Triton UShM 125-1000 (25-100-01)
Cutting Discs240
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
These Makita Tungsten Carbide Grit Blades for X-LOCK grinders are suitable for cutting a variety of materials including plaster board, PVC, FRP & copper. Supports the X-LOCK system which allows for sa more→fe and easy disc installation and removal. Specifications • Diameter: 125 mm • Fitting: X-LOCK • Thickness: 2mm • Pack Quantity: 1 • TC Grit: 30/40 Features & Benefits • Suitable for cutting a variety of materials including plaster board, PVC, FRP & copper • Supports the X-LOCK system which allows for safe and easy disc installation and removal
 |
Lasts up to 4x longer than a standard multi material diamond disc - On modern construction sites you need to cut a wide variety of hard materials, and these take their toll on tools. The EXPERT MultiM more→aterial Disc is the ideal accessory for busy construction professionals needing to cut concrete, brick, roofing tiles and reinforced concrete - because it simply keeps doing the job for longer. The high segments on this cutting disc are made from an advanced matrix of metal and diamonds, which is designed to stay razor sharp. These segments are laser-welded onto a hard steel body; and the sides are fluted to remove dust for efficiency and longevity. This mix of optimum diamond grits and advanced …
 |
Cuts materials that angle grinders previously couldn’t - Professionals value angle grinders for their ability to cut tough materials like concrete, stone and metal. With the EXPERT Carbide Multi Wheel more→this wonderful tool can be even more versatile, efficiently cutting all kinds of softer materials such as wood, plastic and modern composites. The EXPERT Carbide Multi Wheel uses sharp carbide grits on its rim to cut multiple materials extremely effectively. The grits are joined to a steel body by a laser technique for an extra strong bond, giving a safe and reliable cutting disc that maintains a constant speed and depth throughout a long lifespan. With the EXPERT Carbide Multi Wheel, your angle gr…
 |
Professionals Value Angle Grinders For Their Ability To Cut Tough Materials Like Concrete, Stone And Metal. With The Expert Carbide Multi Wheel This Wonderful Tool Can Be Even More Versatile, Efficien more→tly Cutting All Kinds Of Softer Materials Such As Wood, Plastic And Modern Composites. With The Expert Carbide Multi Wheel, Your Angle Grinder Becomes Even More Versatile. For Many Tradesmen, It May Be The Only Power Tool They Need.Features:- Exceptional Durability Is Built In With Bosch Carbide Technology.- Advanced Steel Body Keeps Constant Speed And Depth.- Extra Strong Laser Bonding Of Carbide Grit And Steel Body.- Long Life Cutting Multiple Materials- Click It On With X-Lock – The Fastest Ac…
 |
Features:- For reliable cutting in general building material- Optimized diamond matrix in high quality standard for solid results
 |
Lasts up to 4x longer than a standard multi material diamond disc - On modern construction sites you need to cut a wide variety of hard materials, and these take their toll on tools. The EXPERT MultiM more→aterial Disc is the ideal accessory for busy construction professionals needing to cut concrete, brick, roofing tiles and reinforced concrete - because it simply keeps doing the job for longer. The high segments on this cutting disc are made from an advanced matrix of metal and diamonds, which is designed to stay razor sharp. These segments are laser-welded onto a hard steel body; and the sides are fluted to remove dust for efficiency and longevity. This mix of optimum diamond grits and advanced …
 |
These Makita Type 41 Pro Cutting discs are designed for fast clean cutting and are particularly suitable for use with cordless angle grinders for around 40% longer battery life over a standard cutting more→wheel. They are manufactured from high quality bonded 60G aluminium oxide for long life and are suitable for cutting steel and stainless steel. Please note generic stock image shown for illustration purposes only. Refer to the description for the specifications. Specifications • Diameter: 125mm • Thickness: 1.2mm • Bore: 22.23mm Contents • 10 Discs
Wire & Cup Brushes322
 |
Price from £3.32 up to £4.78
Compare prices8→Compare prices and buy Draper Rotary Wire Brush, 6 x 75mm
Brassed crimped steel wire with 6mm diameter shank. Display packed.
 |
Price from £27.95
Compare prices3→Compare prices and buy Lessmann X Lock Non Sparking Knotted Wire Wheel 125mm X-Lock
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting, they can be used for polishing, light deburring work, and removing rust, paint, dir more→t, and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses, car workshops, and by staircase, railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Steel Knot Wheel Brush 125mm Non Spark
 |
Price from £19.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Conical Knot Brush 100mm M14 Thread
The Lessmann Conical Knot Brushes with left hand twisted knots to increase stability. The special shape of the conical brushes enables the user to work in hard to reach places. They have been designed more→for heavy-duty use, for the preparing of metal surfaces before painting, and the removal of slag, rust, scale, or concrete waste.Diameter. 100mm.Width. 10mm.Bore. M14.Wire Gauge. 0.50.Wire Type. Steel.Max R.P.M. 12,500Additiona
 |
Price from £10.95
Compare prices3→Compare prices and buy Lessmann Crimped Steel Wire Cup Brush 60mm M14 x 2.0 Thread
The Lessmann Cup Brushes are filled with crimped wire and are ideal for working on large surfaces. They can also be used for the removal of rust, paint, dirt or scale and for polishing. A range of siz more→es and wire styles are available.Diame
 |
Price from £14.95
Compare prices3→Compare prices and buy Lessmann 0.3 Steel Wire Cup Brush 50mm 6mm Shank
The Lessmann Cup Brush is fitted with 6mm shank and is ideal for working on medium to large areas. They are generally used for the removal of rust, paint, dirt or scale, and for polishing.Diame
 |
Price from £7.49 up to £8.23
Compare prices6→Compare prices and buy Sealey Twist Knot Wire Cup Brush Ø65mm M10 x 1.5mm
• Suitable for use with power tools up to the maximum rated rpm.• Twisted steel filaments give more aggressive cleaning action - ideal for heavy rust removal.Suitabl
 |
Price from £8.95 up to £13.99
Compare prices4→Compare prices and buy Faithfull Wire Cup Brush 75 X M14 X2 S/S 0,30Mm, Green FAIWBC75S
Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for industrial use a more→nd more specialist applications. Features: For use on s/less steel and heavier duty applications M14 thread mount M14 thread mount Specifications: Dimensions: H:11.0 x W:6.0 x D:9.0 cm Colour: Green Guarantee:5 years Material: Steel Model Number: FAIWBC75S
 |
Price from £5.61 up to £6.95
Compare prices5→Compare prices and buy Draper Brassed Steel Crimped Wire Brush Set (3 Piece)
• Set includes a 25mm wire end brush, 50mm wire cup brush, and a 50mm wire wheel brush • Designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces • Harde more→ned dipped brassed steel wire • Strong construction with crimping action • Suitable for cleaning, deburring and surface preparation • Fitted with a non-slip 6.35mm hex shank • Compatible with most drill drivers and drills with a 13mm chuckThis set of wire brushes is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The brushes are made from hardened dipped brassed steel wire, which gives a high level of durability and resistance to oxidation. …
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
