VERTO 52G710
Diamond Core Bits & Milling Cutters1916
 |
Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 5- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive m more→aterial. Fine finish. Up-cut prevents burning in plunge cuts. High feed speed. Two flute. Specifications • Shank Diameter: 1/4 • Dia Metric: 3.96 • Dia Imperial: 5/32 • Cut Length Metric: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 63.5 • Overall Length Imperial: 2 1/2 • Type or Grade: Up-cut
 |
Purpose made for stair housing jigs. Ensures tight fit of tread in string. Specifications • Shank Diameter: 1/2 • Dia Metric: 22 • Dia Imperial: 7/8 • Cut Length Metric: 26 &b more→ull; Cut Length Imperial: 1 • Overall Length Metric: 63.5 • Type or Grade: LH • Angle: 95
 |
Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Impe more→rial: 1/2 • Cut Length Metric: 6.5 • Overall Length Metric: 54 • Angle: 45
 |
Trend Snappy 9.5mm diameter countersink - with adjustable drill 9.5mm diameter countersink for up to 10 gauge Imperial screws. The perfect, fast swap accessory for clean, consistent finishes." Ma more→de from hardened tool steel for assured performance. Ideally suited to hard and softwoods alike." Fitted with high quality 3.25mm diameter replaceable HSS (High Speed Steel) piloting drill for No 10 Imperial screws in softwood or No8 screws in hardwood. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend Snappy SNAP/PC/95T or SNAP/PC/38 Plug Cutters for applications …
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 25 • Dia Imperial: 63/64 • Cut Length Metric: 25 • Overall Length Metric: 65
 |
For coves and part of a rule joint. Specifications • Shank Diameter: 1/2 • Dia Metric: 20 • Cut Length Metric: 18 • Overall Length Metric: 57 • Radius 1 Metric: 10
 |
Trend Professional HSSE 8mm shank straight router cutter - 5mm diameter for aluminium and plastics 5mm diameter X 12mm cut length for specialist routing of UPVC aluminium and anodised aluminium on CN more→C machines. The ideal cutter for slotting, grooving and milling clean accurate apertures for aluminium components. Single flute helical up cut for shearing cut and fast clearance of waste for the cleanest of cuts. Manufactured from special grade HSSE for increased durability when machining the most abrasive anodised finishes. 8mm shank for increased support under load. With 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 8 mm • Dia Metric: 5 • …
 |
Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approxim more→ate 3mm overlap should be left before copy profiling. When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Downcut to prevent breakout on veneer. Specifications • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 25 • Overall Length Metric: 69 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
