Tryton TDS125RK
Cutting Discs240
 |
The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into more→place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock cutting discs can be used in standard angle grinders as well as X Lock machines. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in …
 |
• Aluminium oxide flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require more→backing pad.• Depressed centre disc suitable for electric and air tools.• Size/Bore: ø125/22mm.
 |
The Tiles Used In Modern Construction Are Often Large, Very Hard And Expensive. Cutting Them To A High Standard Every Time Is Therefore Crucial Yet Difficult. The Expert Hardceramic Tile-Cutting Disc more→Uses Diamond Technology And A Range Of Design Features To Deliver The Best Results Consistently, Even In The Hardest Ceramics. The Bosch Expert Hardceramic X-Lock Diamond Tile Cutting Disc Offers The Best Cut In Hard Tiles. You Can Be Confident Of Achieving A Professional Finish On Every Job With This Diamond Cutting Disc.Features: - Clean, High Quality Cutting With Bosch Diamond Technology.- Chip-Free Cut With Purpose-Designe
 |
Impressive Removal Rate - The X551 Expert for Metal has an impressive material removal rate on metal surfaces. The zirconia alumina and semi-friable aluminium oxide abrasive grit blend delivers a bril more→liant removal rate and lifetime on metal applications. Furthermore, its highly robust X-cloth with stable backing ensures durability and steady performances on tough surfaces. The grit is bonded using fully synthetic resin on X-cloth for optimal sanding behaviour. It is intended for deburring and welding preparation on carbon steel, mild steel, aluminium, non-ferrous metals and cast iron. It is also ideal for removing discolouration, stock and surface imperfections. The X551 Expert for Metal is …
 |
Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs wit more→h a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that …
 |
83.99Buy!
£
£
BricoINN
Delivery: in United Kingdom
Report
Finding an easy-to-use and comfortable angle grinder for everyday use can be a challenge. That´s why we designed the GWS 12 product family. The GWS 12-125 Professional is compact, practical, economica more→l and powerful at the same time. When using this tool, you´ll experience more comfort and less fatigue thanks to its ergonomic design with smaller gripping surface. The motor is robust and powerful, and has a good overload capacity to speed up work progress in common metal applications. For easy handling, the tool is equipped with a tool-free adjustment guard and a lockable switch. It also features restart protection and we´ve included a plastic guard with clip lock for cutting applications in our…
 |
Flap discs have been developed primarily as an alternative to sanding discs and can be fitted directly onto an angle grinder without a backing pad. Lasting up to 25 times longer than sanding discs the more→y also provide a much better finish which will remain constant throughout the life of the disc. These zirconium flap discs suit the majority of metal grinding applications.Si
Wire & Cup Brushes326
 |
Price from £3.33 up to £4.81
Compare prices8→Compare prices and buy Draper Rotary Wire Brush, 6 x 75mm
Brassed crimped steel wire with 6mm diameter shank. Display packed.
 |
Price from £17.95 up to £21.99
Compare prices4→Compare prices and buy Faithfull Wire Cup Brush 150 X M14 X2 0,30Mm, Red FAIWBC150
Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for industrial use a more→nd more specialist applications. Features: For cleaning metal surfaces prior to painting M14 thread mount M14 thread mount Specifications: Dimensions: H:18.0 x W:10.5 x D:16.0 cm Colour: Red Guarantee:5 years Material: Metal Model Number: FAIWBC150
 |
Price from £4.49
Compare prices3→Compare prices and buy BlueSpot Twist Knot Wire Cup Brush 75mm M14 Thread
BlueSpot Tools Twist Knot Cup Brushes are manufactured from hardened steel wire for increased durability. Twisted steel filaments provide quick and efficient cleaning action. Ideal for removal of dirt more→, paint, rust, scale, slag, concrete and other hardened materials.This BlueSpot Tools Twist Knot Cup Brush has the following specifications: Diameter: 75mm (3in) / M14 x 2 Fitting.Max. Safe Speed: 12500 RPM.Additional Information:&bu
 |
Price from £6.95
Compare prices4→Compare prices and buy Stanley Crimped Steel Wire Cup Brush 25mm 6mm Shank
Designed for use with electric drills, this Stanley crimped wire brush is ideal for removing light rust and for general surface preparation tasks on metal. Features & Benefits • Crimped steel wir more→es • Less aggressive than twist knot brushes • Suitable for various metal preparation tasks • Designed for use in a standard electric drill Specifications • Diameter: 25mm • Pack Quantity: 1
 |
Price from £30.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Conical Knot Brush 115mm M14 Thread
The Lessmann Conical Knot Brushes with left hand twisted knots to increase stability. The special shape of the conical brushes enables the user to work in hard to reach places. They have been designed more→for heavy-duty use, for the preparing of metal surfaces before painting, and the removal of slag, rust, scale, or concrete waste.Diameter. 115mm.Width.10m
 |
Price from £23.95 up to £24.99
Compare prices4→Compare prices and buy Lessmann X Lock Non Sparking Crimped Wire Wheel 115mm X-Lock
These Lessmann X-Lock non-sparking brushes are suitable for use on hand-held angle grinders with the X-Lock fitting, they can be used for polishing, light deburring work, and removing rust, paint, dir more→t, and scale. The brush with steel wire is used for flexible work on large steel surfaces. The high-grade 'Made in Germany' quality is often used in the metalworking industry and in craft businesses, car workshops, and by staircase, railing and container builders. Features of the wire brushes are their dense filling and precise concentricity.1 x Lessmann X-Lock Crimped Steel Bevel Brush 115mm Non Spark
 |
Price from £3.49
Compare prices3→Compare prices and buy Faithfull Crimped Wire Wheel Brush 100mm 6mm Shank
This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and des more→igned to operate with power tools up to a maximum of 4,500/min. Shaft: 6mm (1/4in). Wire: 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.Diame
 |
Price from £2.95
Compare prices3→Compare prices and buy Faithfull Point End Crimped Wire Brush 12mm 6mm Shank
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12P Wire End Brush has the following specifications: Type: Pointed end. Face diameter: 12/60 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
