Tryton TDS125A
Cutting Discs231
 |
Faithfull Zirconia Abrasive Jumbo Flap Discs are designed for use on angle grinders. Jumbo discs contain up to 40% more abrasive than standard flap discs. Manufactured from long lasting Zirconia Alumi more→na and are resin bonded for extra strength. Suitable for use on wood metal plastic and stainless steel. The slightly conical shape is ideal for grinding at 15–25-deg
 |
Bevels tubes as they cut and lasts longer than conventional cutting wheels.Features
 |
Makita's B-38560 Anti-Vibration Offset Diamond Wheel features 2 small shock absorbers within the flange system. These work to absorb vibration, limiting transferred vibration to machine and end user. more→The rubber rings also reduce tapping, allowing for smooth and efficient grinding. Not compatible with the PC5000. Features and Benefits • Low vibration • Less tapping • Segmented Diamond • High efficiency Specifications • Application: Dry grinding with concrete/granit
 |
These Makita Type 41 Pro Cutting discs are designed for fast clean cutting and are particularly suitable for use with cordless angle grinders for around 40% longer battery life over a standard cutting more→wheel. They are manufactured from high quality bonded 60G aluminium oxide for long life and are suitable for cutting steel and stainless steel. Please note generic stock image shown for illustration purposes only. Refer to the description for the specifications. Specifications • Diameter: 125mm • Thickness: 1.2mm • Bore: 22.23mm Contents • 10 Discs
 |
30.99Buy!
£
£
BricoINN
Delivery: in United Kingdom
Report
Expert For Concrete High Speed Diamond Grinding HeadFeatures:Ex
 |
Makita's Diamak Diamond Cutting Discs with segmented rim. The segmented blade is designed to cut most masonry materials including Masonry, brick, block, light concrete, sandstone, limestone and slate. more→Specifications • Diameter: 125mm • Bore: 22.23mm • Ring: 20mm • Pack Quantity: 1
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Reliable Performance - The Standard for Inox Rapido Cutting Disc enables reliable performance in Inox. Its thin disc edge supports smooth and easy cutting. In addition, the disc is free from ferrous, more→sulphurous and chlorinated fillers. Use this disc for cutting Inox. It is compatible with angle grinders. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Performance in Inox • Standard for Inox Rapido Cutting Disc performs reliably in Inox • The thin disc edge supports smooth and easy cutting Specifications Specification: WA 60 T BF Diameter: 125mm Bore …
Wire & Cup Brushes303
 |
Price from £3.24 up to £4.99
Compare prices6→Compare prices and buy Faithfull 0106014130 Wire Cup Brush 60Mm M14X2 0.30Mm Steel Wire FAIWBC60
Faithfull Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for indus more→trial use and more specialist applications.Th
 |
Price from £4.00 up to £4.49
Compare prices5→Compare prices and buy BlueSpot Tools 19215 Twist Knot Cup Brush 75Mm M14 X 2 B/S19215
BlueSpot Tools Twist Knot Cup Brushes are manufactured from hardened steel wire for increased durability. Twisted steel filaments provide quick and efficient cleaning action. Ideal for removal of dirt more→paint rust scale slag concrete and other hardened materials.This BlueSpot Tools Twist Knot Cup Brush has the following specifications: Diameter: 75mm (3in) / M14 x 2 Fitting.Max. Safe Speed: 12500 RPM.PTDB/S19215
 |
Price from £1.89 up to £2.49
Compare prices6→Compare prices and buy BlueSpot Tools 19222 Flat Steel Wire Wheel Brush 75Mm X 6Mm Arbor B/S19222
The BlueSpot Tools Flat Wire Wheel Brush is ideal for preparing metal surfaces for welding and painting. Its 6mm (1/4in) shank fits most electric drills.This BlueSpot Tools Flat Steel Wire Wheel Brush more→has the following specifications: Shank: 6mm (1/4in).Wire: 0.3mm.Diameter: 75mm.Max. Safe Speed: 4 500 RPM.PTDB/S19222
 |
Price from £45.43 up to £52.95
Compare prices5→Compare prices and buy Lessmann 473.81X X-Lock Stainless Steel Knot Wheel Brush 125Mm Non Spark LES47381X
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting they can be used for polishing light deburring work and removing rust paint dir more→t and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses car workshops and by staircase railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Stainless Steel Knot Wheel Brush 125mm Non SparkPTDLES4738
 |
Price from £6.49
Compare prices5→Compare prices and buy Bosch 0.2mm Crimped Inox Steel Wire Pencil Brush 15mm 6mm Shank 2608622126
Fine Finish on Stainless Steel - The End Brush provides a good fine surface finish. It is fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces. Due to its shape, more→the end brush is ideal for cleaning work in very hard-to-reach areas on stainless steel, aluminium and non-ferrous metal surfaces as well as in corners and the inside of pipes and profiles. It is also suitable for removing rust, roughing, matt sanding and paint stripping. It is intended for use with drills with a 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while …
 |
Price from £13.95
Compare prices5→Compare prices and buy Stanley Twist Knot Wire Cup Brush 70mm M14 Thread STA36080
Fitted with an M14 thread for connection to angle grinders, this twist knot steel wire cup brush is ideal for aggressive paint and rust removal or general suface preparation work on metal and stone su more→rfaces. Stanley cup brushes have an internal holding plate for improved consistency and safety. Features and Benefits • Standard M14 thread • Suitable for corded or cordless angle grinders • Heavy duty carbon steel bristles • Excellent for rust and paint removal Specifications • Stanley Part No: STA36080 • Connection: M14 • Diameter: 70mm • Max Rotation Speed: 12,000 RPM
 |
Price from £37.95
Compare prices5→Compare prices and buy Bosch 0.5mm Knotted Steel Wire Cup Brush 100mm M14 Thread 2608622010
Extra-Coarse Finish - The Heavy for Metal Wire Cup Brush provides an extra-coarse surface finish. This cup brush is fitted with knotted wire for heavy-duty cleaning applications. Ideal for use in meta more→l, it is suitable for cleaning work on medium to large steel surfaces, such as removing heavy rust, underseal, paint or varnish. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. Fits GGS 6 and GGS 8 straight grinders with M14 thread. Features and Benefits …
 |
Price from £3.42 up to £4.95
Compare prices6→Compare prices and buy Draper 41436 Steel Crimped Tube Brush 28Mm each 1
This wire tube brush is designed for cleaning tubes gratings sleeves and cylinders made from ferrous metals. The bristles are made from hardened steel wire which gives a high level of durability an more→d performance. The brush is strong enough to provide reliable performance and the crimping is flexible to tackle recessed areas and irregular surfaces. Fitted with a 6mm twisted shank. Compatible with most drill drivers and drills with a 13mm chuck.PTDDRPDIR
Important!
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
