Total TG12223026
Cutting Discs174
 |
Milwaukee Heavy Duty TORCH Demolition Reciprocating Saw Blade. Strong and Robust 1.06 mm thick body. Shatter resistant bi-metal blade body will bend and flex but not break. Thick 1.06 mm robust torch more→blade body for precise cuts in sheet metal and pipes. 25 mm blade height for improved stability and minimum vibration. Specifications • Blade Length: 230mm • Teeth per Inch: 18 • Max. Cutting Capacity (Inox): 2-4mm • Max. Cutting Capacity (Metal Pipe): 10-160mm • Max. Cutting Capacity (Non Ferrous Metals): 2-8mm • Max. Cutting Capacity (Steel): 2-8mm • Pack Quantity: 25 Features and Benefits • Robust 1.06 mm thick body • Shatter resistant bi-metal blade …
 |
Dewalt DT20655 4 Tooth Brush Cutter Blade For Trimmer 230mm The Dewalt DT20655 is a spare brush cutter blade for the DCM571 and DCM581 garden trimmers. It is perfect for the most demanding and heavy-d more→uty clearing tasks
- Replacement brush cutter blade for the DCM571 and DCM581 trimmers
- Everything from simple grass trimming to heavy-duty clearing work
- High quality blade Specification:
- No. of teeth: 4
- Size: 230mm
- Replacement brush cutter blade for the DCM571 and DCM581 trimmers
- Everything from simple grass trimming to heavy-duty clearing work
- High quality blade Specification:
- No. of teeth: 4
- Size: 230mm
 |
Milwaukee Heavy Duty Demolition Reciprocating Saw Blades. Improved tooth geometry for best speed and double the lifetime. Bi-metal quality cutting teeth with 8% cobalt giving the ultimate in performan more→ce and lifetime. TOUGH NECK: Stamped indentations around the reception strengthens the blade at its weakest point. Slim 0.90 mm thick blade body optimised for maximum speed and flexibility. Specifications • Blade Length: 230mm • Teeth per Inch: 14 • Max. Cutting Capacity (Aluminium): 3-10mm • Max. Cutting Capacity (Inox): 2-4mm • Max. Cutting Capacity (Metal Pipe): 10-160mm • Max. Cutting Capacity (Non Ferrous Metals): 3-10mm • Max. Cutting Capacity (Steel): 3-10mm …
 |
Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs wit more→h a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure …
 |
Up to 30x longer lifespan - The Diamond Metal Wheel has up to 30x longer lifespan when cutting metal. Its steel body with diamond cutting edge is extremely robust and the disc maintains the same cutti more→ng depth and constant speed throughout its long lifespan. Thanks to Bosch's Diamond Technology the disc does not shatter if dropped and produces no chemical smell or extra dust during cutting. It is intended for cutting metals including steel, cast iron, stainless steel and copper. Bosch Diamond Metal Wheels comply with the highest safety requirements, such as EN 13236 It is designed for use with large angle grinders. It features increased safety and healthy cutting. With 22.23 mm bore for standard …
 |
Fast Powerful Cutting - The Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced phenol resin, wh more→ich copes with demanding applications while delivering good results. Moreover, the disc's precision-manuf
 |
This segmented diamond wheel is compatible with the Makita DCE090 twin 18V Cordless Power Cutter for fast cutting. The Diamond Blade is suitable for use on concrete, stone and masonry, wet or dry cutt more→ing. Features & Benefits • For fast cutting • Compatible with Makita DCE090 twin 18V Cordless Power Cutter • Segmented diamond wheel • For use on concrete, stone, masonry • Dry or wet cutting Specifications • Diameter: 230mm • Bore: 22.23mm
 |
Lasts up to 4x longer than a standard multi material diamond disc - On modern construction sites you need to cut a wide variety of hard materials, and these take their toll on tools. The EXPERT MultiM more→aterial Disc is the ideal accessory for busy construction professionals needing to cut concrete, brick, roofing tiles and reinforced concrete - because it simply keeps doing the job for longer. The high segments on this cutting disc are made from an advanced matrix of metal and diamonds, which is designed to stay razor sharp. These segments are laser-welded onto a hard steel body; and the sides are fluted to remove dust for efficiency and longevity. This mix of optimum diamond grits and advanced …
Wire & Cup Brushes329
 |
Price from £31.95
Compare prices3→Compare prices and buy Lessmann Knot End Wire Brush 29mm 6mm Shank 456278
The Lessmann Knot End Brushes are fitted with a 6mm shank. When the brush is in rotation it will open up and increase in diameter. This enables the operator to work in hard to reach areas such as dril more→led holes and recesses of all kinds.The Lessmann Knot End Brush With Shank has the following specification: Diameter: 29mm.Wire: 0.35 Steel.Additiona
 |
Price from £4.95
Compare prices4→Compare prices and buy Stanley Crimped Steel Wire Wheel Brush 50mm 6mm Shank STA36020
These Stanley crimped wire wheels are ideal for cleaning and preparing surfaces. They are designed for use in drill chucks and can be used with standard corded or cordless drills. The high tensile ste more→el wire is heat treated for durability. An innovative internal holding plate construction helps to reduce wire movement for increased control and longer product lifetime. Features & Benefits • For use with electric drills • Suitable for corded and cordless machines • Ideal for cleaning and surface preparation Specifications • Wheel Diameter: 50mm • Wheel Thickness: 10mm • Shank Diameter: 6mm
 |
Price from £24.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Knot Wheel Brush 115mm 22.2mm Bore LES472211
The Lessmann Knot Wheel Brushes are for grinders, angle grinders and stationary machines, used in the preparation and re-working of bolt fillet and butt welds. They remove scale, rust, paint, slag, ru more→bber residue and can be used for de-burring. They are filled with a special high tensile strength steel wire in order to meet the exacting requirements during use.This Lessmann Knot Wheel Brush has the following specification: Diameter: 115mm.Width: 14mm.Bore: 22.2mm.Wire Gauge: 0.50.Wire Type: Steel.Max RPM: 12,500/min.Addi
 |
Price from £6.85 up to £9.11
Compare prices7→Compare prices and buy Draper Crimped Wire Cup Brush, 80mm, M14
Manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. M14 thread. Display packed.
 |
Price from £13.95
Compare prices4→Compare prices and buy Stanley Twist Knot Wire Cup Brush 70mm M14 Thread STA36080
Fitted with an M14 thread for connection to angle grinders, this twist knot steel wire cup brush is ideal for aggressive paint and rust removal or general suface preparation work on metal and stone su more→rfaces. Stanley cup brushes have an internal holding plate for improved consistency and safety. Features and Benefits • Standard M14 thread • Suitable for corded or cordless angle grinders • Heavy duty carbon steel bristles • Excellent for rust and paint removal Specifications • Stanley Part No: STA36080 • Connection: M14 • Diameter: 70mm • Max Rotation Speed: 12,000 RPM
 |
Price from £2.49
Compare prices3→Compare prices and buy Faithfull Crimped Wire Wheel Brush 50mm 6mm Shank WBS50C
This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and des more→igned to operate with power tools up to a maximum of 4,500/min. Shaft: 6mm (1/4in). Wire: 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.Diame
 |
Price from £46.95
Compare prices3→Compare prices and buy Lessmann 0.5 Stainless Steel Wire Knot Wheel Brush 115mm 22.2mm Bore LES47
The Lessmann Knot Wheel Brushes are for grinders, angle grinders and stationary machines, used in the preparation and re-working of bolt fillet and butt welds. They remove scale, rust, paint, slag, ru more→bber residue and can be used for de-burring. They are filled with a special high tensile strength steel wire in order to meet the exacting requirements during use.This Lessmann Knot Wheel Brush has the following specification: Diameter: 115mm.Width: 14mm.Bore: 22.2mm.Wire Gauge: 0.50.Wire Type: Stainless Steel.Max RPM: 12,500/min.Addi
 |
Price from £14.95
Compare prices4→Compare prices and buy Bosch X Lock Crimped Steel Wire Cup Brush 75mm X-Lock 2608620725
Extra-Fine Surface Finish on Metal - The X-LOCK Clean for Metal Cup Brush, Crimped Wire provides an extra-fine surface finish. Fitted with crimped wire for light-to-medium
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
