inox Wire Cup Brush provides an extra-coarse surface finish. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, prod more→ucing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use with angle grinders with an M14 thread.Features
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
