Trotec PAGS 10-125 (4440000005)
Cutting Discs169
 |
18.71Buy!
£
£
Electricalworld.com
Delivery: in United Kingdom
Report
• Will cut through the toughest of materials; reinforced concrete, steel and cast iron.• Laser welded segments.Will cut through the toughest of materials; reinforced concrete, steel and cast iron. Las more→er welded segments.Techni
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Impressive Removal Rate - The X551 Expert for Metal has an impressive material removal rate on metal surfaces. The zirconia alumina and semi-friable aluminium oxide abrasive grit blend delivers a bril more→liant removal rate and lifetime on metal applications. Furthermore, its highly robust X-cloth with stable backing ensures durability and steady performances on tough surfaces. The grit is bonded using fully synthetic resin on X-cloth for optimal sanding behaviour. It is intended for deburring and welding preparation on carbon steel, mild steel, aluminium, non-ferrous metals and cast iron. It is also ideal for removing discolouration, stock and surface imperfections. The X551 Expert for Metal is …
 |
The CorePlus Mortar Raking Diamond Blade has hard, 10mm tall segments, specifically designed for removing a range of mortars prior to pointing. A precision-engin
 |
Diamond Cutter / Concrete / Quantity 1 Piece / Disc Diameter 125 mm / Disc Thickness 2 mm / Bore 22.23 mm
 |
• Aluminium oxide flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require more→backing pad.• Depressed centre disc suitable for electric and air tools.• Size/Bore: ø125/22mm.
 |
Makita's Diamak Diamond Cutting Discs with segmented rim. The segmented blade is designed to cut most masonry materials including Masonry, brick, block, light concrete, sandstone, limestone and slate. more→Specifications • Diameter: 125mm • Bore: 22.23mm • Ring: 20mm • Pack Quantity: 1
Wire & Cup Brushes217
 |
Price from £14.95
Compare prices4→Compare prices and buy Bosch X Lock Crimped Steel Wire Cup Brush 75mm X-Lock
Extra-Fine Surface Finish on Metal - The X-LOCK Clean for Metal Cup Brush, Crimped Wire provides an extra-fine surface finish. Fitted with crimped wire for light-to-medium
 |
Price from £17.95 up to £23.36
Compare prices7→Compare prices and buy Draper Expert Crimped Wire Cup Brush, 80mm, M14
Expert Quality, industrial quality manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. Carton packed.
 |
Price from £4.49
Compare prices5→Compare prices and buy Bosch 0.2mm Crimped Brass Wire Brush 50mm 6mm Shank
Fine Finish on Steel - The Wire Cup Brush delivers an extra-fine surface finish. This Wire Cup Brush is fitted with brass-coated crimped wire for light-to-medium
 |
Price from £16.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Knot Cup Brush 65mm M10 x 2.0 Thread
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special s more→teel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Diameter. 65mm.Bore. M10.Wire Gauge. 0.50. Wire Type. Steel.Max. R.P.M. 12,500.Addition
 |
Price from £6.49
Compare prices3→Compare prices and buy BlueSpot Bevelled Crimped Steel Wire Cup Brush 115mm M14 Thread
The BlueSpot Tools Steel Bevel Wire Cup Brush is manufactured from hardened steel wire for increased durability. Ideal for preparing metal surfaces for welding and painting. Specifications: Wire: 0.3m more→m.Diameter: 115mm (4 1/2in) / M14 x 2 Fitting.Maximum safe speed: 12,500 RPM.Additional Information:&bu
 |
Price from £7.95 up to £11.99
Compare prices4→Compare prices and buy Faithfull Wire Cup Brush T/Knot 65 X M14X2 0,5Mm, Multi FAIWBT65
Twist Knot Wire Cup Brush for heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Designed for use with a compatible thread angle grinder. Suitable for industria more→l use and more specialist applications. Features: For heavier duty applications For use with angle grinders For use with angle grinders Specifications: Dimensions: H:11.0 x W:6.0 x D:9.0 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBT65
 |
Price from £6.77 up to £7.56
Compare prices6→Compare prices and buy Sealey Conical Wire Brush Ø100mm M10 x 1.5mm
• Suitable for use with power tools up to the maximum rated rpm.• Twisted steel filaments give more aggressive cleaning action - ideal for heavy rust removal.Suitabl
 |
Price from £10.95 up to £13.46
Compare prices7→Compare prices and buy Sealey Twist Knot Wire Cup Brush Ø100mm M14 x 2mm
• Suitable for use with power tools up to the maximum rated rpm.• Twisted steel filaments give more aggressive cleaning action - ideal for heavy rust removal.Suitabl
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
