Tryton TF1201
Diamond Core Bits & Milling Cutters1650
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/4 • Dia Metric: 7 more→.5 • Dia Imperial: 19/64 • Cut Length Metric: 19 • Overall Length Metric: 51
 |
Spare ball bearings for cutters. Specifications • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Sawbore: 6.35 • Sawbore Imperial: 1/4
 |
For veining, panelling, 'V' grooving, bevelling & chamfering. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 12.7 • Cut Leng more→th Imperial: 1/2 • Overall Length Metric: 52.7 • Bearing Dia Metric: 12.7 • Angle: 45
 |
Trend Craft Pro 1/4in shank bearing guided round over router cutter - 1.6mm radius Two Flute Carbide tips. Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timb more→er and timber based materials. Leaves perfect superfine round over detail for a contemporary eased edge arris profile on straight and curved edges. Two bearings supplied for round over or quirked Ovolo moulding for additional options for fine detailing on boxes and modelmaking work. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications …
 |
Trend Craft Pro 1/4in shank bearing guided round over router cutter - 6mm radius Two Flute Carbide tips. Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber more→and timber based materials. Bearing guided classic round over detail for edge detailing on curved and straight work with additional bearing for quirked Ovolo detail option. 6mm radius ideal for lighter round over and Ovolo detail or bullnosing on thinner stock. 1/4in shank for smaller routers and easy control for hand held use. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to …
 |
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications • Shank Diameter: 8 mm • Dia Metric: 28.5 • Dia Imperial: 1 1/8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 64 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 7.9 • Radius 1 Imperial: 5/16
 |
Trend Joinery Two flute carbide TCT tips for cutting biscuit slots in timber and timber based materials. Supplied with three interchangeable bearings covering biscuit sizes 0, 10 and 20 covering furni more→ture and joinery applications. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity.
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 11 • Dia Imperial: 7/16 • Cut Length Metric: 25 • Overall Length Metric: 69
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
